B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Retail:$730.99
Our Price: $599.00
You Save: $131.99
Confirmed to Fit
2023 Ram 2500
6-1/2 Foot Bed without OEM Prep Pkg
8 Foot Bed without OEM Prep Pkg
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (3591)
- Q & A (0)
- Photos
2023 Ram 2500 - B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
- B and W
- Below the Bed
- Removable Ball - Stores in Hitch
- Wheel Well Release
- Manual Ball Removal
- 2-5/16 Hitch Ball
Install this heavy-duty hitch on your Ram 2500 so that you can securely tow your gooseneck trailer. Store the removable ball upside down in the hitch when you aren't towing to get complete bed access. Square ball base won't turn in hitch.
Features:
- Heavy-duty underbed hitch lets you tow your gooseneck trailer
- Complete truck bed access when you're not towing
- Remove ball from hitch, flip it upside down, and drop it back into hitch for storage
- 5/8" Thick, spring-loaded, steel locking pin on end of handle goes all the way through ball to secure it in place
- Access handle at rear driver's-side wheel well
- Single-piece, machined ball socket provides rugged durability
- Square ball base prevents ball from turning in hitch during hookup
- "Corners only" fit of stowed ball prevents grime buildup inside of hitch
- Specially designed accessories (sold separately) make it easy to customize the hitch to fit your needs
- Tow a 5th-wheel trailer with the B&W Companion hitch adapter
- Spring-loaded safety-chain hookups are built in
- Simple installation with included custom mounting kit
- No welding required
- Truck bed does not have to be removed
- 3-1/2" Diameter hole must be cut into bed
- Powder coated steel is sturdy and corrosion resistant
- Made in the USA
Specs:
- Gross towing weight: 30,000 lbs
- Vertical load limit: 7,500 lbs
- Ball size: 2-5/16"
- Limited lifetime warranty
Note: If your truck's suspension has a stabilizer in between the top of the differential housing and the frame, turning over the ball and stowing it in the socket could cause damage to your truck's suspension.
With the B&W Turnoverball underbed gooseneck trailer hitch you get the best of both worlds. When you go to tow, the Turnoverball creates a sturdy, dependable connection with your gooseneck trailer. And when you're done towing, you can stow the ball upside down in the hitch to get full bed access and a clean appearance.
Easy-to-Remove, Simple-to-Store Hitch Ball
The durable steel hitch ball included with the Turnoverball system secures in the hitch with a sturdy, 5/8" thick steel pin that is incorporated into the end of the operating handle. To lock the ball in place, drop it into the hitch hole in the bed of your truck. Then rotate the handle in your driver's-side wheel well counterclockwise until the latch engages. When the latch is engaged, the spring-loaded pin on the end of the handle will be inserted all the way through the base of the hitch ball, forming a strong, solid connection and ensuring absolute security when you're towing.
When you're done towing, remove the hitch ball by simply pulling the handle out as far as it will go and then rotating it clockwise until it unlatches. Remove the ball, flip it upside down, and drop it back into the ball hole of the hitch. Then reengage the latch to secure the stowed ball in place.
Unlike typical gooseneck balls - which have round bases - the Turnoverball hitch ball is designed with a square base. This makes latching the ball in the hitch easier because the base won't rotate inside of the hitch like a round base might, so lining the pin up is a snap. The base of the ball also fits tightly within the ball hole during storage. Because only the corners of the base contact the sides of the socket, any dirt or grime that gets into the hitch will fall through the socket, thus helping to prevent any buildup that could cause the ball to seize up in the hitch.
Simple, Custom Installation
This hitch is custom designed for your vehicle. The included mounting brackets bolt to existing holes in your truck's frame. While some modification is required - you will need to cut a 3-1/2" diameter hole in your bed for the hitch ball and drill holes for the built-in safety chain loops - there is no need to weld onto or to drill into your frame.
Once you have the hitch brackets and body installed, set up the operating handle. This handle is designed to be accessed from the rear driver's-side wheel well. On the end of the handle is the heavy-duty steel pin that secures the hitch ball.
