To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
If your vehicle's trunk lid keeps closing while you're unloading cargo, it's time to change your strut. Replace it with this custom fit gas strut and make your lid operate like new again. Quick, tool-free installation.
Features:
Specs:
Note: Always replace your struts in pairs, where applicable. Most trunk lids have a strut on each side. Failure to replace both struts can result in a warped or damaged hinge.
Gas Strut with Exceptional Stability
Most gas struts consist of a tube filled with pressurized nitrogen gas, a piston, and rod. The Atlas Lift strut, however, has a dynamic damping groove inside the tube that regulates gas movement across the piston. This ensures your trunk lid stays open when you want it open and shuts slowly without bouncing or slamming. Lastly, in contrast to struts that only have gas in the chamber, a few drops of oil have been mixed in to help seal the piston and lubricate the rod. This allows your trunk lid to move more smoothly as the rod travels in and out of the tube.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody. Andy here with etrailer.com. Let's take a real quick look at this custom fit trunk lid lift support. Now, this is going to fit your 1997 to 2000 Chrysler Sebring and on custom fit parts such as this gas strut, I do recommend taking advantage of our vehicle fit guide here at etrailer.com. Simply input the year, make, and model of your vehicle and our fit guide will confirm if this will work for you or if we have something comparable that will work for you. So this is going to replace one worn or damaged ball and socket gas strut on your Sebrings trunk's trunk lid and the dampening technology that this provides is going to give you smooth operation that's going to eliminate bouncing or jumping.
This is going to ensure frictionless movement in all weather conditions. This arm extends to hold your trunk lid open and then gently compresses while closing. The nylon ball and socket connectors that we've already been looking at are going to install directly to your existing original equipment manufacturer fittings. The nitride coated steel shaft is corrosion resistant for long lasting performance. You're going to receive just this one lift support, but it's always good to replace your struts in pairs where applicable.
Most trunk lids have a strut on each side and failure to replace both struts at the same time could possibly result in a warped or damaged hinge. And just to kind of give you an idea of the extended length here, measuring center of socket to center of socket, we're sitting pretty close to right about nine and 15/16 inches, almost 10 inches on center. That compressed length is going to be six and 9/16 inches. And this does have a limited lifetime warranty from the manufacturer. Well, that's gonna wrap up our real quick look today.
I do hope that our brief time together was helpful for you. Again, my name is Andy. Thank you for joining me.
Thanks for keeping me informed about the delay in acquiring these. They go on in about 10 seconds and are identical to original equipment.
Perfect replacement for our 2007 Lincoln MKZ trunk lifts.
Service was excellent and product was exactly what we needed. Love buying from Etrailer
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.