Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
Item # 31198
Our Price: $212.18
Confirmed to Fit
2013 Toyota Land Cruiser
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (137)
- Q & A (0)
- Photos
2013 Toyota Land Cruiser - Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Front Mount Hitch
- Custom Fit Hitch
- CURT
- 2 Inch Hitch
- Square Tube
Easily attach a variety of accessories to the front of your Toyota Land Cruiser with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
- Front-mount hitch provides attachment point for hitch-mounted accessories
- Winch, spare tire carrier, snowplow, cargo carrier and more
- No more blindly backing trailer in - just hook it up and drive it forward
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Easy, bolt-on installation - no welding required
- Utilizes existing factory hardware
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over steel resists corrosion
- Sturdy, square-tube design
- Installation instructions included
- Assembled in USA
Specs:
- Line pull: 9,000 lbs
- Vertical load: 500 lbs
- Gross trailer weight: 5,000 lbs
- Receiver opening: 2" x 2"
- Pin hole diameter: 5/8"
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
31198 Curt Front-Mount Trailer Hitch Receiver
Installation Details
Front Mount Capacity
Line Pull:
9,000 lbs.
500Vertical Load:
# 500 lbs.
Tech Tip
Skid shield will be removed and may be left off or trimmed and reattached. No drilling required for installation
Complete Towing Package for 2013 Toyota Land Cruiser
Package Price:$212.18
2013 Toyota Land Cruiser Owners Who Purchased This Front Receiver Hitch Also Bought...
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Did not arrive in time
- Wrong item was ordered
- Arrived Damaged
Customer Reviews
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" - 31198
Average Customer Rating: 4.8 out of 5 stars (137 Customer Reviews)
Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.by: Paul Meudt02/01/2024
2022 Toyota RAV4
Shipping was fast and packaged good with no scratches.
I modified my 2010 Tundra skid pan for oil filter changes before mounting.
Replaced all 4 OEM tow ring bolts using anti-seize with new longer M12-1.25 X 40MM class 10.9 zinc finished hex cap screws along with new M12 X 24MM OD HARD WASHERS and torqued all 4 to 79 ft/lbs. Mounted new Thule EasyFold XT 2 Hitch Bike Rack and it fits in front without using the hitch extension.
All went together as planned and can now take E-Bikes with us while pulling our camper. We are happy campers!
by: Steve 05/07/2024
Primarily bought the front receiver hitch to haul our 2 e-bikes. Did that because it was easier than hauling them inside our camper. And didn’t trust them bouncing around on the back bumper of the camper. Hauled the bikes that way on several camping trips. Easy as pie and I could keep an eye on them the whole trip.
by: Alex183803/09/2014
2014 Toyota Tundra
I bought and installed the front hitch to my 2014 Toyota Tundra because I did not want to use my travel trailer's rear bumper. The 2014 Toyota Tundra has a skid plate that has to be removed for oil changes and this front hitch installed would also have to be removed each time the oil is changed. I decided to cut a square hole in the skid plate allowing access to the oil filter so that the skid plate along with the front hitch would not have to be removed to get to the oil filter.
The skid plate has 5 bolts and 3 screws and drops down for oil changes. To completely remove the skid plate after removing the bolts and screws you have to hold the skid plate and move it to the drivers side to unhook two hooks which are "L" shape facing the same way towards the passengers side. Do not leave the skid plate off because too many hoses and lines will be exposed and can be damaged while driving.
It took me less than 20 minutes to install the front hitch and I also bought a Hitch Extender for a 2" Trailer Hitch 7" which made the hitch come even with the front bumper on my 2014 Toyota Tundra.
I bought several other accessories to go with the front hitch which I can use when needed. I did buy this hitch mainly to use to carry my 2 beach cruiser bikes and it works perfect.
Now all I have to do is insert the bike carrier into the receiver hitch and load the bikes and I am off with no worries about the bikes being in the rear of my travel trailer or trying to keep them steady in the bed of my Tundra.
