We'll connect you with nearby partnered installers who know this exact setup.

Adarac

Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum - Silver - 500 lbs

Part Number: A64RR

54 Reviews | 6 Questions

In Stock

$611.10

Retail:$679.00

You Save: $67.90

Confirmed to Fit

2020 Ford Ranger

5 Foot Bed

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

adarac ladder racks truck bed over the pro series custom rack - aluminum silver 500 lbs

adarac ladder racks fixed rack over the bed a64rr

Show All (2) Product Images

Show Fewer Product Images

In Use/Installed

0 ladder racks adarac truck bed fixed rack pro series custom - aluminum silver 500 lbs

0 ladder racks adarac fixed rack over the bed a64rr

0 ladder racks adarac truck bed over the in use

0 ladder racks adarac truck bed fixed rack in use

0 ladder racks adarac over-cab height over the bed a64rr

0 ladder racks adarac truck bed over-cab height pro series custom rack - aluminum silver 500 lbs

0 ladder racks adarac truck bed over-cab height a64rr

0 ladder racks adarac fixed rack over-cab height in use

0 ladder racks adarac truck bed over the pro series custom rack - aluminum silver 500 lbs

Show All (10) In Use/Installed

Show Fewer In Use/Installed

Videos

Breaking Down the Adarac Pro Series Custom Truck Bed Ladder Rack

Show All (1) Videos

Show Fewer Videos

We'll connect you with nearby partnered installers who know this exact setup.

SCHEDULE AN INSTALLATION

Call etrailer at 1-800-940-8924 for expert service. We are your Ford ladder racks experts, and offer a great price. etrailer carries a complete line of Adarac products for your Ford Ranger 2020. Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum - Silver - 500 lbs part A64RR from Adarac can be ordered online at etrailer.com. Complete ladder racks installation instructions and technical support.

All Info
Reviews (54)
Q & A (0)
Related Parts
Photos

2020 Ford Ranger - Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum - Silver - 500 lbs

Highlights

Designed to Fit Your 2020 Ford Ranger: Installs with hardware that attaches to your truck's bed rails or stake pockets
Secure Heavy Loads: 500-lb capacity (250 lb per bar) handles ladders, lumber, or kayaks.
Tonneau Compatible: Works with most inside-the-rail covers for full bed access.
Adjustable Uprights: Slide along the utility rails to match different load sizes.
Simple No-Drill Setup: Foam-padded rails mount using included stake-pocket inserts.
Durable Aluminum Build: Rustproof anodized finish stands up to weather and heavy use.

Features to know about

Haul More Without Losing Bed Space: Carries Up to 500 lbs

The Adarac Pro Series Custom Truck Bed Ladder Rack gives you 500 lbs of hauling power (250 lbs per bar) without giving up your tonneau cover. You can carry ladders, lumber, or pipes for work and switch to kayaks, canoes, or surfboards when it’s time for the weekend. The crossbars sit above the cab, so long loads ride level and your truck bed stays open for gear or tools.

Adarac Pro Series aluminum ladder rack installed on a pickup truck in front of a house, showcasing elevated cargo capability and sleek, durable design.

Versatile Mounting System: Utility Rails and Slotted Crossbars

Square 66" crossbars with integrated channels on the top and bottom make it easy to secure gear or mount accessories. The rubber strip on the top of each bar helps keep cargo from slipping and can be removed when you need direct access to the top channels. The utility rails also have their own mounting channels for tie-downs or add-ons, giving you plenty of ways to keep loads stable.

Close-up of Adarac Pro Series truck bed rack utility rails and slotted crossbars with integrated mounting channels for cargo accessories.

Adaptable Setup: Sliding Uprights for Different Load Sizes

The uprights can slide forward or backward along the utility rails to fit whatever you’re hauling. They can also be removed completely when you need more open space. This flexibility helps whether you’re loading long materials or bulky recreational gear.

Quick, No-Drill Install: Stake Pocket Mounting

Installation is simple. The foam-padded utility rails bolt into the stake pockets using the included aluminum inserts, so there’s no drilling or cutting. The padding under the rails protects your truck’s finish while keeping the rack stable once it’s mounted.

