Is the # 36416 Hitch Picture an Accurate Picture or a Typical Photo for 2010 Toyota Camry SE

Updated 05/10/2010 | Published 05/08/2010

Products Featured in This Question

1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs

(2634)

$17.00

Rubber Tube Cover 1-1/4"

(312)

$8.86

Drawbar for 1-1/4" Hitch - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3.5K

(2337)

$30.45

etrailer Trailer Hitch Receiver Lock for 1-1/4" Hitches - Flush - 2-1/8" Span - Chrome

(3690)

$36.46

Pin and Clip for 1-1/4" Hitches - 1/2" Diameter

(896)

$11.38

Question:

I want to put the Draw Tite Trailer Hitch PN 36416 on my 2010 Toyota Camry SE, but Im a bit confused because the picture on your website and the picture on the manufacturers website dont appear to be the same item. Any help?

asked by: chris

Expert Reply:

The pictures on our site are of the actual Draw-Tite Trailer Hitch, item # 36416 and the installation video is an actual installation we did on a 2010 Toyota Camry. Our site uses actual pictures for all of the items we carry unless otherwise stated as a typical photo.

I went to the Draw-Tite site and saw that they are using a typical photo for this part number but if you pull up the installation instructions (see link) you will see that the drawing for the # 36416 hitch is the same as our actual photo.

Some items you may need to complete your towing setup are listed below.

Drawbar, item # 36071
Tow Ready Ball 2 inch, Item # 19258
Tow Ready Ball 1-7/8 inch, Item # 19256
Pin and Clip, item # PC2
Trailer Hitch Receiver Lock, item # e98879
Rubber Tube Cover 1-1/4 inch, item # 2211