How to Tow a Trailer with Brakes with a 1995 Chevrolet Impala SS
Updated 04/23/2018 | Published 04/20/2018 >
Products Featured in This Question
Question:
I am looking at getting part # c12009 trailer hitch and want to make sure that it is compatible to my 95 SS impala. I have read the reviews, but wanted to make sure of fit. Also, do you have a wiring set up with trailer brake for this hitch. I plan on towing a pop up camper with a weight of about 2300 lbs. Would appreciate any input or information about this application.
asked by: Ray
Expert Reply:
The Curt Trailer Hitch Receiver part # C12009 is a confirmed fit for your 1995 Chevrolet Impala SS and will work well for you. In order to tow a trailer with brakes you will also need to use both the Curt T-Connector Vehicle Wiring Harness part # C55347 and the Universal Installation Kit for Trailer Brake Controllers part # ETBC7. If you need a brake controller I recommend the Curt TriFlex Trailer Brake Controller part # C24VV with the Universal Wiring Adapter part # C51515.
The only other things you will need to complete your towing setup is a ball mount, hitch ball, and hitch pin. For this, I recommend the Curt Class II Drawbar part # C45522, 2" Hitch Ball part # C40018, and Curt Class I and II Pin and Clip part # F-4. If your trailer uses a different size hitch ball please let me know and I would be happy to adjust my recommendation accordingly.
Before getting started, you will also want to take a peek in your owner's manual for the vehicle's towing capacity as this will dictate the weight of the trailer that can be towed with the vehicle, not the trailer hitch.
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- For Towing
- Class II
- 350 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Is There a Class III 2" Trailer Hitch Receiver Available For a 1995 Buick Roadmaster?
- Q&A: Parts Needed To Install Curt Triflex Trailer Brake Controller C24VV In 2021 Ford Ranger
- Article: My Trailer Hitch Doesn't Fit
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Availability of Class III Hitch for 1996 Buick Roadmaster Estate Station Wagon
- Q&A: Differences Between Class II and Class III Trailer Hitches
- Q&A: Recommended Equipment for Towing a Trailer with a 1993 Buick Roadmaster
- Q&A: Comparing Trailer Wiring Harnesses for a 1996 Chevrolet Caprice Sedan
- Q&A: What Hitch do You Recommend for My 1987 Chevy Caprice Sedan?
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Choose the Right Trailer Hitch Class
- Article: Which Hitches are Made in the USA

