B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Item # BWGNRK1309
Our Price: $599.00
Confirmed to Fit
2012 Dodge Ram Pickup
1500 - 5-1/2 Foot Bed
1500 - 6-1/2 Foot Bed
1500 - 8 Foot Bed
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (3608)
- Q & A (0)
- Photos
2012 Dodge Ram Pickup - B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
- B and W
- Below the Bed
- Removable Ball - Stores in Hitch
- In Bed Release
- Manual Ball Removal
- 2-5/16 Hitch Ball
Install this heavy-duty hitch on your Dodge Ram Pickup so that you can securely tow your gooseneck trailer. Hitch ball can be removed and stored when you aren't towing to get complete bed access. Square ball base won't turn in hitch.
Features:
- Heavy-duty underbed hitch lets you tow your gooseneck trailer
- Complete truck bed access when you're not towing
- Remove ball from hitch, flip it upside down, and drop it back into hitch for storage
- 5/8" Thick, spring-loaded, steel locking pin on end of handle goes all the way through ball to secure it in place
- In-bed latching mechanism is used to secure and release ball
- Single-piece, machined ball socket provides rugged durability
- Square ball base prevents ball from turning in hitch during hookup
- "Corners only" fit of stowed ball prevents grime buildup inside of hitch
- Spring-loaded safety-chain hookups are built in
- Simple installation with included custom mounting kit
- No welding required
- Truck bed does not have to be removed
- 4" Diameter hole must be cut into bed
- Powder coated steel is sturdy and corrosion resistant
- Made in the USA
Specs:
- Gross towing weight: 30,000 lbs
- Vertical load limit: 7,500 lbs
- Ball size: 2-5/16"
- Limited lifetime warranty
With the B&W Turnoverball underbed gooseneck trailer hitch you get the best of both worlds. When you go to tow, the Turnoverball creates a sturdy, dependable connection with your gooseneck trailer. And when you're done towing, you can stow the ball upside down in the hitch to get full bed access and a clean appearance.
Easy-to-Remove, Simple-to-Store Hitch Ball
The durable steel hitch ball included with the Turnoverball system secures in the hitch with a sturdy, 5/8" thick steel pin that is incorporated into the hitch. To lock the ball in place, drop it into the hitch hole in the bed of your truck. Then rotate the handle in your truck bed until the latch engages. When the latch is engaged, the spring-loaded pin will be inserted all the way through the base of the hitch ball, forming a strong, solid connection and ensuring absolute security when you're towing.
When you're done towing, remove the hitch ball by using the in-bed handle to disengage the latch. Remove the ball, flip it upside down, and drop it back into the ball hole of the hitch. Then reengage the latch to secure the stowed ball in place.
Unlike typical gooseneck balls - which have round bases - the Turnoverball hitch ball is designed with a square base. This makes latching the ball in the hitch easier because the base won't rotate inside of the hitch like a round base might, so lining the pin up is a snap. The base of the ball also fits tightly within the ball hole during storage. Because only the corners of the base contact the sides of the socket, any dirt or grime that gets into the hitch will fall through the socket, thus helping to prevent any buildup that could cause the ball to seize up in the hitch.
Simple, Custom Installation
This hitch is custom designed for your vehicle. The included mounting brackets bolt to existing holes in your truck's frame. While some modification is required - you will need to cut a 4" diameter hole in your bed for the hitch ball and drill holes for the built-in safety chain loops - there is no need to weld onto or to drill into your frame.
B&W Turnoverball Gooseneck Hitch Accessories
B&W makes it easy to tow just about anything. With the many adapters and accessories available, the Turnoverball can be made to work with almost any gooseneck trailer. Hitch balls are available that have a built-in rise, an offset, and even a different connection type. Add on the Companion fifth-wheel hitch - which attaches directly to the Turnoverball with no other parts required - and you can tow your fifth-wheel trailer. Even a truck bed utility rack is available so that you can easily haul ladders and lumber with the load placed on the hitch (and therefore your truck's frame) instead of your bed rails.
