T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Item # 118425
Retail:$48.59
Our Price: $35.72
You Save: 26%
Confirmed to Fit
2012 Jeep Grand Cherokee
without factory tow package
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Orders above $99 qualify for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (363)
- Q & A (0)
- Photos
2012 Jeep Grand Cherokee - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Trailer Hitch Wiring
- 4 Flat
- No Converter
- Tekonsha
Quickly and easily install a 4-way trailer connector on your Jeep Grand Cherokee with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Connects quickly and easily - no cutting or splicing of wires
- Locate connection points behind tail lights
- Plug in T-connector
- Constructed of 16-gauge bonded wire
- Comes with dust cap for 4-way flat connector
Specs:
- Maximum amperage: 7.5 amps per circuit
- 1-Year limited warranty
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies to access this harness. If extra length is needed, you can cut the zip tie on the passenger side harness.
Once installation is complete, the 4-way flat connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
118425 Tow Ready T-1 T-Connector - 4 Wire
Installation Details
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118425
Average Customer Rating: 4.7 out of 5 stars (363 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required.by: Jacob 05/11/2023
Great service, products works great. Had to remove 1 zip tie to gain the length needed to get to both tail lights. Follow the path of the vehicle wiring and the wiring tucks nicely.
by: Tom 12/29/2023
The wring harness was very easy to install. It is working just fine after one year. I was careful upon installation to make sure no wires would hang down creating an opportunity to get snagged. We hunt with our vehicles so often time we will be in a harvested field driving.
by: Peter M11/10/2016
2012JeepGrand Cherokee
Perfect product and transaction all around!! Other reviews said wiring was a bit short but cutting a zip tie would help wire length. Worked perfectly. Install was a breeze and went just as smooth as the video provided for my Jeep. Also bought the trailer hitch as well. Installing both took less than 30 mins. If, like me, you were worried about quality because the price is so low. Worry not!!! The quality is there. The inflated price is not. Welds on hitch are good and powder coating is flawless. Wiring is plug and play. (pun intended) If your thinking about buying. STOP. Just buy it and you will be as pleased as I was. ~2012 Jeep Grand Cherokee~
by: Paul07/15/2022
2011 JeepGrand Cherokee
Very dissatisfied with the wiring harness. Way too short. A number of your reviews indicated that this. We had to splice a number of wires. Your solution was to cut the small zip ties on the wires. We did that. Still too short. Probably will not use this product again.`
by: Alan06/16/2018
2012JeepGrand Cherokee
I ordered this harness for my Grand Cherokee and couldn't be happier. It came within a few days choosing economy shipping and the installation was ridiculously easy. There is even an online video with step by step instructions for this exact product. I completed the install myself in under 30 minutes. Did a brake/signal check and everything worked perfectly. Great product, great service. Very happy with this purchase.
by: Tom01/03/2020
2009 JeepGrand Cherokee
This is GREAT !
everything including wiring harness was a perfect fit. It took me 1 hour and 15 min start to finish for install.
Well done Etrailer
by: Jeffrey 05/27/2023
JeepGrand Cherokee
It was super easy to install this trailer light setup on my Jeep Grand Cherokee. Works perfectly and have had no issues with it.
by: Tim R.07/10/2013
2009 JeepGrand Cherokee
Everything fit as it should. The connectors could be a bit more sturdier. Very delicate plastic.
by: Bradley A06/07/2018
2010 JeepGrand Cherokee
Wiring harness was so easy to install, it took me less then 30 minutes to get it installed! Way cheaper then uhaul charges! Very happy.
by: Hugh Baugus03/25/2017
2007 JeepGrand Cherokee
Product was super easy to install I've sent a pic of the hitch installed my Jeep is a work in progress thank you for a great product.
Hugh
Hugh B.
3/25/2018
awesome love it!!!
by: Michael11/04/2022
unit did not fit had to add wire so it would reach from tail light to the other. And this was the second harness I ordered the first one was totally wrong
Jenny N.