The bikes look really good in front of my Tundra and my driving view is not blocked at all with the bikes on. With the 7 inch extender the bikes are nowhere near the truck and with the Anti-rattle with lock on the 7" trailer hitch receiver there is no swaying while on the road or on the freeway at any speed. Thanks etrailer.
Mike F.
8/13/2015
Do you use any type of strap from the body of the bike rack back to the hood for stabilizing the bikes while on the road? I do not know where such a strap would be secured but I have seen some tuck them under the hood and close the hood on the end of the strap thereby securing the strap that runs from the rack under the hood lid. Does this question makes sense? Maybe such a support straps would not be required with this setup.My Tundra is a 2012 and I am assuming the skid plate is similar to yours. My bike rack looks to be much the same style as in your pics.Thanks.
Alex 8.
8/17/2015
Mike F.I dont think a strap for this type of bike rack would be needed. Even though I did use a rachet strap and made the connection from the tow hooks to the bike rack to keep it from bouncing at one time. Except for that one time I have never had to use a strap at all. Also use an Anti-Rattle Trailer Hitch Receiver Lock to keep the connection secure and tight. I make sure the bolts to the hitch and the hitch extender adapter are tighten to the fullest and the velcro straps that go around the bike tire rims are tight and secured. The hooks that go down on the bike frame are pushed down and then tighten. I have traveled throughout California with these bikes and never had a problem. Of course I always check the connections. I bought several bolts and washers for the hooks to tighten in case the bolts strips which has happened twice.Alex
Rachael H.
8/18/2015
Thanks for the follow up Alex. Please also keep in mind that using a hitch extender will reduce the capacity of the hitch by 50 percent.
Terry K.
1/29/2016
Alex- can you tell me what other parts extension, lock, etc you purchased from e-trailer for your application. I just received this unit from them. Also, how did you cut the hole for oil filter removal? Would a Dremel tool work for this? Thank you for any assistance you can provide..Thank you, Terry .
Alex1838
2/5/2016
Terry K. I also bought a Hitch Extender for a 2 Trailer Hitch 7 which made the hitch come even with the front bumper on my 2014 Toyota Tundra. I bought several other accessories to go with the front hitch which was the Anti-rattle with lock on the 7 trailer hitch receiver there is no swaying while on the road.For your question onhow did you cut the hole for oil filter removal? Would a Dremel tool work for this?I guess a dremel would work but what I used was a metal snip cutter. I bought one at home depot for about $9.00 and to start the cut I drilled a large hole at the corner of the square to be cut and then I just snipped along the square like a pair of scissors. I then filed the opening and on the square metal piece I also bought drilled several holes as I attached it to the skid plate.
by: David E.06/26/2012
2011 Toyota Tundra
bought this for my 2011 tundra, I launch my boat (5500 lbs) at a private ramp where a front mount hitch is pretty much required due to the tight access. Anyway this mounts to the front frame between the factory tow hooks on the 07-12 tundras. Does not take any time at all to install it. It weighs 29 lbs according to my scale. . It does not hang down any lower than the TRD Package steel skid plate, so I liked that. It looks plenty strong for just about any towing/launching activity I can think of with my truck.
You may need a 6-8 inch hitch extension to mound your receiver. But I would rather have to use an extension then have the hitch. itself stick out any farther forward. You may have to remove it to do an oil change, not sure yet, either way, no big deal.
Pete
10/20/2013
David or anyone!Nice writeup and photo to help us in this purchase. Can you tell me if you had to remove the hitch to complete an oil change sir? It looks like you need to remove the hitch to get the skid plate off, but wasnt sure. Thanks,Pete
David E.
10/23/2013
This front reciever will need to be removed to do an oil change. The 2 toyota dealers that have worked on my tundra did not have a problem removing it. They did not charge me any more for an oil change.
Patrick B.