GNRC909 B and W Turn Over Ball Under-Bed Gooseneck Trailer Hitch - 30,000 lbs
GNRM1309 B and W Turn Over Ball Gooseneck Custom Installation Kit
Installation Details
Tech Tip
No drilling required to install the frame brackets of installation kit. Installation rails are rated to meet vehicle manufacturer's tow ratings - see vehicle owner's manual
California residents: click here
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Did not arrive in time
- Product did not meet expectations
- Wrong item was ordered
Customer Reviews
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs - BWGNRK1309
Average Customer Rating: 4.8 out of 5 stars (3607 Customer Reviews)
Install this heavy-duty hitch on your vehicle so that you can securely tow your gooseneck trailer. Hitch ball can be removed and stored when you aren't towing to get complete bed access. Square ball base won't turn in hitch.by: Danielle 01/12/2023
2014 Dodge Ram Pickup
I bought this hitch for my 2014 Ram 1500. I love it. I've had a few gooseneck hitches in my life and this one is my favorite. I love the fact you can unlock the ball in the bed without jumping in and out. Just turn the key provided and turn the ball over. If I replace this truck down the road, I will be ordering this hitch again. Great hitch, strongly recommend.
by: Joseph01/23/2024
Dodge Ram Pickup
This B&W Turnover Underbed Gooseneck Trailer Hitch setup fit my RAM 1500 perfectly. Removal of the ball is a breeze and it secures firmly in place when re-installed.
by: Mike12/13/2023
2017 Ram 1500
I ordered this hitch and it was shipped quickly. I have ordered in the past from eTrailer and been very happy with their service.
I watched a video you had online. The installation was simple and the hitch fit perfectly. I followed the instructions and installation was a breeze.
by: Kent04/07/2024
2012 Ram 1500
Straight forward instructions.My son and I did it in about three hours.
by: Clay08/20/2022
Fits like a factory installed option. Works great. I installed the gooseneck on my 2018 Ram 1500 crew cab 4x4 and installed airbag overload bags. I pull a Tri axle 16 ft dump trailer
by: David03/07/2021
2017 Ram 1500
The fit of the assembly is good however some of fasteners were missing; 2-1/2” x 2 1/4” bolts, 2-1/2” flat washers (45 minute trip to hardware store). Snap ring not installed on bottom of the locking mechanism (very hard to install it after the assembly is in the truck and another trip to the hardware store for snap ring pliers)
by: Jim 07/05/2023
This is my third B&W a d as always a great product. Ordering from retailer was a good experience with no issues. There was a huck up in the install with the exhaust hitting the hitch framework but ither than
That it was pretty seamless.
by: Beau F.12/10/2013
2011 Dodge Ram Pickup
B&W hitch and pollack harness installed by self in a 2011 ram 1500 through etrailer.com
by: Charles D04/05/2023
Great hitch and great customer service. It even came a couple of days before they said it would. I am very satisfied and would recommend the hitch and e trailer
by: Anthony 04/04/2023
2018 Dodge Ram Pickup
Works great. The ball release isn’t in the wheel well like it it in most trucks, for my 18 ram 1500 the release is in the bed.
by: John01/22/2017
Dodge Ram Pickup
The B&W turnover ball hitch is worth every penny! It's built solid and fits perfectly! The instructions are detailed and easy to follow! I've been using it in my Ram 1500 to haul a 3 horse slant load trailer and couldn't be happier! I absolutely love the relocation of the ball release to the inside of the bed!
I have a crew cab, so I'm going to purchase a B&W extension so that I can have full clearance in tight turns and would suggest ordering that with your hitch.
John
1/25/2018
A year later, I am still completely satisfied! I havent had a single issue out of the hitch. Its still worth every penny.
by: Rick10/18/2022
2017 Ram 1500
still waiting to get it installed because part of the kit was missing when it arrived. working with an agent to resolve the problem, but here I sit with a $XXX hitch that can't be installed. Not very happy.
by: Pete04/05/2015
2010 Honda Pilot
Talk about putting 10 pounds of crap in a 5 pound bag! Engineering for this goose neck hitch is excellent. Everything fits perfectly and the instructions are very good. One word of advice, where the instructions direct you to remove the plug fasteners holding the wiring harness on the rear cross member, remove them. If you cut them off it leaves a small piece of plastic protruding which causes the mounting holes in the hitch to misalign.
The hitch can be installed by one person but after installing mine I highly recommend two. The instructions suggest a motor lift, overhead lift or similar to lift and hold the center section of the hitch in place. I would say that it is essential. The first thing that you will do is drill the 4 inch hole in the bed, when all parts are in place you will need to pull the center section up into the hole that you drilled and then tighten the other parts to the center section.
You will need a couple of things that most people don't have laying around, two hole saws, a 4" and a 3/4". You should also consider picking up a 24" long 7/16" bit. You will need this for drilling the pilot holes for the safety chain attachments from underneath the truck bed.