11/8/2022
It can seem like that there is not enough wire in the harness. To get enough length, all you need to do is cut the zip-tie that holds the two halves together. Peel the bonded wire apart till you get enough length, then you can tie them back with a new zip-tie.
by: Layne01/27/2024
came 3 days early
by: Kevin 10/04/2023
Easy to install and works great on my j eep
by: Brandon06/03/2018
Jeep
Buying from etrailer was very easy and got my order very quick. Website helped ensure that hitch and wiring fit my Jeep. The hitch looks really good and installation was simple. Definitely recommend etrailer!
by: Don D.04/23/2017
Hello Mr. George J (etrailer.com):
My experience with etrailer.com was GREAT!!! I purchased a Draw-Tite Trailer Hitch Receiver, T-One Wiring Harness and Four Pole Bracket. Your website, instructions, sales, and shipping were Top Shelf!!!
Many thanks for the GREAT Service!!!!!!!!!!!!!
Sincerely,
Don D.
Waterford, Connecticut
Don D.
4/25/2018
Hope all is well with you and your team at etrailer!!! The three trailer items I purchased from your company are working GREAT!!! The items are of very good quality and they were priced appropriately. Also, thank you for continuing to send me product updates. Very helpful!!! Thanks for the Great Service!!!
by: Max07/31/2017
2011 JeepGrand Cherokee
The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Item # 118425 came exactly as advertised and installed exactly as shown in the instructional video. Great product, fast service and delivery, liked the email updates on shipping and delivery...
Max
7/31/2018
There has been no issues with the product...still working exactly as it did on the first day.
by: Austin G03/09/2017
2010 JeepGrand Cherokee
The delivery was fast, took it less than a week to come in. This product was so easy to install. It took me an hour to put the hitch and wiring harness in my 2010 Jeep Grand Cherokee. I haven't got to pull anything with it yet but as of right now I think it's a good product.
by: Todd S.03/17/2014
Honda Pilot
Easy to install, works great. Suggestion: watch the video rather than use the included instructions, if possible. The instructions are fine, but the video shows where to route the wires through the bumper. After reading the suggestions in the reviews, I snipped one of the wire ties holding the two cable sets together to make sure I had enough cable length to stretch over to the passenger side. Make sure you have a couple of coat hangers or heavy wire to fish the wires through your bumper pipe. Even though person in the video was able to install the ground screw without drilling a pilot hole, I was not able to, so I needed to drill a pilot hole to get it started.
Todd S.
3/15/2015
The harness works great. I upgraded it to a round 7-wire harness with electric brakes. No need to discard this kit, it simply powers the lights while a new wire powers the brakes on the new 7-wire connector.
by: Andre F05/12/2015
2007 JeepGrand Cherokee
Good product with quality connections. My only negative comment is that the wiring could be about 2"-4" longer for my application (2007 Grand Cherokee). The wires were just too short in overall length and made the installation longer than it needed to be. I did get it in, but almost had to remove the rear bumper to make everything fit perfectly. All in the harness works great - install was just a pain as things were tight.
Andre F.
5/11/2016
Works fine - Couldve been 4 longer so it would give a smidge of slack. Pain to install
by: Lanier06/21/2019
Have Jeep Grand Cherokee and have added an etrailer hitch. This wiring harness will complete the project allowing use of utility trailer. Like the fact that no wiring has to be cut or tapped to install. Perfect for my use.
Lanier
6/22/2020
Still works exactly as expected. Usage down during Covid-19 situation.
by: Kyle01/14/2013
2012JeepGrand Cherokee
The product is very easy to install. For those with comments about the wires being too short to get to the passenger side, all you have to do is cut a zip tie on the harness and there is more than enough wire supplied. Installation took about 30 minutes and the video on the website is excellent. The shipping and notification procedures with e-trailer are great. It's a pleasure doing business with them.
Kyle
7/15/2014
Product is holding up very well. No issues whatsoever. Excellent all the way around. Would recommend without hesitation.
by: Larry06/13/2011
2011 JeepGrand Cherokee
The product quality is excellent, BUT the 2011 model year JEEP GC has changed. The wiring harness is to short! I had to add additonal wiring by cutting and splicing additional length.
This product needs to be upgraded to fit 2011 Jeep Grand Cherokee.
Patrick B.
11/21/2012
To get enough length, all you need to do is cut the zip-tie that holds the two halves together. Peel the bonded wire apart till you get enough length, then you can tie them back with a new zip-tie.
by: Mike05/30/2016
2007 Jeep Grand-Cherokee
This was really easy to install, especially if you watch the video before installing. I chose to follow wiring that was already going across above the spare tire and tie wrapped to it. It tucks neatly away and I had plenty of wire. I do recommend cutting one of the existing ties to allow more cable.