7/28/2014
Remember that the hardware included with hitches is usually torque-to-yield, TTY. This means that the hardware is only meant to be torqued once. If removed, the hardware should be discarded and replaced. The instructions do specify a 4 inch hole to be cut that allows easy access for oil changes. Its at the top of the pages in an in-set diagram. Its an easier solution than removing each time and it doesnt significantly reduce the protection the shield provides.
by: Gino05/28/2023
2016 Toyota Tundra
Fit perfectly with tow hooks on my 2016 Tundra. Had my mechanic install it and cut the hole in the skid plate. The receiver is shown with the Kuat Hi/Lo hitch extender and a bike rack.
by: Kathy 02/26/2024
Toyota Tundra
We chose the Curt Front Mount Trailer Hitch Receiver so we could safely transport our RAD electric bikes while also pulling our travel trailer.
We had it professionally installed onto the front of our Toyota Tundra and it has worked out very well!
We are very pleased, and glad that we have it!
by: Kevin04/29/2024
2017 Toyota Tundra
The receiver was easy to install on my 2017 Tundra. I used a 4” hole saw to cut a hole to provide access to the oil filter. I carefully measured for the location of the hole as the drawing provided appeared to place the hole on the passenger side of the truck although the actual location is the driver’s side. Also, the instructions called for “return the tow hooks to the customer” for 2017 models, but I installed them just fine. That must have referred to a different Toyota model.
by: Bill W08/28/2016
2010 Toyota Tundra
I got this receiver for the front of my 2010 Toyota Tundra pickup truck so that I could mount a Fishin Mate beach cart on the front of the truck when my travel trailer is hooked up to the rear receiver. The Curt front receiver is all I hoped it would be. I have used it for a year now, having made one trip from my home in Virginia to Cape Cod, and another trip to Florida. For a two months stay in Florida, I used the cart on the front or rear receiver several times a week. The Curt front receiver is of the highest quality. It was simple to install. You take two bolts each out of each of the two front tow hooks mounted on the front of the frame, hold up the receiver to line up with the holes in the frame, hold up the tow hooks back to their position one at a time, and reinsert the original bolts. (Simply put, the receiver is inserted between the tow hooks and frame.). The first time I installed it, it did only take the twenty minutes or so that people say it does. I have chosen to not cut a hole in my skid plate under the engine, so when I change the crankcase oil and filter I have to remove the Curt receiver and skid plate every time. It takes some time, but I'm okay with that. It's that easy. I am 72 years old, and don't have the strength I used to have, so I can't manhandle the receiver and skid plate, but instead balance them on the cradle of a floor jack and finesse them into place. I've got the knack of it, and it goes well. I did not get a riser bar to elevate the cargo from the height of the receiver, so my cart carrier goes straight out the front. It is close to the road, but not so close as to have ever scraped going in and out of gas stations. I remain aware of it and am careful. The Curt receiver has traveled thousands of miles over a year now, has been off and back on twice for oil changes, has remained new looking, and has met all my expectations. E-Trailer, as always, remains the best internet shopping business I have ever dealt with.
by: Matt L05/03/2018
2015 Toyota Tundra
Installation was easy, even for one person (and the help of a lift). The hardest part was removing the skid plate from the Tundra. Couldn't be happier.
Matt L.
5/4/2019
It’s been perfect. Modifying the skid plate so it doesn’t have to be removed for oil changes was the best idea. The hitch makes hauling an extra cooler and fishing rods so much more convenient.
by: ArkansasTraveler06/05/2017
2016 Toyota Tundra
Purchased and installed a Curt front hitch in 2016 for my 2011 Tundra. The installation was very easy. I tow a travel trailer and use the front hitch for a bike rack.
by: Bee01/02/2020
2011 Toyota Tundra
Installing was a breeze. I used a floor jack to hold out up while screw the bolts in. Done in 15mins. Looking at other pictures I see, it looks like it was fairly low to the ground but in reality, it's not as low as the pictures make it look. I have no use for it now but future plan is front tray and maybe a plow. The finish is very nice. I cut a removable filter access in my skid plate instead of leaving a big gapping hole. It's a very nice hitch to have.
by: ‘Los08/04/2021
This is my second purchase of this product. etrailer shipment was fast and delivered ahead of scheduled. Easy fit and installation. I did modify OEM engine plate for future engine oil service.
by: Scott 10/31/2023
2007 Toyota Tundra
Great for moving airplanes with my truck! It's harder to do than a maneuverable tug that's designed for this task, but I CAN do it. I have a Cessna 310 which I can't push myself without help. Anyone with a heavy airplane should get one of these.