An excellent product with instructions written for the first time installer in mind.
by: Odin09/22/2020
I liked the fact that the lever to release the the ball so you can turn it over is in the bed instead inside the wheel well like the other products were. The instructions were right on the money as well never liked when the instructions direct you to measure and drill blindly, however these measurements were right on the money. I wanted a tight fit so there was no slop... selected a hole saw that was just over the o.d. of the hitch... it fit perfectly. Kudos to the engineers for getting the measurements right.
by: Tyler06/05/2020
Installed in my 2016 Ram 1500 with 5'7" box EcoDiesel, with Ram Boxes and factory air ride suspension .
First off, I love working with etrailer, the support staff and the Q&A posted to each item is extremely helpful, and if it wasn't for the installation video it would have taken me much longer to install this hitch. Not to mention the quick delivery, and the ability to track the order.
I am a pretty competent mechanic, being a farmer we change all our own fluids and take care of most repairs on the farm ourselves, equipment and vehicles. With that being said, I would find it nearly impossible (not saying it can't be done) to be able to install this in 3 hours. if I were to do it again I would plan for 5 hours. Again, if it wasn't for the video, it would have taken much longer.
While installing I did have to pull out more of the electrical and air line clips than I thought I had to, in order to not have anything pinched. I also was able to maneuver the air line in between the front rail and the rear rail of the hitch. After hitch was installed I did place a zip tie around the air line to keep it fairly secure.
The instillation was very difficult, to get the bolts started (I did, run bolts through the threads prior to putting together under the truck) and tightened. I would say the toughest part was getting the torque wrench on every thing, as it is very tight under there, especially on the driver side. On that side the brake lines and the fuel tank always seemed to be in the way.
One issue I did have, is cutting the 3/4" hole in the bed. the instructions state that the 3/4" hole is 4-3/4" from the center of the 4" hole. I guess I assumed that measurement was center to center. When I placed the center section under the truck and raised it up to the bed, I found that I was about 3/4" off from the mark So I drilled a second 3/4" hole. Disappointed, that there is an extra hole in the bed, I'll have to do some research on how to fill the extra hole in.
I have 5 hours into the installation, all I have remaining is putting the wheel well liners back in and re mounting the spare tire.
The hitch fits very tightly in between the frame and the bed, it will fit, trust me!
by: John C05/21/2021
2018 Dodge Ram Pickup
I have used this hitch on about 20 trips with our 5th wheel and it is an awesome, simple clean, strong, solution to towing a 5th wheel. Our truck is a 2018 Ram 1500 Short (5’7” long box with the Ram boxes on each side) . Worked perfect.
Would buy it again. That says it all.
by: Mark D03/19/2017
2011 Ram 1500
First and foremost, the B&W is the Rolls Royce of Gooseneck hitches. It installs well, and is stout! No need for any performance or quality worries.
Install was done in an afternoon, if you have a lift it would cut your time in half. Rolling around underneath the truck is hard on even a 46 year old, that's not B&W's fault! Very nice product! Thank you!
by: Dusty M.02/19/2020
I’ve been using this model for a year now. Pulling 40’ flatbed or 3 horse slant with living quarters regularly. Besides normal wear on the ball unit, rest of the hitch is rust free. Would definitely recommend it for ease of installation and it’s continued performance since the first day using it.
by: Diane01/14/2022
Although I haven’t had the gooseneck hitch or the extender installed on my truck yet, I just want to respond to the customer service I received. I spoke with two different ladies over two days and they help me figure out which hitch I needed for my truck and were extremely helpful. I was told I would receive the hitch in about a week but it showed up two days later. I’m very happy with the company and would definitely use them again
by: Craig06/16/2022
2015 Ram 1500
Well built and design with no holes to drill in frame is why I made the purchase. Very happy with the hitch. Fast shipping and good communication. Also your installation video was extremely helpful. Thanks
by: Robert E.03/22/2017
Great product!! Simple installation, perfect fit. Functions better than I anticipated and it is holding up to weekly use, very well.
Robert E.
3/26/2018
Great hitch assembly, works very well.
by: Elijah11/08/2018
2013 Dodge Ram Pickup
Just installed in about 3.5 hours. Was kinda difficult just crawling around on the ground. Everything pieced together just fine, however, the driver side of the unit was kinda hard to put together, might've been my bigger gas tank. Thanks to the installation video it made it loads easier to understand. My 2013 Ram 1500 already hauled my 16' goose neck stock trailer around for the fun.
by: Mark 07/23/2021
went together without any major issues. The only issue is that the bottom nut on the rear most bracket on the drivers side is tight up against the exhaust pipe. Will have to have a muffler shop figure out a way to get some clearance before the nut wears a hole tin the pipe.
by: John01/08/2020
In my application the OE turnover ball is of no value, 5.5" bed. Maybe an option to replace standard ball with 4" offset ball and save $40.00.
