Fueling multiple 35-150 gallon tanks, you need a transfer total you can log. This pump delivers 35 GPM and has a 4-digit meter that registers up to 999.9 gallons per transfer, plus a 7-digit lifetime total. Read it, reset, and keep going.
When you're filling larger tanks, slow flow turns every transfer into a bottleneck. This pump delivers 35 GPM, so you keep fuel moving on tanks from 35-150 gallons or larger. Reliable rotary vane pump technology keeps the transfer consistent instead of surging and sputtering. You finish the fill faster and get the equipment back in service.
When you're fueling multiple tanks, guessing by tank level does not cut it, and resets can wipe out the long-term number. This pump comes with a 4-digit mechanical fuel transfer meter designed to register flow rates of 6-40 gallons per minute, and it's capable of registering up to 999.9 gallons per transfer. The manual reset knob clears the 4-digit counter between fills, and lifetime volume tracking uses a 7-digit non-resettable counter that keeps total fuel moved recorded over time. You read the per-transfer total, reset it for the next fill, and still keep a running lifetime number.
Getting to the tank and then realizing the available power does not match your pump can stall the install. This pump is powered by a dual voltage 115V-230V AC motor, and it allows you the flexibility to select the voltage you need when installing the pump. It's a single pump that fits different AC power setups without swapping motors. You wire it to the voltage you've got at the tank and move on.
When multiple fuels live in the same area, a mix-up can happen fast if every nozzle looks the same. This pump includes a cast aluminum manual nozzle with a green plastic covering to indicate use for auto diesel fuel. The plastic nozzle boot attaches to the pump body, so the nozzle stays parked at the pump between fills. You walk up, grab the marked nozzle, and start dispensing without guessing which handle you're holding.
Fuel storage can carry grit and larger debris, and a pump mounted on an above-ground tank deals with daily abuse. The built-in mesh strainer filters out large particles and contaminants before they move through the pump, and the cast iron construction is built for durability to withstand the harshest environments. Add the thermal protected motor that prevents overheating, and the pump is set up for repeat use at a stationary tank with a nearby AC power source. You keep bigger junk out of the line and keep transferring fuel without the motor running hot.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.