Fitment is perfect. Installation is really quick (10 minutes) and easy on my 2007 Toyota Tundra. It helps to have friend hold it in place when running the bolts in.
by: Robert 04/25/2024
The only thing I had to do was make the tubes
Longer for longer rods
by: Bruce04/15/2019
Simply the best way to maneuver your trailer into tight places you can see everything. Because it’s on the front end of your truck excellent product excellent quality thank you E trailer.
Bruce
4/16/2020
Works great just like advertised and it’s made in the USA !!!!
by: Louis11/16/2017
I use this hitch to tow my motorcycle carrier and motorcycle. I've gone over ten thousand miles with the bike on the hitch without a problem. It's a great easy to install product.
by: Ty01/24/2023
The hitch is great and was easy to install. My problem came when I went for an oil change.
The mechanic said he would have to remove the hitch to then remove the skid plate so he could get to the oil filter and plug.
I have not reinstalled it since then. I’ve been researching a work around like cutting a little door or hole into the skid plate to facilitate future oil changes.
Still trying to figure it out.
If you buy this hitch, keep this in mind.
Jenny N.
1/27/2023
I do know that you would want to enlarge the hole in the front skid shield to allow access to be able to change the oil filter. Were you able to take this step when installing the hitch?
Ty
1/27/2023
Not yet. Was going to ask the advice of my mechanic the next time I get the oil changed.
by: Gerral07/25/2023
Hitch feels like good quality. When I bolted it up. Holes lined up perfectly. I'll be putting the 500 lb vertical load to the test soon. Will give a update. Thanks for the great service.
by: Chris 08/13/2022
Toyota Tundra
Had my mechanic install, they had to cut a hole in my Tundra front skid plate so we could have continuous access to the oil filter. Can't remove the skid plate without removing the front hitch. Needed to get an 8 inch hitch extender to attach our Kuat bike rack. Used it several times and everything works well. Thanks, Chris.....
by: Jordan03/28/2018
2008 Toyota Tundra
Untested, thus 4 stars for the product. Fitment was perfect, although 20-45 min install goal is a bit lofty for an older truck that has been off-road and has some rust. New rig-easily achievable time windows.
etrailer gets 5 though. I liked that the shipping cost that is associated with the free shipping was applied to my expedited shipping. Shipped very quickly.
by: Robert09/24/2019
This process was quick and easy. Installing took only 15 minutes on my 2012 Toyota Tundra. The fit was exactly what I wanted.
by: Michael02/23/2018
The item arrived quickly after ordering. It was wrapped nicely and the product was well painted. It fit great and will make your front towing much easier.
by: Mr. AN05/21/2011
Fit to vehicle without problem, Fast and easy installation, Good service, Fast Shipping . We will buy again from this vendor.
by: Robert09/01/2020
Shiny hitch showed up at my door & 30 minutes later, it's installed!
by: Kenneth09/05/2017
2017 Toyota Tundra
Couldn't ask for better service, pricing and quality! Could track my order every step of the way and my front receiver hitch installed in 20 minutes that's to the instructions from the etrailer team.
I will be ordering again from etrailer!!!!!
25
137
Show More Reviews
See what our Experts say about this CURT Front Receiver Hitch
- Distance From Hitch Tube To Receiver of Draw-Tite Front Mount Hitch For 2020 Toyota TundraI was able to get the measurements you were looking for of the Draw-Tite front mount hitch that fits your 2020 Toyota Tundra, which is the following: - Draw-Tite Front Mount Trailer Hitch Receiver # 65080 The hitch is similar to the Curt # 31198 in that it measures 3-5/8 inches from the hitch pin hole to the front of the crosstube, and 6 inches from the crosstube to the front of the hitch. We haven't had a chance to install either hitch on a Tundra, but I did add some photos for you that...
view full answer...
