See what our Experts say about this CURT Trailer Hitch

• Recommended Trailer Hitch for 1994 Buick Roadmaster Estate Wagon
  I do have an option for you, however the Draw-Tite Class III Max-Frame Hitch Receiver # 75676 referenced in your question is designed for certain model year Lexus vehicles and will not fit your Buick Roadmaster Wagon. For your vehicle, I instead recommend the Curt # C12009, which is confirmed to fit your 1994 Buick Roadmaster Estate Wagon. This is a Class II hitch with a 1-1/4 inch receiver opening, but it does feature a 3,500 pound towing weight capacity. This is the highest rated hitch...
  view full answer...
• Recommended Equipment for Towing a Trailer with a 1993 Buick Roadmaster
  The only trailer hitch receiver that is available for your 1993 Buick Roadmaster Sedan is the Curt Trailer Hitch Receiver # C12009. It is a Class II hitch with a 1-1/4" receiver as you mentioned. It has a Gross Trailer Weight (GTW) of 3,500 lbs and a Tongue Weight (TW) of 350 lbs. If your Roadmaster and this trailer hitch are rated high enough for your trailer then you will just need Trailer Wiring # HM11141185 and a compatible ball mount and hitch ball. The Curt Towing Starter Kit # C45147...
  view full answer...
• What Trailer Hitch Will Fit The 1985 Chevy Caprice And Can It Be Used To Tow?
  Hello, thanks for getting in touch. There is only one custom fit hitch available for the 1985 Chevy Caprice, the Curt # C12009. This has a 1-1/4" receiver and a 3,500 lb towing capacity. There is no 2" hitch made for this vehicle. Technically this 1-1/4" hitch can be used to tow, as long as the load remains under 3,500 lbs. Looking up the 1980 Chevy Caprice online, it looks like it has a base curb weight of about 3,400 lbs. So the combined weight of the vehicle, plus whatever trailer...
  view full answer...
• Trailer Hitch Options For A 1979 Chevy Caprice Wagon
  Hi Carston, The Curt Trailer Hitch Receiver # C12009 is listed as a fit for sedan models only. It looks like we unfortunately don't have a custom-fit option for a wagon model so you'd have to go with a weld-on option instead. To do this you would need to measure your frame width and see how much of a drop you'd need from the frame to clear the rear fascia. We offer the following weld-on options, which will all fit an 18" to 44" wide frame width and any excess can just be trimmed off of...
  view full answer...
• Availability of Class III Hitch for 1996 Buick Roadmaster Estate Station Wagon
  We do offer a Class II hitch for the 1996 Buick Roadmaster Estate Wagon with a respectable 3500 lb towing/350 lb tongue weight capacity, part # C12009. For towing, you'd also need the trailer wiring harness, part # C55352 and a 1-7/8 inch ball, # 19256 or a 2 inch ball, part # 19258. None of the hitch manufacturers we deal with offer a Class III hitch that would be compatible with the 1996 Roadmaster Estate Wagon.
  view full answer...
• Is There a Class III 2" Trailer Hitch Receiver Available For a 1995 Buick Roadmaster?
  The Curt Trailer Hitch Receiver # C12009 class II receiver is our only custom fit receiver for your 1995 Buick Roadmaster. There are a couple ways you can get to a 2" opening receiver. First would be to use an Adapter # e43YR but this will lower your towing capacity and tongue weight by 50%. Second would be to use a Curt Adjustable Trailer Hitch Receiver # C13701. This may require some customizing on your Buick as it is a universal style receiver. Finally you can take the Receiver #...
  view full answer...
• Is There a Class III Hitch for a 1994 Chevy Caprice
  I do have an option for you but there is only one trailer hitch option for a 1994 Chevrolet Caprice and that's the Curt Trailer Hitch Receiver part # C12009 which is a class II. It however can still be used for towing up to 3,500 lbs but there would be no options for weight distribution. I do understand you want to use a class III hitch and weight distribution system but that won't be an option.
  view full answer...
• Trailer Hitch and Wiring for a 1996 Buick Roadmaster
  We have a class II hitch that will fit your 96 Buick Roadmaster. The Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" Item # C12009. We haven't had the chance to install this hitch on a vehicle, but it is rated for a 50 minute install and has some drilling required. You can see the installation steps in the instructions I have linked. This Class II hitch is the only option for your vehicle so provided that its 3,500 pound capacity as well as the car's capacity are high enough...
  view full answer...
  
