Hidden strobe lights install inside vehicle headlights or tail lights and provide 19 flash patterns to alert other drivers and pedestrians to the presence of your service vehicle. Combinable for synchronized flashing. Simple push-on installation.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at the hidden strobe kit with inline flashers. The push on hidden LED strobe kit with the inline flashers features six high intensity LEDs per strobe head, and they are designed to install inside a vehicle's headlight or taillight assembly. Each kit contains two light heads and cables with inline flash modules. The corrosion resistant cable with weather pack connectors are 25 feet in length. These lights feature 19 adjustable flash patterns and can be synchronized with up to eight strobes for simultaneous or alternating flashing. Now LEDs make great replacements for incandescent lights.
They last longer, they burn brighter, they're more efficient. With LEDs you don't have to worry about replacing bulbs or worry about brittle filaments. These feature the clear lensing with amber LEDs and it features a four-wire design, so your red wire is for positive power, for color activation one. Black is for ground, white is positive power for color two activation, and yellow is for synchronization and changing the flash pattern.Now to install these you will need a one-inch diameter hole and you will need to secure the unit with silicone, which is not included, or some type of approved sealant. Again, these are designed to fit in a one-inch diameter hole in this area right here.
So I measured the housing, which is kinda back to that gray portion there, all the way to the edge of the lens. inaudible 00:01:29 that's about one inch depth. Wire length is 25 feet long. We're gonna go ahead and hook it up to power; that way you can see what it looks like with some power running to it. And then we'll also turn off our overhead light so you can see it in a low light setting.
Again, this kit features 19 flash patterns, and it does have a solid design, which means all the LEDs are on.We'll just go ahead and start cycling through some of the flash patterns as I talk here. To change the flash pattern, what I'm doing is I'm taking the yellow wire and I'm just applying it to my positive power wire really quick. And every time I do that, it changes the flash pattern. You can see it's a really nice, bright design. Each light head contains six LEDs, so six LEDs per light, multi-diode design.
Really helps optimize the overall light output. Voltage is 12 to 24 volts. And the power draw at 12 volts is 1.8 amps max. I'm gonna keep cycling through some of the flash patterns here. Again, you have 19 to choose from. So you can definitely find the one that's gonna work best for your application. This type of setup is really great for construction trucks, utility vehicles, service vehicles, wide variety of applications.And they're definitely gonna get attention and increase your safety on the road, and visibility. So I'm just gonna keep cycling through, and there we are back to our flash full color with all the LEDs on. So 19 total flash patterns with this kit. That's gonna do it for today's look at the hidden strobe kit with the inline flashers.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.