B&W Turnoverball Gooseneck Hitch Accessories
B&W makes it easy to tow just about anything. With the many adapters and accessories available, the Turnoverball can be made to work with almost any gooseneck trailer. Hitch balls are available that have a built-in rise, an offset, and even a different connection type. Add on the Companion fifth-wheel hitch - which attaches directly to the Turnoverball with no other parts required - and you can tow your fifth-wheel trailer.
GNRK1320 B and W Turn Over Ball Under-Bed Gooseneck Trailer Hitch - 30,000 lbs
Item # BWGNRK1320
Installation Details
Tech Tip
No drilling required to install the frame brackets of installation kit. Installation rails are rated to meet vehicle manufacturer's tow ratings - see vehicle owner's manual , Installation kit will fit models with factory Air Suspension system
California residents: click here
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Alternate product found
Customer Reviews
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs - BWGNRK1320
Average Customer Rating: 4.8 out of 5 stars (3590 Customer Reviews)
Install this heavy-duty hitch on your vehicle so that you can securely tow your gooseneck trailer. Store the removable ball upside down in the hitch when you aren't towing to get complete bed access. Square ball base won't turn in hitch.by: Charles 04/02/2024
This is my second B&W GN hitch from Etrailer. 1st is over 2 years and this one is a year. Both have worked almost flawlessly. Only issue I have is that the ball release latch on this last one is really difficult to get to stay latched open to turn the ball.
by: Jack L02/29/2024
This B&W hitch preforms perfectly, my Companion Hitch slips right in and away we go, also it was very easy to install with having the template for the ball cut out, I also hook right on to my goose neck straight ball. Release mechanism works great. I keep a little lubricant applied to help it from seizing up when I'm not using it, awesome hitch, I've had a B & W Hitch for 24 years in two different trucks.
by: Michael 03/31/2024
Was actually surprised on how easy it was to install. I took a little time to go over the instructions and step by step had it done in 4 hours. The hardest part was getting the handle bolted together due to limited room on my power wagon.
by: James 04/20/2024
Works as advertised. Straightforward with installation, takes a few hours to install if you are handy with tools. After a year of hard use, still works well.
by: Hoot02/04/2024
Best gooseneck hitch by far. I wish I could get them OEM installed when I purchase new vehicles for my fleet.
by: Scott01/05/2024
Need proper tools and mechanical aptitude to complete installation and a helping hand but great hitch for my 5th wheel hook up
by: Jerry 04/20/2024
2021 Ram2500
Easy installation
by: Levi05/05/2024
Once installed, performs as promised. Perfect fitment in a 2022 Ram 2500 short bed. Used it for my fifth wheel for over 800 miles last year with no concerns. Ready for more this year.
I would recommend bed removal for the easiest install. I did it with bed on and it was tricky. Especially when torqueing the bolts down. But it’s possible.
Like others have said, this hitch would be that much better if the safety chain u bolts sat flush with the bed.
by: Jeff 02/16/2024
2023Ram2500
Arrived on time. Well made hitch. Excited for the install. Thanks eTrailer for the great brands and products you sell and the always exceptional customer service.
by: Dwight10/25/2023
This is my 2nd B&W turnover underbed hitch that I have purchased from e-trailer. Price was good, shipping was fast
and the hitch works absolutely great, and it was easy to install.
by: Daniel05/21/2020
This thing is awesome!! Well designed and can be installed at home. I have not towed with it yet but that will change soon. Would state that two things, 1st torquing this to spec will require the right tools. Second make sure you have a new/ sharp hole saw. When installing mine I had a used while saw that walked a little. Just a cosmetic issue and the spray in Berliner will fix!!
