Product Experts Available Now!
Call 1-800-940-8924
THIS ITEM IS NOT A FIT FOR
1994 Pontiac Firefly
We'll connect you with nearby partnered installers who know this exact setup.
EcoHitch Stealth Trailer Hitch Receiver - Custom Fit - 2"
Part Number: 306-X7370
In Stock
$492.99
1994 Pontiac Firefly
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (9)
- Q & A (0)
- Photos
EcoHitch Trailer Hitch - 306-X7370
Highlights
- Custom Fit for Your Vehicle: Mounts to existing attachment points
- Keep Your Vehicle’s Factory Look: Hidden cross tube mounts behind your rear bumper - only the receiver is visible.
- Remove When Not in Use: Receiver unbolts easily for a completely hidden appearance.
- Tows up to 3,500 lbs (GTW): Handles small trailers, boats, or utility loads securely.
- Holds up to 525 lbs (TW): Works with bike racks, cargo carriers, and other Class III gear.
- Eco-Friendly Alloy Construction: Durable aluminum, steel, and stainless mix made from recycled materials.
Features to know about
Clean Look Without the Bulk: Completely Hidden Hitch Design
You don’t have to give up your vehicle’s sleek style to add towing capability. This hitch mounts behind the rear bumper so the cross tube stays completely out of sight. Only the 2" receiver is visible when you need it, and you can unbolt and remove the receiver when you’re done towing to get a clean, factory look again.
Strong Enough for Everyday Use: 3,500 lbs GTW and 525 lbs TW
For hauling small trailers, bike racks, or cargo carriers, this hitch is ready to go. It’s rated for a maximum gross trailer weight of 3,500 lbs and a maximum tongue weight of 525 lbs. The sturdy, lightweight aluminum and steel alloy construction gives you solid strength without extra bulk. It meets SAE J684 towing safety standards so you can tow or carry gear with confidence.
Built Tough and Environmentally Friendly: Recycled Alloy Construction
This hitch uses a mix of aluminum, steel, and stainless steel made from recycled materials. The combination keeps it strong while helping reduce the impact of traditional steel manufacturing. A black powder coat finish adds rust protection and keeps the hitch looking good through years of use on the road.
Easy Install for DIY Projects: Bolt-On Design with No Drilling
You can install this hitch in your driveway using regular tools. The design bolts directly to the frame behind the bumper—no drilling or welding needed. It’s built to line up where it should, making it a great project for anyone who wants to add utility without professional help.
Specs
Receiver Opening
- Size: 2" x 2"
Weight and Capacity
- Maximum gross trailer weight: 3,500 lbs
- Maximum tongue weight: 525 lbs
Compatibility
- Weight distribution systems: Not rated
Warranty
- Limited lifetime warranty:
X7370 Tork Lift Central Eco Hitch Stealth Trailer Hitch - 2" Receiver
This Product Fits The Following Vehicles
- 2017 - 2019 Audi A4
- 2017 - 2019 Audi A4 Allroad
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
Ratings & Reviews
3.8
9 reviews
by:
Ben and Cassie
04/05/2022
2017
Audi
A4 Allroad
Overall a good hitch. Very beefy and holes lined up well. A few things that other buyers might want to know below:
-Packaging could have been better. The hitch is so heavy that it had tears through three sides of the box by the time it arrived.
-The receiver has a tiny amount of wiggle even with the bolt torqued to 112ft lbs. It is also ever so slightly off center axis. I suspect that a stealth hitch wouldn’t have these issues.
-Install took me about 1.5 hrs but I work on cars a lot.
-There are a couple of errors both in the written instructions and the video by etrailer. First and most importantly, the etrailer installer measures from the wrong line on the bumper cover for his cuts. You are supposed to measure two inches back from the bottom kick sensor ridge inside the bumper. He measures forward two inches from the lowest outside visible ridge which is incorrect. His cut results in the hitch being much more visible than it needs to be. You can see in my photos that if you follow the cut directions in the written instructions that it is much more hidden. The receiver also slides in right in the center of the hole. I put some edge trim around the cut which makes it look much better and protects your knuckles when removing and installing the receiver.
