Is Sealant Tape Needed to Install the Derale Engine Oil Cooler # D15602?
Updated 06/21/2022 | Published 06/18/2022
Products Featured in This Question
Question:
Do I need to use Teflon tape on the threads of this oil cooler kit I bought?
asked by: Michael P
0
Expert Reply:
Yes. According to the installation instructions, you need to use the included thread sealant tape to install the two 3/8” NPT x 1/2” hose barbs into the sandwich adapter of the Derale Engine Oil Cooler # D15602. If you need sealant tape, I recommend using the # 37207-30025. This tape is approved for use of temperatures between -450 F to 500 F.
expert reply by:
Bob C
0
Product Page this Question was Asked From
Derale Stacked-Plate Engine Oil Cooler Kit w/ Sandwich Adapter (Multiple Threads) - Class III
- Engine Oil Coolers
- Stacked-Plate Cooler
- W/ Sandwich Adapter
- Class III
- 13W x 4-9/16T x 2D Inch
- With - 8 AN Inlets
- Derale
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Replacement Prop Rod Assembly & Clips For Leer HF350M Tonneau on 2020 Toyota Tacoma
- Q&A: Trailer Hitch and Wiring for a 2017 Ford Flex
- Q&A: Parts Needed to Add a Towing Package to a 2016 Ford Flex
- Q&A: Engine Oil Cooler for a 2015 RAM 1500 with 5.7L Motor
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Where is Brake Controller Install Port on 2016 Honda Pilot
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: How to Measure 5 on 5" Bolt Pattern for Fitment of Provider ST205/75R15 Tire on White Wheel
- Q&A: 2011 FJ Cruiser Transmission Cooler Recommendation
- Article: My Trailer Hitch Doesn't Fit