Built to Last: Lightweight, Rustproof Aluminum

Made from extruded, anodized aluminum, the rack resists rust and corrosion while staying lightweight. The silver finish adds toughness and helps handle year-round use. With its streamlined, angled uprights and over-cab design, the Adarac Pro Series stays strong and steady while keeping your view clear and your setup clean.

Side rear view of Adarac Pro Series streamlined aluminum ladder rack with angled uprights and elevated crossbars above truck cab.

Specs

Weight and Capacity

Carrying capacity: 500 lbs (250 lbs per bar)

Dimensions

Crossbar dimensions: 66" long x 1-1/2" wide

Warranty

Limited warranty: 1-year

Close-up of Adarac Pro Series ladder rack installation showing aluminum stake pocket inserts and foam-padded utility rails for no-drill mounting.

F2010081 ACI Adarac Pro Series Custom Truck Bed Rack - Aluminum - 500 lbs

Installation Details A64RR Installation instructions

4.7

54 reviews

5 Stars		(41)
4 Stars		(12)
3 Stars		(1)
2 Stars		(0)
1 Star		(0)

by: Patrick 11/01/2025

2022 Ford F-150

Overall good product, works with my trifold tonneau cover, I do wish it had some sort of cover for the stake pocket where the upright bolts in. I wish I came with additional channel nuts as well for bolting onto the crossbars

Click to Enlarge

by: Marc 05/10/2024

2023 Ford F-150

I have had the rack installed for about six weeks. After a few trips on everything from highways to gravel and dirt roads it has been very solid. We have a fly fishing rod case mounted on it and it's solid. I think there is a little wind noise but not much. Easy to install, lots of good paper instructions as well as videos on line. Next trip will have our canoe mounted on top.

Click to Enlarge

Marc One Year Later

5/11/2025

The rack works great. We’ve had the canoe on it. It’s solid. It has not needed any adjustments. The paint is holding up just fine. We’ve removed and reinstalled it twice with no problems. Very glad we got this one

by: Rob 07/01/2025

2022 Jeep Gladiator

I bought this rack believing installation did not require drilling. That may be true for installation on many vehicles, but does require drilling to install on a Jeep Gladiator. Special instructions that come with the rack are quite clear on this for both a Jeep Gladiator and a Toyota Tacoma up to 2023.

A 2nd issue came up while following the instructions. They call for torquing the self threading bold to 85 in/lbs. When I hit 60 in/lbs, the self threading bolts started stripping out the holes. I fixed this using 6 nuts to hold the self threading bolts from underneath. Tight clearances made this a tougher job than it should have been.

To anticipate questions, yes I was using a torque wrench calibrated in inch pounds and not foot pounds. Yes I used the proper drill size and did not wobble the holes larger. I believe that at least for Jeep Gladiator, the kit should include nuts for the hold down bolts. Can't comment on the Toyota Tacoma - but be prepared.

I will say that once installed, the rack looks to be a quality item and I am otherwise satisfied with it. If not for the unexpected installation hassles, I would rate the rack as 5 stars.

Click to Enlarge

by: Michael 09/25/2026

Adarac pro was as advertised and assembly went well. Looks good on the truck. Delivery was ahead of schedule.
Always good doing business with etrailer

by: Gary 04/20/2022

I had delayed trying to get ladder racks because I wasn't sure whether it would work with my bed cover. I was able to locate the correct model online and verify my findings and order on the phone Rodney was helpful and friendly.

Click to Enlarge

Gary W. One Year Later

4/21/2023

Great. The rack looks good and is very stable

by: Ken 08/24/2020

2020 Ford F-150

Packaged delivered in good shape. The rack was very well made. It was easy to install. Very sturdy and should hold up well. The Pro model worked with my Bak-flip Tonneau Cover. I would highly recommend this product. I have used etrailer for years and they always come thru.

Click to Enlarge

Kenneth S. One Year Later

8/20/2021

It works great with my bakflip hard cover

by: Tran 06/22/2021

I love my Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum - Matte Black - 500 lbs. I found it easy to install by myself—including cutting the deck plastic trim to expose my stake covers. Its black finish complements my truck. Best of all, it enables my BAK Industries tonneau cover, Revolver X2, to maintain is full functionality. My only recommendation would be to include more foam strips. They are intended to fill the gaps between the end of the grooves on the plastic trim to the end of the rail. There was enough for one strip of foam on each end rather than two (one on each side of the rail) on each end of the rails.