-Second, both the written and video instructions don’t give enough info on the dowel pins below the taillights. There is a flap within the bracket on the body that needs to be folded out of the way after removal of the pin and back into position after bumper reinstall. Since I did not know this, the flap on one of mine broke off. I was able to position it back and slide the dowel pin through after bumper reinstall. Bottom line: after you pull the pin: look down in there with a flashlight and fold the flap towards the center of the car so the bumper tabs can come out.
Hope this helps others.
-Packaging could have been better. The hitch is so heavy that it had tears through three sides of the box by the time it arrived.
-The receiver has a tiny amount of wiggle even with the bolt torqued to 112ft lbs. It is also ever so slightly off center axis. I suspect that a stealth hitch wouldn’t have these issues.
-Install took me about 1.5 hrs but I work on cars a lot.
-There are a couple of errors both in the written instructions and the video by etrailer. First and most importantly, the etrailer installer measures from the wrong line on the bumper cover for his cuts. You are supposed to measure two inches back from the bottom kick sensor ridge inside the bumper. He measures forward two inches from the lowest outside visible ridge which is incorrect. His cut results in the hitch being much more visible than it needs to be. You can see in my photos that if you follow the cut directions in the written instructions that it is much more hidden. The receiver also slides in right in the center of the hole. I put some edge trim around the cut which makes it look much better and protects your knuckles when removing and installing the receiver.
-Second, both the written and video instructions don’t give enough info on the dowel pins below the taillights. There is a flap within the bracket on the body that needs to be folded out of the way after removal of the pin and back into position after bumper reinstall. Since I did not know this, the flap on one of mine broke off. I was able to position it back and slide the dowel pin through after bumper reinstall. Bottom line: after you pull the pin: look down in there with a flashlight and fold the flap towards the center of the car so the bumper tabs can come out.
Hope this helps others.
by:
Tom
09/05/2020
2018
Audi
A4 Allroad
I needed a 2" hitch to accommodate a bike rack (no wiring needed) and this hitch is exactly what I wanted. I did not do the install myself but had a local body shop do the job and I am very pleased with the result.
by:
Josh
12/20/2025
The hitch itself is great and the instructional video was excellent, Unfortunately, the parts bag was missing a lock nut and bolt, so I had to make a trip to the hardware store half-way through the install.
by:
Lucio
07/11/2025
2018
Audi
A4 Allroad
Everything worked well. The cut out on the bumper on the instructions is off, I had to cut a bit extra.
by:
Brandon
02/13/2023
2018
Audi
A4
I wanted a 2" hitch so my wife and I could use the same bike rack. The price difference between the 1.25" hitches and the 2" is insane. But in the end it was cheaper than buying a second rack and then having to deal with two racks. Install wasn't bad. I can't understand why the hitch part is removable. When the rack is installed it just rocks back and forth making noise. I don't know why anyone would go through the trouble of taking the hitch on and off and now someone can steal the rack with a wrench. There's no way to lock it on now. There were no other options though but wish I'd gone a different route.
by:
Bronwyn
06/16/2021
2021
Audi
A4 Allroad
DOES NOT FIT WHEN YOU PUT THE BUMPER COVER BACK ON
Sierra K.
6/21/2021
Thank you for your review. You have to cut the fascia of the bumper to make it fit. Here is a video of the trimming starting at the 11:52 minute mark.
by:
Jesse
01/19/2022
Hitch works great. The tongue sits almost flush to the rear bumber, almost not noticeable when your not towing.
by:
Joe
11/03/2023
Great product, easy to install
by:
B
01/01/2025
9
9
true
See what our Experts say about this EcoHitch Trailer Hitch
- Looking For A Hitch For My 2018 Audi A4 AllroadHey Jim, The Stealth Hitch Wiring comes with a ball mount specific to the Stealth hitch so I wouldn't recommend mixing them, you'll get a ball mount that has no use for the Eco hitch. I would recommend going with the Eco Hitch # 306-X7370 and the Curt wiring harness # C59236. I say that because the Eco hitch is going to have the same towing capacity as the Stealth hitch, but offer more tongue weight capacity. Both the Stealth Hitch and Curt wiring are going to require splicing so I recommend...