25
3553
Show More Reviews
See what our Experts say about this B and W Gooseneck Hitch
- How Tall is B and W Gooseneck Ball When Installed in Truck BedFrom the truck bed to the top of the ball measures 4-1/16 inches. I attached a picture that shows how tall above your truck bed the ball of the B and W Turnoverball hitch # BWGNRK1309.
view full answer...
- Is There a Puck System Available for a 2014 Ram 1500 Short BoxI do have some solutions for you but unfortunately there are no puck systems (like what you would get OEM) for your 2014 Ram 1500. If you have the 6-1/2' bed then you can actually use the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1309 with the B&W Companion Slider # BWRVK3400 so that you have a completely clear bed when you remove the 5th wheel hitch. For a 5-1/2' bed though you will need the base rail kit # RP50142-58 along with a fixed 5th wheel hitch like the 16K #...
view full answer... - Parts To Tow 5th Wheel and Gooseneck Trailers with a 2018 Ram 1500 6-1/2' BedGreat question! The B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1309 latch pin system being in the bed means you can only use the B&W Offset Ball # BWGNXA4685 and the fixed B&W Companion Hitch # BWRVK3500 as the Companion has room for the pin when the head is removed. Since your 2018 Ram 1500 has a 6-1/2' bed you'll be really pushing 5th wheel trailer to truck cab clearance so you would need to use the sliding Companion but unfortunately that can't be used with this latching...
view full answer...
- Recommended Gooseneck Hitch for a 2009 Dodge Ram 1500I have a great gooseneck hitch that will fit all bed lengths of the 2009 Dodge Ram 1500. It is the B&W item # BWGNRK1309. The Turnover Ball System gives you complete access to your bed when not in use. You simply remove the ball from hitch, flip it upside down, and drop it back into hitch for storage. I linked an installation video below that we did on a 2011 Dodge Ram. To make towing with a gooseneck trailer easier, I recommend adding the Curt 5th Wheel/Gooseneck Custom Wiring Harness...
view full answer... - Offset Gooseneck Ball for 2017 Ram 2500 with B&W Gooseneck Trailer Hitch BWGNRK1384For B&W gooseneck trailer hitch # BWGNRK1384 in your 2017 Ram you can use offset ball # BWGNXA4085. The other one you mentioned, # BWGNXA4685, was designed for the B&W gooseneck hitch # BWGNRK1309 which is for the Ram 1500 so it is not compatible with the 2500 or 3500 Rams. So in other words you will need # BWGNXA4085.
view full answer... - Gooseneck Hitch Recommendation for a 2014 Ram 1500 EcoDiesel 5-1/2 ft BedIf you are trying to tow a gooseneck trailer I have a solution for you, but at this time there are no fifth wheel rail systems available for the 5-1/2 foot bed ecodiesel model 2014 Ram 1500s. For a gooseneck hitch confirmed to fit your truck you would want the B and W Gooseneck Hitch part # BWGNRK1309.
view full answer... - Best Gooseneck Hitch for a 2017 Ram 1500 5-1/2 Foot BedThe correct gooseneck hitch for your 2017 Ram 1500 is the B&W Turnoverball Underbed Gooseneck Trailer Hitch part # BWGNRK1309. The B&W Gooseneck Trailer Hitch part # BWGNRK1110 that you referenced will not fit your Ram. The B&W hitch is considered by most to be the best gooseneck hitch on the market. It has a turnover ball design that allows you to store the hitch ball upside down and it has a 30,000 lb towing capacity. It will also allow for a drop in 5th wheel hitch to be used such as...
view full answer... - Hitch Ball Cover for B&W Turnoverball Underbed Gooseneck Trailer HitchesI went out to our warehouse and measured the opening of the B&W Turnoverball and found that to be 2-1/2" therefore you could also use any of our standard hitch covers that work with 2-1/2" trailer hitch receivers like part # C22277.
