Loose straps, cords, bags, and tools quickly clutter trailer floors and workspaces. This rounded J-hook snaps into the track with a spring-loaded lever, giving your gear a movable hanging point that shifts as your storage layout changes.
Straps, cords, bags, and tools can take up floor or shelf space when they could be hanging along your trailer or workshop wall. The rounded J-hook snaps into Snap-Loc or E-track with a spring-loaded lever and moves from one opening to another. Your hanging storage can shift with your gear instead of staying fixed in one spot.
The 4-3/8" inside hook opening gives your gear room to sit inside the rounded hanger. Add a second hook or more (sold separately) when your ladder, weed trimmer, or other long item needs support at multiple points. You can space the hooks along your E-track to support the item where it needs to rest.
Tie-down anchors must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the anchors being used. For example, if you are using anchors with a WLL of 100 lbs each to tie down a load weighing 400 lbs, then you need at least 4 anchors to safely secure that load. It is recommended that you always use anchors in pairs.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everyone. Steve here with etrailer. Let's take a look at our Snap-Loc E-track multipurpose J-hook. Now we consider this a four inch hook and that's basically the inside span here. Keep in mind when they make these in production, this curl could get a little closer, a little farther away. This one I'm getting about 4 3/8 inches on the inside.
So this is a rounded J-hook. You can use this to hang multiple things. This side obviously attaches into your E-track. It's attached here. I can hang air hoses.
I can hang. I've seen customers, neighbors put a wheel and tire on here if it's small to go on here. I've seen them hang cords, extension cords, hoses, all kinds of gear. And the fact that you can just put everything you want and then move it along the E-track track that you have installed on your wall makes it very versatile, very quick and easy to use. Now this has a maximum load or brake strength of 700 pounds, but it has a working load limit of 400 pounds and they've got that stamped right in here on the metal itself as well.
So working load limit, 400 pounds, maximum load strength, 700. Well folks, that's going to wrap up our quick look together at this J-hook. I'm Steve with etrailer. Thanks for watching.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.