by: Jacob 07/25/2023
Dodge Ram Pickup
I removed the ram factory gooseneck hitch and replaced it with the b& w turnover. I did have to open up the holes in the hitch for the vertical factory bolts to fit. I also had to grind down the factory bolt closest to the fuel tank in order for the release latch to slide in and out. Lastly I had to bend the release lever in a few spots to operate smoothly. Swapping the factory for b&w hitch does work for anyone considering. I did so that I could continue using my companion hitch. This was cheaper than buying the big clunky ram fifth wheel base for the puck system. The installation videos were extremely helpful and I love purchasing from etrailer.com
by: Anthony04/14/2022
2019 Dodge Ram Pickup
The B&W turnover ball has performed flawlessly over the past year. We use it on our 2019 Ram 2500 and tow a 5th Wheel using the Andersen Ultimate Hitch. I love that the ball folds down flush with the bed of the truck and can have it setup and ready to go in 30 seconds.
Anthony
4/15/2023
Excellent Hitch, has worked great for over a year and thousands of miles towing our 5th wheel with the Andersen Ultimate hitch
by: Elizabeth F.07/10/2019
2019 Ram 3500
I installed this gooseneck hitch in my truck so I can use my single point mount B&W Companion. This installation was a little different since the truck has the factory prep package. The factory gooseneck uses four vertical bolts that go down from the top and cannot be removed without raising the bed. I left those bolts in place and reused the factory nuts and used the four B&W bolts in the horizontal positions. It worked perfectly. The only problem I had was the left front vertical mounting bolt hit one of the handle bracket bolts so I had to make some minor adjustments to the handle bracket. I also did not install the B&W chain hooks because I have the puck mount rings if I need them. The B&W gooseneck hitch appears to be much more heavy duty than the factory setup.
by: Eric04/22/2022
2021 Ram 3500
Worked out … Perfect upgrade to the factory system. I hated having to remove , and place the covers in the bed. Now that the safety chains are closer to the center I can load boards and stuff that I don’t want in the trailer in the bed without having to rearrange everything. Only thing is the safety chain hoops are little thicker than the bed ribs and stick up. So it’s not totally flat..
by: Anthony03/13/2022
Fantastic hitch, easy install and quality parts. The latch handle came missing from the package. Emailed etrailer, took some pictures of the box and etrailer made it right by shipping a latch handle at no cost to me. This is the reason why I will continue to be a return customer.
Anthony
3/14/2023
Super easy install on my 22 Ram 2500 and performs as advertised. My recommendation is to put grease on the ball if your leaving it in the receiver for an extended period of time. Seen way to many videos of the ball getting siezed in receiver. Slap some grease in there and that won’t happen. Highly recommended if you plan on getting the 5th wheel companion hitch because they really are designed to work perfectly together.
by: Evan06/23/2019
Good solid receiver. Straight forward install. I am a fairly competent mechanic and it took me about 3 1/2 hours to install. Bolts right up to factory crossmember no drilling cutting or welding to frame required. You’ll just have to zip tie a few wires out of the way. I would recommend removing the drivers side fender and soapy water on the exhaust hanger will make things a lot easier. I’m happy with how flush the receiver is in the bed completely flat With no obstruction of bed space at all. I did not install the chain hooks and i only plan on using it with my recon companion style fifth wheel hitch. The install was made a lot easier with a curved wrench as shown in my pictures.
by: Brian06/05/2020
2019 Ram 2500, Cummins, w/o factory prep. Love the versatility and easy installation of the B&W 1320 turnover ball. Installed it by myself with the only the tools listed in the instructions. E-trailer's instructional video was spot on and very helpful. Can now pull gooseneck as well as drop in the companion hitch and go camping.
by: John06/08/2021
2021 Ram2500
Hitch is well built!!!!Was easy to install. The video they provide is spot on! Very satisfied all the way around! Would definitely buy again.
I used a clamp to drill the pilot hole. Everything lines right up. B&W is a great product.
Installed this in a 2021 Ram 2500!
by: Michael 04/18/2024
excellent product,easy to install,customer service very helpful.
by: Jennifer/Luke12/29/2021
Couldn’t find this B&W turnover anywhere locally in a reasonable time frame. My internet search brought me to etrailer and George J. Customer service was unmatched and shipping was unbelievably fast. Installing was a breeze. B&W has done an excellent job making a high quality product that’s very easy to install. Above all, thank you etrailer/ George J for your help getting me what I needed fast and with great customer service. 1 year later I’m happier than ever and will never search else where for what I need.