• Differences Between Class II and Class III Trailer Hitches
  The biggest difference between a Class II hitch and a Class III is the size of the hitch opening. The Class II will have an opening that is 1-1/4 inch by 1-1/4 inch and lower capacities whereas the Class III will have a 2 inch by 2 inch opening with higher capacities. There aren't always Class III hitches available for every vehicle. For example your 1996 Buick Roadmaster Estate Wagon only has a Class II hitch available, part # C12009. The Class III hitches are generally reserved for...
  view full answer...
• Availability of Curt Trailer Hitch that Fits 1996 Chevy Caprice Classic Sedan
  Hey Dominic, so we have a Class II Curt hitch that fits your 1996 Chevy Caprice sedan with the part # C12009 which is rated for a 3,500 lb trailer. While this is a Class II hitch it has a Class III hitch's towing capacity. The hitch size is 1-1/4 inch.
  view full answer...
• Trailer Hitch Receiver to Fit 1994 Chevrolet Caprice Police Model
  Curt offers Trailer Hitch, # C12009, which was designed for the Caprice Sedan and will work with the police model. This is a Class II hitch with a 1-1/4 inch receiver opening. If you plan on doing any towing, I have included an article that covers the steps to choosing the correct ball mount for your set-up as well as a link to our ball mounts for the 1-1/4 inch hitch. To complete the towing setup, you will just need a hitch ball, # A-80 for 1-7/8 inch or # A-82 for 2 inch, and Pin and...
  view full answer...
• What Hitch do You Recommend for My 1987 Chevy Caprice Sedan?
  While we do have a great hitch option for your 1987 Chevy Caprice, we do not have any Class III hitches that fit. With that being said, your best and only option is to use the Curt Hitch - Class II - 1-1/4" # C12009. Not only does the hitch come with 350 pounds of maximum tongue weight capacity and 3,500 pounds of maximum gross towing weight capacity, it also comes with a higher-quality gloss outer coating that provides more protection against rust and corrosion than any of our other brands....
  view full answer...
• Trailer Hitch Recommendation for a 1994 Buick Roadmaster Estate Wagon
  We have a class II hitch that will fit your 96 Buick Roadmaster, but not a class III. The Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" Item # C12009. We haven't had the chance to install this hitch on a vehicle, but it is rated for a 50 minute install and has some drilling required. You can see the installation steps in the instructions I have linked. This Class II hitch is the only option for your vehicle so provided that its 3,500 pound capacity as well as the car's...
  view full answer...
• How To Order Replacement Trailer Hitch Installation Hardware For 1994 Buick Roadmaster Sedan
  For a 1994 Buick Roadmaster we offer one trailer hitch. It is the Class ll Curt Trailer Hitch, part # C12009. This trailer hitch has a 1-1/4 inch receiver opening. For this hitch a tech note form Curt states that all non-trailer loads - bike racks, cargo carriers and so forth - should be supported with stabilizing straps, like part # 18050. Failure to properly support these loads will void your hitch warranty from Curt. For replacement hardware for a trailer hitch you can type # RHK...
  view full answer...
• Trailer Hitch for a 1979 Buick Estate Wagon
  There is only one trailer hitch that fits the 1979 Buick Estate Wagon. It is # C12009. But this is a Class II hitch with a 1-1/4 inch receiver rated for 350 pounds tongue weight and 3,500 pounds gross trailer weight. There isn't a higher capacity hitch available for this vehicle.
  view full answer...
• Which Trailer Hitch and Wiring Kit Fits 1979 Buick Electra
  For your 1979 Buick Electra the Curt hitch part # C12009 is actually the correct fit and not the one you mentioned as it fits other vehicles that are much different. Then for a trailer wiring kit the Curt part # C59236 is the best option for you. For a ball mount then the part # C45522 is the correct one for the hitch mentioned. For hitch balls you'd want the part # C40018 for a 2 inch ball or part # C40001 for a 1-7/8 inch ball.
  view full answer...
• What is Required to Install Draw-Tite Trailer Hitch # C12009 for the 1996 Buick Roadmaster
  The Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" Item # C12009 for the 1996 Buick Roadmaster installs without need to lower your exhaust but does require some drilling. All required hardware is included. Tools needed for installation include 15mm wrench and socket, 3/4-inch socket, drill with 9/16 bit and a torque wrench. I have linked a helpful article concerning hitch installation tips.
  view full answer...
• How to Tow a Trailer with Brakes with a 1995 Chevrolet Impala SS
  The Curt Trailer Hitch Receiver part # C12009 is a confirmed fit for your 1995 Chevrolet Impala SS and will work well for you. In order to tow a trailer with brakes you will also need to use both the Curt T-Connector Vehicle Wiring Harness part # C55347 and the Universal Installation Kit for Trailer Brake Controllers part # ETBC7. If you need a brake controller I recommend the Curt TriFlex Trailer Brake Controller part # C24VV with the Universal Wiring Adapter part # C51515. The only other...
  view full answer...
• 2 inch Square Receiver Adapter for 1993 Buick Roadmaster
  All of the hitch receivers and receiver accessories that we offer are square, not rectangle. Since the receiver that you mentioned likely doesn't exist anymore, I recommended installing a new hitch so that you can use a variety of accessories. If you have the Sedan the recommend hitch is the Curt Class II # C12009. This trailer also has a Gross Trailer Weight of 3,500 lbs and a Gross Tongue Weight of 350 lbs. If your Roadmaster is an Estate Wagon then it would have taken the Curt C12041...
  view full answer...
• Availability of Trailer Hitch for a 1991 Chevy Caprice
  The hitches we have for your 1991 Chevy Caprice are 1-1/4 inch like the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # C12009. The 2 inch hitches are reserved for larger vehicles like trucks and SUVs that would have higher towing capacities.
  view full answer...

Do you have a question about this Trailer Hitch?