Video Transcript for Checking Out the 2" Wide Continuous Hinge

Hello neighbors, Steve here with etrailer.com. Today we're taking a look at this two-inch wide continuous hinge, and it is six feet long, overall. Now, this hinge, folks, is gonna provide you a nice, sturdy, continuous support along the length of your cabinet door or panel. And again, this continuous design is gonna offer more support than your smaller, individual hinges. Everything's one single piece, so it's gonna be much, much sturdier. Now this will give you a 270 degree pivot point.

I'll zoom in here and show you that, so it can pivot 270 degrees. That's gonna give you full opening and closing. Now this is a weld-on or bolt-on installation. If you're bolting it on, obviously you're gonna have to drill a hole through it because it is one solid piece, but you can do that and then bolt it on. It is a very sturdy, 16-gauge heavy duty steel.

It's gonna be very durable, long lasting. It's made here in the USA. Again, it is six feet long and it's two inches wide. So each side of this is one inch, so one inch there, and one inch on that side. Now the pin diameter itself is three 16th of an inch, and the individual knuckle lengths are one inch.

So, two of these is one knuckle and that's one inch. Well, folks, that's gonna do it for our look at this two-inch wide continuous hinge, it's six feet long. I'm Steven, thanks for watching and have a great day.