- Recommended Front Mount Hitch for a 2010 Toyota TundraThe difference between the Curt # 31198 and the Draw-Tite # 65080 is pretty subtle. Both are rated exactly the same for tongue weight and will sit at the same level once installed, but the Draw-Tite # 65080 does sit out a little further than the Curt by about an inch. As you will be using a bike rack with this set up, the Draw-Tite # 65080 will be the better option as the bikes will have a little more clearance from the front of your vehicle. It should be noted that mounting a bike rack...
view full answer... - Dimensions for the Curt Hitch part # 31198It doesn't look like the Curt front hitch part # 31198 would fit your 2001 LX470. The measurements of this hitch are 38-7/8 inches from side to side, 2 inches from front to back 1-7/8 inches from the mounting flange to the cross tube.
view full answer...
- 2021 Toyota Sequoia Front Mount Hitch and Bike Rack Recommendation for e-BikeYes, you can use any of the 2" hitch mount bike racks once you install a front mount hitch on your 2021 Toyota Sequoia. I recommend checking out the Curt # 31198 because the Curt hitches tend to have a thicker powder coat so it will hold up to the elements better. For a bike rack I recommend checking out the RockyMounts HighNoon FC Solo Bike Rack for 1 Bike # RKY87RR because it's a 1-bike rack that can hold up to a 60 lb bike with a 5" wide tire. Unlike other wheel-mount racks, this rack...
view full answer...
- 2018 Toyota Tundra with Skid Plate Front Hitch RecommendationFor your 2018 Toyota Tundra the recommended front hitch is the part # 31198 for use with the Agri-Cover SnowSport plow part A40000HD. You will need to enlarge a hole in the skid plate to allow the install of this hitch while also allowing easy access to the oil filter. If you check out the install video I attached for this hitch you'll see how to do this. I also attached a picture of a diagram that shows where the 4 inch hole needs to be.
view full answer...
- Front Hitch Installation On A 2022 Toyota Tundra If your 2022 Toyota Tundra does not have tow hooks then don't worry about that part of the instructions. If you had tow hooks they would be removed to install the front mount hitch and then reattached. When installing the front mount hitch you will have to cut a 4 inch diameter hole on the skid shield to be able to install the Draw-Tite front hitch # 65080. I attached a diagram below of where to cut.
view full answer...
- Front-Mount Hitch Installation on 2003 Toyota 4Runner Most of the hitches we sell are custom-fit items, meaning that they are designed and intended for only specific vehicles, meaning certain makes, model years and styles. Although we do offer multi-fit hitches for RVs the hitches we have for vehicles like your 2003 Toyota 4Runner are custom-fit. We do not show a fit for a front hitch for your vehicle. I checked directly with both Curt and Draw-Tite, our two main hitch suppliers, and neither offers a front-mount hitch for your vehicle. Your...
view full answer... - Does Skid Shield have to be Removed for a Front Hitch on a 2018 Toyota TundraOn the Curt front mount receiver # 31198 there is a note stating that the skid shield will either have to be removed or you can trim it and reinstall in on your 2018 Toyota Tundra. For the Draw-Tite receiver # 65080 we have a note stating that the skid shield must be removed but nothing about being able to reinstall it. Some customers have noted that they had to make or enlarge a hole on a bottom panel in order to be able to change the oil. You may also consider using the Bike Bunk,...
view full answer... - Will Front Hitch Need to be Removed for Maintenance on 2017 Toyota TundraNo you will not have to remove the Curt Front Mount Trailer Hitch # 31198 from your 2017 Toyota Tundra to do maintenance. The only thing you need to do is enlarge the access hole to 4" - as shown in the linked installation instructions - to allow for oil filter changing.
