Video Transcript for Breaking Down the VFW Seal Trailer Hitch Receiver Cover

Today, we're going to be taking a look at the VFW seal 2-inch hitch cover from AMG. This hitch cover's going to allow you to display the officially-licensed VFW seal, and it's going to add a clean, finished look to your vehicle, and it's going to help keep dirt and grime out of the receiver tube of your hitch. The hitch cover's going to be made from a steel construction. It's going to feature a black powder-coat finish on it, so it's going to do great at resisting rust and corrosion. We're going to have the chrome-plated metal emblem right here on the front. That's going to feature a rust-proof and fade-proof design. It's American-made. Here on the back side, we're going to have a foam gasket.

That's going to help reduce rattling between the hitch and the hitch cover. The hitch cover is going to require a hitch pin and clip or a hitch lock for installation into your hitch. Those items are sold separately, but if you're interested in one, you can find them right here at etrailer.com. The pin hole on this hitch cover will accept a standard 5/8-inch diameter pin. A few measurements to go over with you real quick. The overall width here at the face is going to be about 5 inches.

Overall height, it's going to be about 3-1/2 inches tall. If we take a measurement from the back of that foam pad to the center of the hitch pin hole, we're looking at about 2-1/2 inches. Again, this is designed for a 2-inch by 2-inch trailer hitch. A very simple installation process. All you have to do is slide it into the receiver tube of your hitch, line up your pin holes, and then secure it with a hitch pin and clip or a hitch lock.

That's going to do it for today's look at the VFW seal 2-inch hitch cover from AMG.