Bike Rack Options for a 2007 Toyota Tundra Towing an A-Frame Travel Trailer
Updated 09/13/2011 | Published 09/12/2011 >
Products Featured in This Question
Question:
We would like to mount a bike rack on the tongue of our travel trailer above the propane tanks and battery boxes. The A-frame is 5 C-channel. We have seen various homemade fabricated and extremely expensive retail versions. None that are doable for us. I am trying to figure out how to mount a receiver to the tongue to get the angles right and the bikes centered. With the tongue A-frame sides at an angle to eachother, the receiver, bolted on vertically instead of horizontally, would be rotated, and of course, not centered on the trailer. Perhaps 2 receivers opposite eachother and a bike rack modification? Any ideas would be appreciated.
asked by: Esther D
Expert Reply:
I have a couple of ideas that might work for you. First, take a look at the CURT Multipurpose Ball Mount, # D210. What this is going to do is allow you to put a bike rack in the top receiver and tow a trailer with the ball mount part. The receiver part measures 4-3/4 inches from the top of the shank to the bottom of the receiver. This may be enough to hold the bikes above the items on the trailer frame, especially if that bike rack also has a rise in the shank.
The multipurpose ball mount has a tongue weight capacity of 750 pounds and 7,500 pound gross trailer weight capacity. The weight of the bike rack, bikes, and trailer tongue weight all count against the tongue weight capacity. The receiver portion of this ball mount is limited to 350 pounds.
Another option is to install a front mount trailer hitch and use it for a bike rack. There are a couple of front mount hitches that will fit a 2007 Toyota Tundra. The most economical is the CURT Front Mount Receiver, # 31198. I have included a link to the installation details for you.
Last, you may be able to use some of our hitch fabrication parts, linked for you, to fabricate mounts that will fit on your trailer the way you want. Any welding should be done by a qualified professional. Please note that bike rack are not really designed for this application and you may void the warranty. I would at least use a bike rack rated for use on a trailer, see link, if you decide to go this route.
Product Page this Question was Asked From
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Front Receiver Hitch
- Visible Cross Tube
- 500 lbs Vert Load
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Front Mounted Trailer Hitch Receiver For 2021 Toyota Tundra
- Q&A: Front Hitch Installation On A 2022 Toyota Tundra
- Q&A: Comparison of Curt and Draw-Tite Front Mount Trailer Hitch Receviers for 2008 Toyota Tundra
- Q&A: Will Front Mounted Receiver Hitch on 2013 Toyota Tundra Need to Be Removed to Change Oil
- Q&A: Recommended Hitch for a 2025 Subaru Crosstrek Premium
- Q&A: Comparing Front Mounted Hitch Receiver for 2008 Toyota Tundra
- Q&A: Comparing Curt and Draw Tite Front Hitches for 2018 Toyota Tundra
- Article: Trailer Wiring Diagrams
- Article: How to Choose the Right Trailer Hitch Class
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Types of Trailer Hitches: How and Why to Use Each
- Article: My Trailer Hitch Doesn't Fit
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: Snow Tire Chain Overview: How to Buy the Right Tire Chains