Mike
1/23/2018
Product has been great no issues to date!
by: Richard Snipes09/15/2017
2011 JeepGrand Cherokee
Found your website and thought it was awesome. Boy was i wrong. I ordered a wiring harness for my 2011 Jeep Grand Cherokee. Watched the video and it seems very simple and well thought out. Paid 25 dollars extra for overnight shipping so i could leave town for the weekend. Evidently Tekonsha ( supplier) doesnt know how to measure because the harness is too short. Customer service is a joke. She says someone may call me tomorrow. What good does that do. Im stuck and cant do the work i promised. Thanks etrailer. You suck.
Laura E.
9/19/2017
Richard, if you snip one of the zip ties where the yellow and green wires meet, you can make the wiring just about as long as you need.
by: Frannie Freitas05/30/2016
2011 JeepGrand Cherokee
It works grate very easy to hook up grate instructions I would recommend this product to anyone who needed a trailer hook up wire set. Order arrived ontime.very ?? happy with this product
David F.
5/30/2017
Grate no problems
25
363
Show More Reviews
See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring
- Which Powered Converter Vehicle Wiring Harness Can Be Used on a 2007 Jeep Grand CherokeeFor your 2007 Jeep Grand Cherokee, there is a possibility that the camper with all the lights could pull too much electricity for the 118425 custom wiring and your vehicles electrical system. Instead, I recommend using the Upgraded Circuit Protected Modulite with 4 Pole Harness and Hardwire Kit - Includes Testers, # 118425. With this harness, you will have a circuit protected powered modulite that has a connection directly to the vehicles battery. This will allow enough power for the...
view full answer... - Does 2013 Jeep Grand Cherokee Need Re-Flashed After 7- and 4-Pole Trailer Connector Socket InstallIn regards to the 7- and 4-Pole Trailer Connector Socket part # HM40975 which is a fit for a 2013 Jeep Grand Cherokee, it's just simply a trailer connector that plugs into an existing port on the vehicle. If the pins inside the connector are not active once you plug it in, I would first be sure to check the towing fuses for the vehicle in the engine bay fuse box which I have listed for you below. J03 - 30 Amp Pink - Trailer Tow J14 - 20 Amp Blue - Trailer Tow Lamps/Park Lamps If the fuses...
view full answer... - Parts Needed To Tow a Trailer With a 2013 Jeep Grand CherokeeI do have everything you need to setup a 2013 Jeep Grand Cherokee for towing though there is not an all inclusive kit. In regards to the trailer hitch, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75699 because of the hidden crosstube design. It has a class III rating which is the highest available. For the trailer wiring, I recommend the T-One Vehicle Wiring Harness part # 118425 which is plug-in-play. For a ball mount/hitch ball, I recommend the etrailer Ball Mount...
view full answer... - What is the Difference Between CURT Class III Trailer Hitches for a 2011 Jeep Grand CherokeeThe main difference between CURT Trailer Hitch C13075 and # C13065, is the cross tube. On C13075, it has a round tube and the receiver extends straight out from the side of the tube. This requires a bend in the cross tube which makes more of the hitch visible beneath the vehicle. Hitch # C13065 has a square cross tube. The receiver is welded to the bottom of the square tube and this makes only the receiver visible beneath the rear of the vehicle. The rest of the hitch is hidden behind...
view full answer... - Parts Needed to Tow Trailer with 2010 Jeep Grand Cherokee Laredo w/o Tow PackageFirst thing you'll need is a trailer hitch for your 2010 Jeep Grand Cherokee Laredo like the Draw Tite # 75338 which installs easily and has plenty of towing capacity. Then for trailer wiring you'd want the part # 118425 which is an easy install and doesn't require any splicing. If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop....
view full answer... - Will Curt Trailer Hitch # C13065 Fit a 2012 Jeep Grand Cherokee with Tow HooksThe Curt trailer hitch instructions for # C13065, see link, do mention that if there are factory tow loops present they have to be removed prior to hitch installation. So this hitch will fit with or without the tow hooks present on the vehicle. I have also included a link to a video showing a typical installation. If you plan on doing some towing I recommend the etrailer ball mount kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin and clip, and a carrying bag. For trailer...
