Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Heavy-duty winch with 6-hp, series-wound motor lets you quickly and safely recover a stuck vehicle. Includes 85' wire rope and roller fairlead, free-spooling clutch, and wireless remote with 82' range. Power unit can be remotely mounted.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody. Andy here with etrailer.com. Let's take a look together at this Bulldog Winch Standard Series off-road wire rope winch. Now, this Standard Series recovery winch is going to let you pull your stuck vehicle out of the mud, the snow, water, or ditch and up steep inclines. This is gonna be perfect to use with your work trucks, jeeps, and other off-road vehicles. The rated line pull with a single layer of wire rope around the drum is 12,000 pounds static load and the vehicle recovery capacity is 8,000 pounds.
Now, this six horsepower series wound motor is going to give you powerful, fast and safe line pulling. The motor is more powerful, more efficient, and produces more torque than a permanent magnet motor. And the duty cycle for this is two minutes on and 15 minutes off. And the line pull at zero pounds has a line speed of 26.2 feet per minute, and the line pull at 12,000 pounds has a line speed of 4.6 feet per minute. This has an automatic mechanical brake that's going to hold 100% of the load while minimizing winch creep.
And the power unit here includes the contactor, the plastic housing, and all of the electrical wiring. A wiring kit is sold separately that will let you remotely mount the power unit if you want to do that. The sealed 450 amp contactor transmits power to your vehicle's battery, from your vehicle's battery rather, to this winch motor. And it is water and weather-resistant to IP67 specifications. Now, this does feature a rubber wireless or wired remote that you see right here.
It's handheld and it's gonna fit real nicely in your hand. This does have a 12 foot-long lead that's going to let you operate this winch from a safe distance. And as you can see, we do have weather-resistant switches here that are going to let you use this in virtually any type of weather conditions. The switch is going to allow you to power the load in and out and then you can switch this to the wireless feature if you would prefer to do that. And if you use this in the wireless mode, that's going to let you operate this winch from up to 82 feet away.
If you decide to go and use the wired option on the remote, I just wanted to show you where that lead is gonna plug into. So you'll plug the round end of the cable right there, and then you'll plug in this more rectangular part of the cable right into the bottom of the remote just like that. So it'd be very easy to use and it's nice that the remote has the option either to go wired or wireless. Now, this has an all-steel three-stage planetary gear train with a gear ratio of 265 to one, and that's going to provide increased drum speed and torque when compared with worm drives and one or two-stage planetary gear trains. Let me give you an overhead view real quick. And I just wanted to show you here that this does have a free-spooling clutch that's going to ensure fast rope payout and it's also going to reduce wear on the motor. And the gearbox can be rotated 360 degrees, so you can reach the clutch handle no matter where you mount this winch. Now, the three-eighths of an inch in diameter zinc-plated aircraft-grade galvanized steel wire rope is gonna be very strong and abrasion-resistant. It's 85 feet long and at the end here, will be this hook here. This is a three-eighths of an inch steel hook. As you can see, it does have a keeper and then this nylon hand saber strap. So that is all included. And the drum dimensions is two and a half inches in diameter and eight and 13-16th inches long. And this steel roller fairlead with the thick frame has these four rollers. It's going to reduce friction and wear on the rope. And the fairlead has a clear anodized finish, which is going to do a great job of resisting corrosion. The durable black powder-coated steel body and motor is going to do a great job of resisting corrosion and the Dacromet-plated motor tube is going to resist internal corrosion. So the motor is 12 volt DC and the battery lead length is six feet long. And just some overall dimensions of this winch, so you have a good idea of its size. Looking at the overall length from end to end, we're sitting pretty close to about 21 and a half inches long. The overall width of the winch itself about six and five-16th inches wide. And then the overall height from top to bottom, about 10 and five-eighth inches tall. This is a four bolt mounting pattern that measures 10 inches by four and a half inches. And if you're wondering about the total weight with the wire rope installed, we're sitting about 85 inches or so. Well, I think that's gonna wrap up our look today. I do hope that our overview was helpful for you. Again, my name is Andy, thank you for joining me.
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
Ratings & Reviews

James D.
5/20/2018
I bottomed out twice the last day of deer season. the winch got me out both times. could not get any better than that. best winch I ever owned!

Bob B.
7/27/2023
excellent, minimum use so far, but worth the money
Do you have a question about this Electric Winch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.




Csfarm
9/30/2022
Picked up a Curt31010 wench plate for Bulldog wench. Wench has performed great pulling hard to get to timber off logging trails for over a year. etrailer customer service is first rate.