Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Fly your flag anywhere you park your RV or vehicle. This flagpole holder mounts to a standard 2" hitch receiver and holds a flagpole up to 2" in diameter. Thumbscrew tightens the pole into place. Powder coat finish adds durability.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, neighbors and friends. Steven here with etrailer.com. Today we're looking at our CAMCO hitch mounted flagpole holder for a two inch hitch receiver. That's right folks, so with this flagpole holder, you can simply mount it inside that two inch by two inch hitch receiver, put in your hitch pin, you can fly a flag whenever and anywhere you want to park your vehicle. So it's gonna be great for tailgating, those kind of events, football games, baseball games, wherever you're at, hockey, et cetera, et cetera. Or if you just wanna be patriotic and put a flag out on a certain day of the year or whatnot.
You get a nice set screw here at the top. That's gonna allow for you to insert the pole and then tighten it down to whatever height. And the bottom here has a hole in it for draining out liquids such as water, that kind of stuff, condensation. The hitch pin here, or hitch pin hole rather, there's a 5/8 standard hole size. Hitch pin and clip is sold separately.
This is a nice durable metallic finish. It's a black powder coat finish, nice and smooth, kind of glossy. And it can hold a flagpole up to two inches in diameter on that. Now I'll throw an image up of all the dimensions here for you. Overall, the height, we're looking at 19 and 5/8 inches, top to bottom, two and a half inch outer diameter on that tube there, nine and a half inches from the top of the tube down to the gusset.
The gusset's four and a half inches out from the rod. 17 and 1/4 inches overall from the rod to the end of the hitch and three quarter inches, or three and one quarter inches, sorry, the short round tube on the bottom up to the bottom of the hitch tube and from the edge of the tube to the center of the hitch pin hole is 15 and 1/4 inches long. Well, folks, that's gonna wrap it up for our look at this CAMCO hitch mounted flagpole holder. Again, it can hold a two inch round flag pole itself. I'm Steven, thanks so much for watching.
Thanks for all your support, all of our veterans out there. Have a great day.
Fits a standard 2” receiver and accepts most brand telescoping flag pulls. I drilled a hole the post so I could lock the flag pole in with a hitch lock.
The construction is good (so far). I felt the need to drill new holes for the hitch pin so the mount didn’t stick so far out from the back of my truck. The mounting tube is 2.5” in diameter and my flag pole is only 7/8” in diameter. I had to use pipe insulation on my flag pole to take out the “play” in the pole. Two bolts in the tube to secure the flag would be better than the one supplied and a longer one would be nice as I had to replace the stock one because it was too short. I think I’m happy after the modifications, but haven’t taken the truck for a test run.
Finally had some time to get my hitch flag pole up an showing my colors. Will be able to show them wherever I go, front or back. Thanks for you help.
Product is made in China so...but...it is sturdy enough for my purposes. The hole for the flag is 2 inches so you'll need one that big for proper fitting. You also need a trailer pin as well to secure in the hitch, it does not come with one. For the price it is exactly what I wanted. The thing that impressed me the most was how fast it arrived at my door. I paid extra for 2 day shipping and it arrived in two days. Gotta love that. I will do business with etrailer.com again.
Great product only problem it didn't come with pins to secure to the hitch. Should have
This is exactly what I expected. Have used it a year and meets my needs. I ordered it for flag pole and clothes line pole.
Not a very bright engineer that drew up the plans on this one!
Just another couple inches on the receiver bar and you could have put a patio umbrella in the tube (and while you're at it leave the bottom of the tube open(cheaper to manufacture)) and OPENED your tailgate and sat under the shade!!! Unfortunately this is impossible. SO SAD.
I think I'll manufacture my own and run this guy out of business!!
Purchased so we can fly our beloved American Flag on the back of our fifth-wheel camper. Fits our 2” hitch receiver perfectly. Now we fly our 20’ flag pole over our camper, it looks great! Great product! God Bless America!
Quick delivery, product fits well on my Jeep Wrangler, even with an over sized spare on the back- the flag pole holder up tube clears everything.
Rock solid construction. I plan to use the unit to support my fiber glass telescoping pole for deployment of a portable amateur radio antenna.
I purchased to use as an umbrella holder behind my pickup when parked. Corner gusset adds quite a bit of rigidity. Perfect for my application.
Perfect, easy flagpole mount.
Did not get the flag pole holder. The receiver clamp arrived on time.
It was to be sent to. Both were ordered in the same transaction.
Jenny N.
2/15/2022
I will have our customer service team reach out to you.
After receiving this I was able to mount it to front area of my camper. Now I will be able to fly our flag proudly, and properly.
Thank you
Fair price for a good product.
Well constructed... quality product and company.... quick shipping....
Very well made
As usual great service.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Victoria B.
1/15/2020
The manufacturer does not include a pin and clip with this product. This allows you to use whichever style pin and clip you would like. A standard pin and clip like part # PC3 is an option, but you could also use a locking hitch pin like part # e98880 to make sure nobody takes your Hitch Mounted Flag Pole.
Helpful Links
Hitch-Locks/etrailer/e98880.html
Hitch-Pins-and-Clips/Draw~Tite/PC3.html