See what our Experts say about this CURT Lunette Ring

• Parts Needed for Home Builit Triple Axle Flat Bed Trailer
  Thanks for all of the info on the parts you're looking for. From those specs I recommend the following for you: Wheel and Tire combo # AM34834 Buyer's Products Square Jack # 3370091415H Curt Lunette Ring # C48560 Electric Drum Brakes for 7,000 pound Axles # AKEBRK-7-SA
  view full answer...
• Looking For Pintle Hook And Lunette Ring For Trailer
  Hello Ferrell, thanks for getting in touch. It sounds like you are looking for a Pintle Hook and Lunette Ring for a trailer. I was not able to find any references for the part numbers you provided, but we do have a pintle hook and ring that may work for you. Take a look at the following parts and let me know if this is close to what you are looking for: - Curt Pintle Hook - Bolt On - 60,000 lbs # C48231 - Curt Lunette Ring - Flat Plate Mount - 3" Diameter - 60,000 lbs # C48560 If this...
  view full answer...
• Will The Brophy Pintle Hook BR27FR Work With A Lunette Ring With 2-1/4" ID?
  Hello Jason, thanks for reaching out. The Brophy Pintle Hook # BR27FR you mentioned requires a lunette ring with a minimum inner diameter of 2-1/2". If your ring is only 2-1/4" ID it will not work with the # BR27FR. I am afraid we do not have anything comparable that will work with the smaller lunette rings. The next step here would be to look at swapping out your lunette ring for something more standard. For example the Cure Lunette Ring # C48560 which is a bolt on installation and...
  view full answer...
• Available Sizes of Lunette Ring Trailer Couplers
  Lunette rings do come in more than one size. The linked page displays both 2-1/2-inch and 3-inch inner diameter. . Lunette ring accessory items are also shown on the other linked page. Weight capacities for lunette rings are substantial, ranging from 12K up to 60K.
  view full answer...
• Curt # C48560 vs Buyers Products # 337BDB1394 Lunette Ring Comparison
  The Buyers Products Lunette Ring # 337BDB1394 has a gross towing weight capacity of 90,000 lbs and a tongue weight capacity of 15,000 lbs. The Curt Lunette Ring # C48560 has a gross towing weight capacity of 60,000 lbs, but it is not rated for a specific tongue weight. If higher towing weight is your greatest concern, go with the Buyers Products version. Otherwise, look, function, and installation is essentially the same. You can also check out the videos linked below for more details...
  view full answer...
• Off-Road Hitch And Coupler Options For a Toy Hauler RV Travel Trailer
  To connect your toy hauler RV travel trailer you with the Curt Lunette Ring # C48560 you will need to have a Trailer Nose Plate # 337TNP716625750 welded and gusseted in place of your current ball coupler. An easier option would be having a Demco 50-Degree A-Frame Coupler # DM15349-52 welded in place of your coupler. This coupler is rated for up to 14,000lbs and will require drilling for a A-Frame jack if your trailer requires that. Then you will be able to use the Lunette Ring # T1613700...
  view full answer...
• Hardware Kit for the Curt Lunette Ring - Flat Plate Mount
  To mount the Curt Lunette Ring - Flat Plate Mount - 3" Diameter - 60,000 lbs, part # C48560, you can use the Lunette Ring Hardware Kit - Flush Mount, part # C48KR. It includes four 3/4" hex bolts, four nylock nuts and four flat washers. I've linked to a video review of the lunette ring for your reference.
  view full answer...
• Lunette Ring for 23,000 lb Trailer and Boat
  There aren't any lunette rings that have a bolt pattern which measures 5" horizontally by 8" vertically so the best we can offer is a new lunette ring and mounting plate you would have to weld on. You can choose from either a 2-1/2" or 3" lunette ring, depending on what you need. - 2-1/2" Diameter: Curt Lunette Ring - Flat Plate Mount # C48550 - 3" Diameter: Curt Lunette Ring - Flat Plate Mount # C48560 - Mounting Plate: Buyers Products Mounting Plate for Lunette Ring # 337TNP716750100 I...
  view full answer...
• Will Curt Lunette Ring C48560 Fit TorkLift Magnum Pintle Hook Mounting Plate # TLM9002
  I do have a great option for you, however the Curt Lunette Ring # C48560 that you referenced will not work with the TorkLift Magnum Pintle Hook Mounting Plate Adapter # TLM9002. I went out to our warehouse and measured a bolt pattern on the Magnum Mounting Plate of 3-3/8" horizontally (center to center) and 1-1/2" vertically (center to center). The Curt Lunette Ring features bolt hole spacing of 4-1/2", both horizontally and vertically. The Magnum Pintle Hook Mounting Plate # TLM9002...
  view full answer...
• Dimensions of the Curt Lunette Ring # C48560
  Curt lunette ring # C48560 has 4 bolt holes that are spaced 4-1/2 inches apart on center left to right and top to bottom. The base is 6-1/4 inches by 6-1/4 inches. The opening in the ring is 3 inches in diameter. The mounting holes are 1/2 inch in diameter. For installation I recommend 3/4 inch grade 8 bolts obtained locally. Bolts are not included with the ring.
  view full answer...
• Recommended Lunette Ring Rated for 30,000 lbs Weight Capacity
  The Curt Lunette Ring # C48510 is rated for 25,000 lbs weight capacity. It is not rated to stand up to 30,000 lbs so it could fail. To handle that capacity without deformation or issue, I recommend the Curt Lunette Ring - Stud Mount - 3" Diameter - 45,000 lbs # C48530 or the Curt Lunette Ring - Flat Plate Mount - 3" Diameter - 60,000 lbs # C48560.
  view full answer...
• Tongue Weight Capacity of Curt Lunette Ring # C48560
  The Curt Lunette Ring # C48560 has a tongue weight limit of 6,000 lbs and a total trailer weight of 60,000 lbs.
  view full answer...
• Recommended 60,000 lb Lunette Ring With 4 Bolt Pattern
  I have just what you are looking for. The Curt Lunette Ring - Flat Plate Mount - 3" Diameter - 60,000 lbs # C48560. This lunette ring has a mounting plate 6-1/4 inches by 6-1/4 inches and bolt hole spacing 4-1/2 inches apart.
  view full answer...

Do you have a question about this Lunette Ring?