Click to Enlarge

by: Russell 08/27/2026

Looks like the rack will work out good for hauling canoes and kayaks and such. Appears well made, and installed pretty easily.

by: Richard 04/13/2021

2020 Jeep Gladiator

Took a couple of hours to install. One on the few you can use with hard tri-fold bed cover. Going to add side bars for off-road tools.

Click to Enlarge

by: Oleg 10/14/2022 One Year Later

I have had this rack for one year. So far, so good. It looks great, way better than other models I see around. Do not rust; sturdy enough. Works well with trunk cover. Installation is a bit tricky, but any handyman can do it alone in a couple of hours. Good purchase overall

Click to Enlarge

by: Matt 06/18/2025

2025 Ford Ranger

After 90 minute install, it feels sturdy and looks great. Ford ranger 2025, no cutting or drilling required. I like the fact that it has some rubber strips on top, should work well for carrying a kayak. Will need to unscrew antenna if carrying something in middle over roof.

Gwendolyn Y.

6/20/2025

Happy to hear that you love the rack, Matt! When do you get to use it to carry your kayaks to the water?

by: Jose A 03/10/2025

2022 Jeep Gladiator

Clean, sleek look. Easy to install!

Click to Enlarge

Gwendolyn Y.

3/11/2025

Looks great on your Gladiator, Jose! What are you going to put on the rack?

by: Mark 06/25/2025 One Year Later

The ladder rack is great. Fits over my tonneau cover. And carries everything I put up there.

by: F 04/17/2022

2021 Ford F-150

Great rack, works with tri-fold cover.

Click to Enlarge

by: Donald P. 11/24/2025

Package arrived on time I have been out of town for a few weeks so just put it together today
It fit perfectly I think it looks good will mount kayaks on it and see if it works
I am well pleased so far

by: Sergio 09/07/2022 One Year Later

I really like the aesthetics of the ladder rack and functionality. Its sturdy, durable and looks slick !

Click to Enlarge

by: John t 04/14/2019 One Year Later

Works great with the backflip hard cover.
Should have some predrilled hole to attach tie down straps.

Jack T. One Year Later

4/15/2020

Great

by: Lawrence 07/16/2021 One Year Later

Ford F-150

I bought this ladder rack because I needed something that would attach to the stake pockets of my f-150 because I have a bed cover. Everything else I found had to hook around the side of the truck bed. Installation was easy. The only issue I had was the forward stake holes didn't have a removable cover. I had to cut a hole in each side.I use them to carry my kayaks when I go camping. They work great for that and carrying anything that won't fit in the bed.

by: andrew 06/24/2021

Got it.
Looks great!

Click to Enlarge

by: William 04/21/2023 One Year Later

Love this ladder rack...it works great with my tauneau cover, Iuse it to transport our Kayaks when we go camping and it is great to still be able to use my bed with the tauneau cover on to protect our gear in inclimate weather. I would absolutely buy it again. Thanks.

by: Maksym k 06/12/2021

2020 Ram 1500

Good quality.

Click to Enlarge

by: Myron 02/12/2021 One Year Later

This rack is very solid and travels well.
I have had no problems but I should say I have used it lightly.

Myron One Year Later

2/13/2022

I have traveled with kayaks at highway speeds from Wisconsin to Texasthree times with two kayaks and have no problems.

by: Paul 01/12/2021

2020 Chevrolet Silverado 2500

Box came open at one end and slightly open at the other. I was nervous thinking that the hardware bag and two additional accessories that I ordered might be missing. Upon opening the box everything was there and well packaged. The only issue I had was one of the vertical supports that has two laser cut holes didn't have one of the holes completely cut. 3/4 of the cut was made. I punched a starter hole in the center and drilled it out and finished the install. Overall great rack for carting around the canoe or lumber longer than the pickup bed. One other thing. They need to debur the edges of the aluminum pieces otherwise they are very sharp.

by: Aaron 09/07/2022 One Year Later

I think it's a great ladder rack for step ladders and shorter extension ladders. I qwould support anything longer than a 16 footer. It was easy to put together and works really well for what I need and with my tonneau coover

by: Jim 08/20/2022 One Year Later

Easy to install, very stout, light weight, looks great and the tie down points on the ends of the racks are a great feature. Nothing to not like ... well maybe the price lol.