view full answer... - Does Curt Front Mount Hitch and 2014 Toyota Tundra Skid Shield have to be Removed to Change OilA customer who bought Curt front mount hitch, # 31198, for his 2014 Toyota Tundra did say the following: "The 2014 Toyota Tundra has a skid plate that has to be removed for oil changes and this front hitch installed would also have to be removed each time the oil is changed. I decided to cut a square hole in the skid plate allowing access to the oil filter so that the skid plate along with the front hitch would not have to be removed to get to the oil filter." The full review is available...
view full answer... - Comparing Curt and Draw Tite Front Hitches for 2018 Toyota TundraFor your 2018 Toyota Tundra we have the Curt front hitch part # 31198 and the Draw Tite part # 65080 both as a confirmed fit and both really good options. Both install the exact same and have same capacities, but I like the Curt better as it's made in the USA and the Draw Tite is not. I attached a picture that shows the hitch installed for you to check out as well.
view full answer...
- Will The Curt Front Hitch Work With Motorcycle On 2012 Toyota TundraThe Curt Front Mount Trailer Hitch Receiver part # 31198 which is a bolt-on fit for a 2012 Toyota Tundra will work well for a motorcycle and carrier. The trailer hitch has a 500 lb vertical load rating so as long as the weight of the motorcycle and carrier does not exceed this you will be good to go. The etrailer Motorcycle Carrier w/ Ramp for 2" Hitch part # e98873 which only weighs 58 lbs is what I recommend you use if you don't already have an option in mind. In regards to legality,...
view full answer... - How To Mount A Bike Rack On A 2016 Toyota Land Cruiser Without A Rear HitchI have a solution for you, however, there are not any 4 bike carriers available to fit the trunk of your 2016 Toyota Land Cruiser Prado. If you can remove your spare tire from the trunk of your vehicle, then I recommend going with Malone Hanger 3 Bike Rack - Trunk Mount - Adjustable Arms # MPG2139. This is a 3 bike rack that mounts to the trunk of most SUV's, but likely will not work with the spare tire in place. To mount your 4th bike, you could use a roof-mounted 1 bike carrier such...
view full answer... - Hitch Extension OptionsWe have the Yakima StraightShot Hitch Extension, # Y69VR and the RockyMounts Hitch Extender, # RKY10008, among others. The problem however is that most manufacturers state these type products are not to be used with accessories on RV hitches. The amount of sway the back of many RV's receive can cause a lot of torque to be placed on the hitch. There are other similar items such as these two but be aware of the recommendation to not use on an RV. Your best bet is to consider shifting how...
view full answer... - Front Hitch and Winch Mount Recommendation for a 2008 Toyota SequoiaYou would need to have a front hitch installed on your 2008 Toyota Sequoia for installing a winch. For that we have the Curt hitch part # 31198 that is a confirmed fit. Then for a mounting plate for the winch you would want the part # C31010 which would fit with the Superwinch part # SW1695201 that you referenced.
view full answer... - Bike Rack Options for a 2007 Toyota Tundra Towing an A-Frame Travel TrailerI have a couple of ideas that might work for you. First, take a look at the CURT Multipurpose Ball Mount, # D210. What this is going to do is allow you to put a bike rack in the top receiver and tow a trailer with the ball mount part. The receiver part measures 4-3/4 inches from the top of the shank to the bottom of the receiver. This may be enough to hold the bikes above the items on the trailer frame, especially if that bike rack also has a rise in the shank. The multipurpose ball mount...
view full answer... - Recommended Front Mount Hitch for a 2015 Toyota Tundra and a Bike Rack for Voyager Radius E-bikesThe Thule EasyFold XT Bike Rack for 2 Electric Bikes item # TH903202 is still the best bike rack to use with your two Voyager Radius E-bikes and it's one of the few that is rated to be used on a front hitch. The padded clamps will secure your bikes by the downtubes or top tubes. The EasyFold has a 65 lbs per bike capacity. Due to the odd shape of your bikes, their weight, and the limited amount of options for bike racks capable of being used on front hitches the EasyFold XT item # TH903202...