Jenniferluke N.
12/31/2022
Perfect and everything I needed. The best part of my purchase was the first class customer service from ETRAILER. I was in Alaska and needed it fast. ETrailer understood, and got it to me in a few days! Every local place was months out to get it for me. Thank you everyone at ETrailer and Happy New Year.
by: Paul 05/01/2024
Fits perfectly
by: Kooper04/09/2024
2019 Ram2500
Great to work with and great products
by: Michael10/29/2021
2019 Dodge Ram Pickup
If you are installing this hitch on a RAM without the OEM hitch just follow the instructions. Everything is spelled out nicely.
My first conversion from the Ram puck system to the B&W was made in order to use their offset ball. It was on a 2018 RAM 2500 and was pretty straight forward using the four factory mounting bolts rather than those supplied with the hitch. That way I didn't have to remove the truck bed.
I just finished a second conversion on a 2019 RAM single wheel 3500. It was more complicated. I understood that this hitch was intended for a RAM without the factory hitch so I spoke to B&W to make sure the 1320 could replace my Original factory hitch. I was told it would. It did fit, however I had to drill out the holes for the four vertical mounting bolts to 3/4" so I could use the factory mounting bolts. This allowed me to install the hitch without removing the truck bed. I also had to shorten the front driver side factory bolt so it would clear the ball latch lever. I used the bolts supplied with the hitch for the four horizontal bolts because the factory bolts won't fit the B&W hitch. With the above modifications everything functions as it should.
I hope this helps anyone wanting to install the B&W on a RAM with the factory puck system.
Michael
10/31/2022
With the mods mentioned in my first review. The hitch works just like the one I installed in my 2018 Ram 2500 and I am pleased with the results. However, it was more complicated to install.
by: Ben L.07/05/2020
Easy install with supplied template and Jig. Beautiful fit and finish and this center section is beefy to say the least. Supplied instructions are tough to follow but if you are confident enough to tackle the job then you will most likely be ok without the instructions. The video was nice to watch but i did not see it untill after i installed it. Very happy over all. 2019 ram 3500.
25
3570
Show More Reviews
See what our Experts say about this B and W Gooseneck Hitch
- Fit of B&W BWGNRK1320 Turnover Ball Gooseneck Hitch on 2021 Ram 2500 w/ Factory Air Suspension According to B&W, their # BWGNRK1320 Turnover Ball Gooseneck Hitch will fit a 2021 Ram 2500 with the factory air suspension and Ramboxes. The Turnover Ball will install into the pre existing rails under the truck bed as shown in the linked video. If you don't already have a 7-way trailer connector in the truck bed so you don't have to run the trailer connector up over the tailgate, you can install one using part # 50-97-410. I've also linked to an installation video for the trailer connector...
view full answer... - Gooseneck Hitch Recommendation for 2021 Ram 3500 that Has OEM Rail KitIf your 2021 Ram 3500 has the OEM rail kit the gooseneck hitch solution your truck would need would be one that fits into the ball hole already present in the truck bed with the part # BWGNXA2062. If for some reason your truck didn't have the OEM rail kit you'd need a gooseneck hitch like the part # BWGNRK1320 which attaches to the truck frame and gives you a ball that turns over in the hitch.
view full answer... - Correct B&W Turnoverball Underbed Gooseneck Hitch For a 2019 Ram 3500 with RamBoxThe correct B&W Turnoverball Underbed Gooseneck Trailer Hitch for your 2019 Ram 3500 is part # BWGNRK1320. This will work with both short bed (6-1/2') and long bed (8') models as well as those with or without the RamBox. The B&W Turnoverball comes with everything that you need to tow a gooseneck trailer but if you also need to tow a 5th wheel trailer you can add the B&W Companion Slider Gooseneck-to-5th-Wheel Trailer Hitch Adapter part # BWRVK3400 or part # BWRVK3500.