view full answer... - Comparing Gooseneck Hitches For A 2012 Ram 1500I double checked with curt and I can confirm that the Curt Gooseneck Hitch # C60730 will indeed fit the 5.5' bed 6.5' bed and 8' bed models of the 2012 Ram 1500. The same can be said of the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1309. So they are going to fit regardless of bed size. If y'all are trying to decide between the two, I highly recommend the B&W Turnoverball over the Curt. B&W products are known for being top quality. The ball uses a unique square base, which...
view full answer... - Recommended Gooseneck Hitch with Easy-to-Use Latch for 2018 Ram 2500The reason for the difference between the B&W Turnoverball Gooseneck Trailer Hitch # BWGNRK1309 (which is designed to fit the 2017 Ram 1500) and the B&W # BWGNRK1384 (for the 2018 Ram 2500) simply has to do with the way they need to install to the frame rails on each model. The two trucks are different enough that the same latch system on the 1500 model cannot be utilized on the later model 2500. I definitely understand valuing the convenience of this type of latch so if this is important...
view full answer... - Is Air Lift Load Lifter Kit for 2017 Ram 1500 Compatible with B and W Turnoverball Gooseneck HitchYes the Air Lift LoadLifter part # AL57365 is compatible with your 2017 Ram 1500 that has a B and W Turnoverball gooseneck hitch part # BWGNRK1309 installed.
view full answer... - Replacement Latch Pin Handle For B&W Turnoverball Gooseneck Hitch BWGNRK1309I do know the L looking key that you stick in the square hole of the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1309, as that is the latch pin handle. The replacement you need is the Replacement Latch Pin Handle for B&W Turnoverball Underbed Gooseneck Trailer Hitch # BW0909-2-2002PL.
view full answer... - Gooseneck Trailer Hitch Recommendation for 2013 Dodge Ram 1500 With 5-1/2 Foot BedThe best gooseneck hitch for your 2013 Ram 1500 with a 5-1/2 foot bed is the B&W Turnoverball Underbed Gooseneck Trailer Hitch with Custom Installation Kit # BWGNRK1309. The Turnoverball hitch is the best because it has a square base for its hitch ball which ensures optimal strength and durability. What that means is the ball isn't going to turn when you are driving, keeping the connection to your gooseneck coupler totally secure and stable. The square base of the hitch, along with its...
view full answer... - Installation of Buyers Products Gooseneck Hitch PlateSince the Buyers Products # 3373014981 is a universal fit product, there are no instructions specific to your 2014 Ram 1500. If your 2014 Ram 1500 does not have a structural steel bed, it will need to be bolted to the frame of the truck-which may require drilling. You may be able to use existing holes in the truck's frame, but it's more likely that you will need to drill your own holes for installation. If you've got a flat bed with a structural steel bed you can weld this plate directly...
view full answer... - Available Underbed Gooseneck Hitch with Custom Installation Kit for 2012 Ram 1500 Laramie Short BedI have a solution for you, but there is not a custom installation kit available for the Hide-A-Goose Underbed Gooseneck Trailer Hitch # 9465 that is compatible with a 2012 Ram 1500 Laramie Crew Cab, so you will need to go another route. The only available underbed gooseneck hitch with a custom installation kit for your 2012 Ram 1500 Laramie is the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit # BWGNRK1309. The B&W Turnoverball will allow you full bed access...
view full answer... - Gooseneck Trailer Hitch Fit for 2015 Ram 1500 With EcoDiesel EngineWe have a great option for a gooseneck trailer hitch that fits your 2015 Ram 1500 with the EcoDiesel engine, but the Remov-A-Ball won't fit your truck with that engine. Instead, I recommend the B&W Turnoverball Underbed Gooseneck Trailer Hitch with Custom Installation Kit # BWGNRK1309. The Turnoverball has a square base and powder-coated steel construction, which are two of the reasons it is considered by many to be the best gooseneck hitch available. The gooseneck ball is also something...
view full answer...
- Gosseneck/5th Wheel Towing Capacity of 2018 Ram 1500 Big Horn Crew CabThe towing capacity (gooseneck/fifth wheel/bumper pull) of a 2018 Ram 1500 Big Horn Crew Cab will vary by axle ratio and drive type. If you have a 4x2 model then your towing capacity is 8,010 lbs if you have the 3.21 axle ratio or 10,190 lbs if you have the 3.92 axle ratio. If you have a 4x4 model then your towing capacity is 7,760 lbs if you have the 3.21 axle ratio or 9,810 lbs if you have the 3.92 axle ratio. The axle ratio should be listed on a sticker in the glove box or on the window...
view full answer...