view full answer... - Comparing Curt and Draw-tite Front Hitch for 2019 Toyota TundraThe biggest difference between the Curt front hitch part # 31198 and Draw-tite front hitch part # 65080 is that the Draw-tite receiver tube extends out more than the Curt by over an inch. This makes it more visible when nothing is mounted to it. However, it can also help with clearance. When putting an accessory in the hitch there is less of a chance of it coming in contact with the front of your Tundra. Other than that, they aren't much different from each other. They have the same...
view full answer... - How to Mount Accessories in the Curt Front Mount Hitch # 31198 on a 2011 Toyota TundraIf the receiver tube is recessed too far on your 2011 Toyota Tundra for your accessories, a hitch extender, see link, can be used if you stay within 50 percent of the weight capacity of the hitch and the vehicle frame capacity for the front mount hitch. Extenders reduce the capacity of the lowest rated item by 50 percent because of the extra torque that can be applied by the longer shank in the hitch. If you need to purchase accessories, your best bet is to measure from the center of the...
view full answer... - Comparison of Curt and Draw-Tite Front Mount Trailer Hitch Receviers for 2008 Toyota TundraWe have two front mount hitches that are confirmed to fit your 2008 Toyota Tundra. The Curt 31198 and the Draw-Tite # 65080. They do have identical specs since they both have a 9,000 pound line pull and 500 pound vertical load. Both have a 2 inch recevier opening. Both bolt to your Tundra's frame and do not require any drilling. The largest difference is going to be the appearance once either is installed. The receiver tube of the Draw-Tite protrudes further forward than the Curt...
view full answer... - Comparing Front Mounted Hitch Receiver for 2008 Toyota TundraThe Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2" # 65080 is my recommendation for you based on cost and features. The installation of this hitch is nearly identical to the Curt # 31198. The Draw-Tite has a measurement of 7-1/2 inches from the crossbar to the end of the receiver tube. The Curt receiver has a measurement of 4-5/8 inches from the crossbar to the end of the receiver tube. The weight ratings of the hitches are identical, so the 2-7/8 inch difference in...
view full answer... - Can You Use The Curt High-Low Adapter As A Winch Mounting Point?Technically you could use the Curt High-Low Adapter # C27KR with a winch, however no more than 400-lbs of downward force can be applied to this adapter. Since line pull of the winch isn't always straight on the receiver, it isn't recommended for this application. Realistically, this adapter should only be used for flat towing situations. Instead, I recommend installing the Curt Front Mount Trailer Hitch Receiver # 31198 like you mention, but use the Front Mount Trailer Hitch Receiver Winch...
view full answer... - Will the Curt Front Mount Trailer Hitch Receiver work with a Thule Double Track Bike rack?The Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" # 31198 is a confirmed fit for your 2016 Tundra Crewmax SR5 with TRD Off Road package. Skid shield, if present, will be removed to create a four inch hole for oil filter access, and reattached, or may be left off. This front mounted hitch receiver will work with some bike racks but due to the large recess to the hitch pin hole an extension like # e88YR. With the extender the Thule Double Track # TH92BJ will work well. When...
view full answer... - Fit and Compatibility of Curt Front-Mount Hitch 31198 on 2011 Toyota TundraYes indeed, the Curt front-mount 2-inch hitch # 31198 is a confirmed fit on your 2011 Toyota Tundra SR5. The hitch installs without drilling and includes all required mounting hardware. The complete installation instructions are linked for you.
view full answer...
Do you have a question about this Front Receiver Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Brandon M
Expert Research:
Adam R
Written by:
Lindsey S
Video Edited:
Joshua S
Video Edited:
Jacob T
Test Fit:
Randy B
Test Fit:
Shane H
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Matthew E
Updated by:
Isabelle B
Video by:
Zach D
Video by:
Jonathan Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina D.
2/2/2024
Thats so great to hear! Give us some updates on your next trip!