Jim One Year Later

8/21/2023

Im sorry, its not good.Dry rotted rubber hinges cracking, seals falling out, parts falling off,some coming loose. FYI:my pickup is kept in pristine condition, no off road always garaged... etc.

true

Show More Reviews

See what our Experts say about this Adarac Ladder Racks

Do you have a question about this Ladder Rack?

Recommended Ladder Rack for a 2019 Ford Ranger w/ a Tri-Fold Tonneau Cover 5' Bed
Hey Scott. I only have two options that may work with the tri-fold tonneau cover on your 2019 Ford Ranger. If your stake pockets aren't covered you can use the Adarac Pro Series Custom Truck Bed Ladder Rack item # A36ZR in matte black or item # A64RR in silver. The Adarac Ladder Racks have vertical uprights so they won't block your tonneau cover as it folds open. They install using the stake pockets at the top of your bed rails. Each one has a 500 lbs capacity. What tri-fold tonneau...
view full answer...
Ladder Rack that Fits 2022 Ford Ranger with BAKFlip MX4 Tonneau
Hey Edgardo, so the only ladder rack that can fit with your BAKflip MX4 tonneau cover on your 2022 Ford Ranger and allow the tonneau cover to open while installed is an Adarac Pro Series like the part # A96ZR for if you have a 6 foot bed or the part # A64RR if you have a 5 foot bed. This is only option that installs to top of bed rails which allows the tonneau cover to be installed at same time and has vertical uprights which allows the cover to fold as well.
view full answer...
Recommended Tonneau Cover And Ladder Rack Combo For A 2023 Ford Ranger
When installing a tonneau cover on your 2023 Ford Ranger I recommend the BAKFlip F1 Hard Tonneau Cover - Folding # BAK772332. This tonneau cover mounts insdie the bed rails and is compatible with ladder racks that mount on top of the bed rails. I like this tonneau cover over the others that we offer because it has a tri-fold design that allows for partial or full truck bed access in seconds without having to remove the cover. The ladder rack that I recommend that will work best with the...
view full answer...
Tonneau Cover And Ladder Rack Combo Options For 2020 Ford Ranger With 5 Foot Bed
I have a solution for you, but the Lomax Hard Tonneau Cover # A95FR mounts on top of the bed rails and will interfere with any ladder rack. The tonneau cover that I recommend going with is the BAKFlip F1 Hard Tonneau Cover - Folding # BAK772332. This mounts inside the bed rails and is compatible with ladder racks that mount on top of the bed rails. The best ladder rack for your application is the Adarac Pro Series Custom Truck Bed Ladder Rack which comes in Silver # A64RR or Black # A36ZR....
view full answer...
What Hard Roll-Up Tonneau Cover and Ladder Rack do You Recommend for My 2022 Ford Ranger?
For a great hard roll-up tonneau cover that will allow you to use a ladder rack and fits the 5-foot bed on your 2022 Ford Ranger, I recommend the BAK Revolver X2 Hard Tonneau Cover - Roll Up # BAK39332. The Revolver X2 is a ultra-flush, low-profile cover that sits inside your truck bed rails and has no visible hinges. It also involves a no-drill installation and simply clamps on the inside of your bed's side rails. As far as the ladder rack, I recommend the Adarac Pro Series Custom Truck...
view full answer...
Are the Uprights on the Adarac Pro Series # A64RR Adjustable?
Yes, the ladder bases on the Adarac Pro Series Custom Truck Bed Ladder Rack # A64RR have a sliding capability.
view full answer...

Do you have a question about this Ladder Rack?

Info for this part was:

Edited by:

Lindsey S

Video Edited:

Jacob T

Video by:

Chris R

Updated by:

Wilson B

Updated by:

Alex H

Written by:

Mark S

Installed by:

Adam E

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.