view full answer... - 2022 Ram 2500 Correct B&W Gooseneck Hitch FitmentThe correct B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit # BWGNRK1314 that you are looking at fits a 2013 - 2018 Ram 3500 so for your 2022 Ram 2500 you need part # BWGNRK1320 instead as there was a fit change for the 2019 model year. This fits both the long and short bed models and installs to the frame of your truck without having to drill into anything. The only other thing I recommend picking up is an in-bed 7-Way like the Curt # C56000 which makes connecting...
view full answer...
- Recommended Gooseneck Hitch For 2019 Ram 2500 With 6.5 Foot Bed Without Factory Rail KitThe gooseneck hitch I recommend for a 2019 Ram 2500 is the B&W Turnoverball Underbed Gooseneck Trailer Hitch part # BWGNRK1320. The B&W Turnoverball Underbed Gooseneck Trailer Hitch is largely considered to be the best option on the market because of the square hole design which ensures the hitch ball does not get stuck when left in over time which can be an issue on options with the circular hitch ball hole. The B&W Turnoverball Underbed Gooseneck Trailer Hitch will also be easy to install...
view full answer...
- Recommended Gooseneck Trailer Hitch for 2022 Ram 3500 TradesmanFor your 2022 Ram 3500 I recommend the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit # BWGNRK1320. This heavy-duty hitch has a gross towing weight of 30,000 lbs and veritcal load limit of 7,500 lbs. The kit includes everything you need to get the gooseneck hitch installed on your truck. The hitch has a simple installation with no welding required. It is also compatible with the B&W Companion BWRVK3500-5W if you want to use a 5th wheel at some point in the...
view full answer... - Why Can't I Use a B&W Companion RVK3500 5TH Wheel Hitch With The Reese Sidewinder Pin Box?You cannot use the B&W Companion # BWRVK3500 with the Reese Sidewinder 5th Wheel King Pin # RP34FR due to the single mounting point of the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1320. The single mounting point is not strong enough to resist the torsion that is placed on the 5th wheel hitch by the Sidewinder pin box when you are turning. There are no goose neck type hitches that are compatible with the Sidewinder as they all use a single mounting point. You are going...
view full answer... - Suspension Enhancement System and Gooseneck Hitch for a 2022 Ram 2500 w/ 8 Bed and No Prep PackageFor your 2022 Ram 2500 with the 8' bed and no prep package I recommend the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1320. This hitch is sourced and made in the USA and will give you the best of both worlds. When you go to tow, the Turnoverball creates a sturdy, dependable connection with your gooseneck trailer. And when you're done towing, you can stow the ball upside down in the hitch to get full bed access and a clean appearance. For a suspension enhancement system I...
view full answer... - Will The Air Lift Air Bag Helper Springs AL88231 Fit With B&W Turnover Ball Gooseneck Hitch? Yes, the Air Lift LoadLifter 5000 Ultimate Air Helper Springs # AL88231 will work with the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1320 on your 2020 Ram 3500. The only reason you would not be able to install the Air Lift springs on your Ram is if you already have the factory air system or another aftermarket system. I recommend using the Air Lift WirelessAIR Compressor System # AL58WQ with the air springs. This compressor uses a smart manifold which allows you to make...
view full answer... - 2022 Ram 2500 Without OEM Tow Prep Package Gooseneck Hitch RecommendationI have what you need. Lets go with the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs # BWGNRK1320 and the 5th Wheel/Gooseneck 90-Degree Wiring Harness w/ 7-Pole Plug - GM, Ford, Ram, Toyota - 9' Long # 50-97-410. These will give you the connections both physical and electrical to tow up to 30000 pounds or the max load of your 2022 Ram 2500. Whichever is less.
