Dexter Light Box Guard for 6" Oval and 2" Round Lights - Steel - Weld or Bolt On

Video Transcript for Review of Dexter Steel Light Box Guard 6 Inch Oval 2 Inch Round Light - DX99VC

Hi, everybody, Andy here with etrailer. Let's take a quick look at this Dexter Steel Light Box Guard for your 6-inch oval and 2-inch round lights. Now, this is a protective light guard for your trailer that's going to help keep your lights from getting damaged. It is made of steel, so it's going to add a solid layer of protection against things like road debris or accidental bumps that could otherwise crack or break your lights. So, this is designed to fit some of the most common trailer light sizes, specifically the 6-inch oval stop, turn, taillights, and the 2-inch round marker light, so there's a good chance this is going to work with what you already have. One nice thing is this is pretty flexible to install.

You can either weld this on for a more permanent setup or you can bolt it on if you prefer something easier to remove or adjust. And they also thought about the wiring here, which can be a pain. There's a side access hole so you can run your wires through without fighting the guard or having to modify it yourself. So, this comes in raw steel so you can prep and paint it to match your trailer. That also is obviously gonna help protect it from rust at the same time.

Giving you some measurements here. The overall, let's call this length, about 8 5/8 inches or so. The width, about 3 3/4. And the height, right at four inches. This is going to be able to work either on the left or right-hand side.

It's universal that way. But if you happen to have any other questions, don't hesitate to reach out. We do wanna make sure that you're getting exactly what you need. Well, again, my name's Andy, thank you for joining me.