Recommended Trailer Hitch for 1994 Buick Roadmaster Estate Wagon
Updated 06/26/2026 | Published 05/15/2018
Products Featured in This Question
Question:
I have a 1994 Buick Road master wagon and have been searching for a class 3 trailer hitch without success. Im interested in possibly purchasing your Draw tite class 3 item#75676 which I noticed stated it May Not fit my wagon. My wagon is built to haul over 3500lbs. How do we go about finding out if it will fit without wording first?
asked by: James
Expert Reply:
I do have an option for you, however the Draw-Tite Class III Max-Frame Hitch Receiver # 75676 referenced in your question is designed for certain model year Lexus vehicles and will not fit your Buick Roadmaster Wagon.
For your vehicle, I instead recommend the Curt # C12009, which is confirmed to fit your 1994 Buick Roadmaster Estate Wagon. This is a Class II hitch with a 1-1/4 inch receiver opening, but it does feature a 3,500 pound towing weight capacity. This is the highest rated hitch we have available that will fit your vehicle. I have attached the written installation instructions that you can also look through.
Since it sounds like you will be doing some towing, I recommend the Curt T-Connector Vehicle Wiring Harness # C55352 to install a 4-Way trailer connector. This custom harness will plug right into existing ports behind the driver and passenger side tail lights, inside the trunk.
Tow tow a trailer, you will also need a ball mount and hitch ball. I have attached a great article that explains how to choose the right one for your setup, along with a link that will take you to our available selectin.
Adrian
6/22/2026
Hi, I got this receiver hitch for my 94 raodmaster wagon. The two back draw bars seem to be a lower than the frame after mounting the front four bolts. Is this normal? It's to use the u bolts. I understand that drilling holes is required but they seem about 1/2 inch from the frame.