view full answer... - Gooseneck Hitch for Pre Existing Frame Rails in 2021 Ram 3500We've got you covered. The # BWGNRK1314 B&W Turnover Ball gooseneck hitch you'd looked at is for the previous generation truck and wouldn't work in your 2021 Ram 3500. No worries though, the # BWGNRK1320 for the current generation will fit perfectly into the pre-existing frame bracketry in place on your 2021 Ram 3500 as you can see in the linked video. You won't need the ball kit, as the ball and the safety chain loops are included. If you'd like a bed-mounted 7-way so you don't have...
view full answer... - How to Use B&W Companion on 2019 Ram 3500 Long Bed DuallyIf the B&W Companion you used on your 2014 Longhorn was designed to fit the factory puck system then it would fit the puck system on a 2019 Ram 3500 as well, but since you don't have the OEM puck system you just need to install the Custom Underbed Installation Kit # BWGNRK1320 and then use the Companion Base # BWRVB3500 with the Companion Head Assembly # BWRVC3006 that you currently have. This gives you the stationary Companion # BWRVK3500 which fits directly into the gooseneck receiver...
view full answer... - Can a Reese Goose Box Fifth Wheel Adapter be Used with 2019 Ram 3500 Mega CabThe mega cab versions of the 2019 Ram 3500 have a 6-1/2 foot bed so if you were to use the Reese Goose Box part # RP94720 you'd need to make sure the trailer you install it on as a tapered nose which would allow better turning clearances. It's definitely possible but if the trailer has a standard width nose without any taper you'd most likely have cab/trailer nose interference in tight turns. If you send me the info on the trailer you are considering though I can check it out and give you...
view full answer... - Best 5th Wheel Hitch Recommendation for 2020 Ram 2500 Short Bed without OEM Rail KitFor your 2020 Ram 2500 short bed without the OEM rail kit I highly recommend the B and W Companion slider hitch part # BWRVK3400 with the rail kit part # BWGNRK1320. The Companion hitches are widely considered the best hitches around for a number of reasons. They are made in the USA, they are very well made which allows them to be easy to use, reliable, and long lasting, and they very quiet compared to other hitches due to the very tight jaw design. What's also really great is that the...
view full answer... - Fifth Wheel Hitch and Rail Kit for 2019 Ram 2500 that Will Give Clean Bed When Not TowingSince you want a clean bed when not towing a fifth wheel trailer your best solution will be with the B and W Turnoverball Rail Kit part # BWGNRK1320 for your 2019 Ram 2500 that will allow you to use either the fixed Companion hitch part # BWRVK3500 (if you have a long bed) or the slider part # BWRVK3400 for if you have a short bed and need turning clearance. All of the Curt options that fit your truck would require you to install a rail kit like you are trying to avoid.
view full answer... - Which B and W Gooseneck Hitch Fits 2021 Ram 2500For the 2021 Ram 2500 the correct B and W Gooseneck hitch is the part # BWGNRK1320. This would not be the same hitch as what would have came off of a 2012 Ram so what you have now would not fit.
view full answer... - What is the Best Gooseneck Hitch for a 2023 Ram 2500?The best gooseneck hitch for a 2023 Ram 2500 is the B&W Turnoverball Underbed Gooseneck Hitch item # BWGNRK1320. It fits both the 6-1/2' and 8' bed lengths and the diesel models. This system includes custom fit brackets that bolt into existing holes in your Ram's frame. The only drilling you will need to do is in the bed when you add the holes for the receiver and the safety chains. This underbed system allows you to store the 2-5/16" hitch ball upside down and inside your bed when you...
view full answer... - What is the Best Gooseneck Hitch for a 2023 Ram 3500?I would be happy to help you! The best gooseneck hitch for a 2023 Ram 3500 is the B&W Turnoverball Underbed Gooseneck Hitch item # BWGNRK1320. This system has a massive 30,000 lbs towing capacity. It fits both the 6-1/2' and 8' bed lengths and the diesel models. This system includes custom fit brackets that bolt into existing holes in your Ram's frame. The only drilling you will need to do is in the bed when you add the holes for the receiver and the safety chains. This underbed system...