view full answer... - 2 inch Trailer Hitch that Fits 2021 Audi A4 AllroadWe do have 2 inch hitches that fit your 2021 Audi A4 Allroad like with the EcoHitch hitch part # 306-X7370 for a totally hidden and removable setup. When not in use the lower hitch opening can be removed so that it's totally out of sight. Then for trailer wiring that requires zero splicing we have the part # 119250KIT as well.
view full answer... - Hitch Recommendation for 2017 Audi A4 Allroad for Towing 960 lb Travel TrailerIn addition to the Curt # C11448, EcoHitch offers a hitch for your Allroad A4 that has a 2 inch receiver, part # 306-X7370. This hitch has higher ratings, with a towing capacity of 3500 lbs and a 525 lb tongue weight capacity. The advantage to this hitch is that the receiver tube is removable. Once it's removed, the hitch will not be visible at all. This hitch should be able to handle the weight of the small travel trailer you mentioned, but keep in mind that the towing capacity of the...
view full answer... - Can I Lock The EcoHitch Stealth Trailer Hitch Receiver To My 2017 Audi A4 AllroadWhile there is not a lock for your removable hitch receiver, it is incredibly specific. It is useless without the rest of the EcoHitch Stealth Trailer Hitch Receiver - Custom Fit - 2", part # 306-X7370. It also looks like a traditional hitch receiver, so few if any people would think to investigate this hitch receiver further. At a quick glance you cannot tell the hitch receiver is removable. If you wanted to have some more peace of mind, you can always lock the hitch bike rack to the safety...
view full answer... - Can EcoHitch 306-X7370 Installed on 2017 Audi S4 Sedan Carry 250 lb Dirt BikeAs long as the combined weight of the dirt bike and the carrier you're using doesn't exceed the 525 lb tongue weight capacity of the EcoHitch # 306-X7370, the hitch itself will handle carrying your dirt bike just fine. The capacity of the hitch will be limited by the capacity of the vehicle, however. The actual capacity of your vehicle will depend on how its equipped, I saw towing capacities ranging from 3300 lbs for the 1.4L engine models up to 4200 lbs for A4 models with the 2.0L engine....
view full answer... - Can The EcoHitch Stealth 2 Trailer Hitch Be Used With Non-Trailer Loads?The EcoHitch Stealth Trailer Hitch Receiver - Custom Fit - 2" # 306-X7370 is considered Class 1, but it is indeed compatible with a bike rack and it does not require only trailer loads. However, you can also use your current Curt hitch receiver with a different bike rack that fits the 1-1/4" opening. The Curt # C11448 hitch receiver that is confirmed to fit your vehicle has instructions that state the following: All non-trailer loads applied to this product must be supported by stabilizing...
view full answer... - Best Bike Carrier for 2018 Audi A4 Convertible for Electric BikesWe can help you with a bike carrier solution for your 2018 Audi A4 convertible but standard trunk racks are not a good option. Instead you can bolt on a hitch that will allow use of a much sturdier hitch-type rack and even other accessory carriers and avoid all risk of a bike rack damaging the car's painted finish. For your A4 we offer three hitches that bolt on without drilling, using included hardware. These differ in the difficulty of the installation and just how noticeable the hitch...
view full answer...
- Does Stealth Hitch Trailer Wiring for 2017 Audi A4 Allroad Work With Sequential TaillightsThe trailer wiring that comes with the Stealth hitch part # 391AUDA417T works just fine with sequential taillights. Basically the program that makes the taillights sequential is in the light assembly setup whereas the lighting harness wires to the lights that run to the taillights and is before any of that programming.
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Video by:
Dustin K
Video Edited:
Chris R
Updated by:
Wilson B
Written by:
Alexander C
Test Fit:
David F
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina B.
4/29/2022
When it comes to cutting the hole for accessibility inside the bumper, it really depends on your preference for the holes aesthetic. You can see at time stamp 11:39, for the installation video of the 2017 Audi A4 Allroad, that our installer cuts a little higher on the bumper to make it a bit more accessible for the average person to see and maneuver where the receiver tube is going while attaching and removing. If you would like for the hitch to be completely invisible, you can cut a little lower on the bumper or if you like to be able to see a bit more clearly when attaching or removing the receiver, you can move the hole just a .5 inch higher on the bumper.
Helpful Links
tv-install-ecohitch-stealth-trailer-hitch-2017-audi-a4-allroad-306-x7370.aspx