- Gooseneck Trailer Hitch for a 2015 Ram 1500 EcoDiesel with Air Suspension and 5-1/2 Foot BedThere is one gooseneck trailer hitch for the 2015 Ram 1500 with the 5-1/2 foot bed and air suspension package. It is B&W Turnover Ball hitch # BWGNRK1309. I have linked a video review of this hitch for you. Since you have such a short bed you may also need the offset ball # BWGNXA4685 and/or an alternate gooseneck coupler that offers 10 inches of additional clearance, # BWTEXA4200.
view full answer... - B and W Gooseneck Hitch and Air Bag Kit Recommendation for 2014 Ram 1500The B and W Gooseneck Turnoverball Gooseneck hitch part # BWGNRK1309 that you referenced is a confirmed fit for your 2014 Ram 1500 regardless of if you have an air bag kit installed so either way you are okay to start with just the hitch. I attached an install video link for this kit for you to check out as well. When you are ready then the Firestone Coil Rite kit part # F4185 is the correct air bag kit for your truck. It installs in the coils of the rear suspension so frame brackets...
view full answer... - Demco Hijacker Autoslider 5th Wheel Hitch for 2016 Ram Rebel 1500 w/ Air SuspensionAlthough there are Demco Hijacker Autosliding hitches that would work with your 2016 Ram Rebel 1500, there are unfortunately no Demco under bed mounts that are compatible with the air suspension so you'd need to go with the above bed mounts. Demco doesn't offer an above bed mount that'll work with the air suspension, but luckily Reese does. So, you could use the Demco Hijacker Autoslider along with a Reese # RP50142-58 above-bed rail kit. The Reese kit uses industry standard rails as does...
view full answer... - B&W Turnoverball Gooseneck Installation Kit For 2019 Ram 1500 ClassicWe do have the right B&W Turnoverball gooseneck hitch installation kit for your 2019 Ram 1500 Classic, though it's a different part number than the one you referred to. Instead you'll need the following: - B&W Turnoverball Gooseneck Custom Installation Kit for Dodge # BWGNRM1309 This will fit all models, including with the EcoDiesel and your Tradesman. For the entire hitch including the center gooseneck portion you need the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation...
view full answer... - Will a B and W Hitch on a 1998 Dodge Ram 2500 8 Foot Bed also Fit a 2010 Dodge Ram 1500 6 Foot BedThe B and W Goosenck Turnoverball Underbed Gooseneck hitch that you referenced # BWGNRK1394 is indeed a fit for the 1998 2500 Dodge Ram 2500 with an 8 foot bed, and was considered a fit for the 1994 - 2001 Dodge Rams with either a 6 foot bed or an 8 foot bed. It also fit the 2000-2002 Dodge Ram 2500 and 3500 6 and 8 foot bed trucks. Unfortunately, this hitch is not confirmed as a fit for your 2010 Dodge Ram 1500 with the 6 foot bed. The correct B and W hitch for your 2010 Dodge Ram 1500...
view full answer... - B and W Turnoverball Gooseneck Hitch Recommendation for 2018 Ram 1500For your 2018 Ram 1500 we have the B and W Turnoverball hitch part # BWGNRK1309 as a confirmed fit. This fits all styles of your truck too: 5-1/2 Foot Bed with Air Suspension 5-1/2 Foot Bed without Air Suspension 6-1/2 Foot Bed with Air Suspension 6-1/2 Foot Bed without Air Suspension 8 Foot Bed with Air Suspension 8 Foot Bed without Air Suspension
view full answer... - Recommended Gooseneck Hitch and Wiring For a 2015 Ram 1500I recommend the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1309 for your 2015 Ram 1500. This hitch is compatible with all bed lengths and will fit with or without the air ride system. When not needed the turnoverball simply flips out of the way for a clean bed. The square receiver accepts other hitches like the 4" Offset Ball # BWGNXA4685 for additional turning clearance or B&W Companion 5th wheel hitches. There is the Slider # BWRVK3400 and Fixed # BWRVK3500 option depending...
view full answer...
Do you have a question about this Gooseneck Hitch?
Info for this part was:
Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Installed by:
Jeff D
Video by:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Jonathan Y
Updated by:
Kathleen M
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Kristina F
Updated by:
Noah M
Updated by:
Carrie F
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
David F
Test Fit:
Ryan G
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Danielle
1/12/2024
One year of having this hitch and still my favorite. Ive had zero issues with this gooseneck hitch. Great product and design. Absolutely 100 satisfied.