view full answer... - Flat Bed 5TH Wheel Hitch For a 2019 Ram 3500 With Factory In Bed Gooseneck HitchThe Demco Recon 5th Wheel Trailer Hitch # DM8550045-5W is going to be the closest 5th wheel hitch to a B&W Companion Flatbed Gooseneck-to-5th-Wheel Trailer Hitch # BWRVK3050. This will mount to the Hitch Ball # C60618 in the factory in bed mount on your 2019 Ram 3500. If you need the 10-1/2" height of the Companion versus the 15-1/2" of the Recon you do have the ability to remove the center section of the factory in bed hitch and install the B&W Turnoverball Underbed Gooseneck Trailer...
view full answer... - Can I Tow A Fifth Wheel With A 2020 Ram 2500 With Ram Boxes?Hello Rhys, I can definitely help with this. First, I will start by saying that trucks with the Rambox really are not ideal for towing a 5th wheel camper. It can be done, however I cannot recommend using the Turnoverball, offset ball and goosebox combination that you mentioned. The issue with Ram Box is that it limits the ability of the pin box to rotate in the truck bed. This will drastically decrease your turning clearance and the goosebox would not clear the Ram box on turns. The only...
view full answer... - Gooseneck Hitch Recommendation For a 2022 Ram 2500 w/ 8' Bed and No Factory Prep PackageThe gooseneck hitch that I recommend for your 2022 Ram 2500 w/ 8' bed and no prep package is the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit # BWGNRK1320. This hitch is made in the USA, has a square ball base that will not turn in the hitch and the removable ball can be flipped upside down and stored in the hitch for storage.
view full answer... - Dimensions Of B&W Companion Sliding 5TH Wheel Hitch For Tail Gate ClearanceYou should not have any issues with fitment of the B&W Companion Slider 5th Wheel Hitch # BWRVK3400 on your 2021 Ram 2500 short bed. You can verify this as the measurement from the center of the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1320 to the rear edge of the Companion hitch is 19"(see image). Be sure to get a Lube Plate # 16721 for your 5th wheel king pin. The B&W 5th Wheel Lifting Device # BWRVXA3130 will make lifting the 277lb hitch out of your bed much easier...
view full answer...
- Gooseneck Hitch For a 2023 Ram 3500 Without Factory In Bed Prep Gooseneck HitchWe have the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1320 for your 2023 Ram 3500. This will mount in the same place the factory gooseneck hitch mounts. The best benefit of the B&W is the square shank. This shank allows the hitch ball to be flipped over when not needed. It will also allow for a Fixed # BWRVK3500 or Sliding # BWRVK3400 5th wheel hitch depending on your bed length. I recommend adding the In Bed 7-Way # 41157 when you install the gooseneck hitch. This will...
view full answer... - Can B&W Turnover Ball Gooseneck Hitch Be Installed on RamBox Equipped 2022 Ram 2500According to the fine folks at B&W hitch, having the Rambox option on your truck won't prevent you from installing and using a B&W Turnover Ball gooseneck hitch on your 2022 Ram 2500. You'll want to use the # BWGNRK1320 which will bolt up to the existing rails already in place under your truck bed. You'll just need to cut the hole in the bed and bolt up the hitch. If you'd like to install a 7-way trailer connector in the truck bed so you don't have to run the trailer connector up over...
view full answer...
Do you have a question about this Gooseneck Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Installed by:
Jeff D
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Jonathan Y
Updated by:
Kathleen M
Updated by:
Wilson B
Updated by:
Matthew E
Updated by:
Noah M
Updated by:
Justice A
Test Fit:
Robert C
Test Fit:
Ryan G
Test Fit:
Clayton O
Test Fit:
Bradley B
Written by:
Kristina F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Daniel
5/23/2021
Only way to go! I have used this with my Reece Goosebox and love it. With over 4,000 miles pulling and 9,000 miles on the truck total I have not complaints at all. Would recommend to ensure you grease the ball every time you hook up!!