view full answer... - Tow Ready Custom Fit Vehicle Wiring Harness for 2014 Jeep Grand CherokeeMy contact at TowReady advises that harness # 118425 will not work on the 2014 model year due to the new tail lights but suitable harness options can be seen on the linked page. All are intended for vehicles that have the factory tow package. You can choose 4-pole or 5-pole flat type connectors or a round RV-style 7-way/4-pole combination like # HM40975 which is illustrated in the linked video.
view full answer... - Recommended Trailer Hitch Receiver and Wiring for 2013 Jeep Grand Cherokee LaredoThe Draw-Tite Max-Frame Trailer Hitch Receiver # 75699 is a confirmed fit for your 2013 Jeep Grand Cherokee Laredo. For your wiring, you will want the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118425. If you want a 7-way, then you will also want to add the # ETBC7 so you can get the other functions. This will require a brake controller like # 90195 for complete functions. Then for a ball mount, I recommend the Curt Channel Style Adjustable Ball Mount # C45900....
view full answer... - Trailer Hitch Recommendation for a 2007 Jeep Commander Rocky Mountain EditionI spoke with my contact at Draw-Tite about Trailer Hitch # 36362. He stated that there are no known fit problems with this hitch and the Jeep Commander Rocky Mountain Edition. He also added that they have not received any calls about the hitch not fitting. So the # 36362 hitch will fit your Grand Cherokee. I have included a link to the installation details to the right. The hitch comes with the necessary hardware for installation. If you plan on doing some towing the recommended ball...
view full answer... - How to Iinstall a Brake Controller on a 2011 Jeep Grand Cherokee OverlandTo install a brake controller on the 2011 Jeep Grand Cherokee you will most likely have to hard wire. From the information I was able to obtain there is a brake controller connection point, but the connector is not available aftermarket. If a connector is supplied, it will be in one of two locations. The first is under the dash just to the left of the steering column. The second is behind the driver's side kick panel next to the emergency brake pedal. If you find the connector you will...
view full answer... - Aftermarket Trailer Hitch and Trailer Wiring Installation on a 2007 Jeep Grand CherokeeThe trailer hitches we sell for your 2007 Jeep Grand Cherokee do not require that the rear bumper be removed but the rear fascia does need to be detached so it can be moved out of the way to make room for hitch installation. If your Grand Cherokee has the factory tow hook, it must be permanently removed. To do so, you would have to temporarily remove the rear fascia and a plastic bumper support. The fascia and support get reinstalled near the end of the installation. I have included a...
view full answer... - Is There A Video Of The Installation Of A Trailer Hitch And Wiring On A 2007 Jeep Grand CherokeeI have a video of the Draw-Tite Class III Hitch, # 75338 being installed on a 2007 Jeep Grand Cherokee. The video shows it being installed on a Jeep without a tow hook, so if your Jeep has a tow hook it would have to be permanently removed which adds 20 to 90 minutes to the installation time. I also have a video of the Tow Ready T-One Wiring Harness, # 118425, being installed on a 2007 Jeep Laredo. Even though the vehicle is different, the procedure will be very similar and you can...
view full answer... - Recommended Trailer Hitch and Wiring for 2013 Jeep Grand Cherokee LaredoWe have everything you need to set your 2013 Jeep Grand Cherokee up for towing. Starting with the trailer hitch, I recommend going with the Draw-Tite Class III Max Frame Receiver Hitch # 75699. This hitch is going to sit slightly further back from the rear bumper than the Curt model, making it a bit more hidden once installed. It will provide a 2 inch receiver opening and a 5,000 pound towing weight capacity, although you will still want to check the capacity of your Grand Cherokee as...
view full answer... - Trailer Hitch and Wiring Recommendation for 2012 Jeep Grand CherokeeFor a hitch for your 2012 Jeep Grand Cherokee the Draw Tite hitch part # 75699 that you referenced would be exactly what you would need. To install a 4-way all you need is the part # 118425. Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way. If you do have trailer brakes you would need the # ETBC7 instead of the # 37185 and a brake controller. This kit comes with everything needed to wire up the 7-way and install...
view full answer... - How Does Tow Ready T-Connector Harness 118425 Install on a 2009 Jeep Grand CherokeeThis harness connects to the connectors on the back side of the tail lights. I have added a link to the instructions below as well as a video of this kit being installed on a 2007 model. They should give you a pretty clear idea as to how the harness installs.
view full answer... - Trailer Wiring Harness Recommendation for 2007 Jeep Grand CherokeeFor trailer wiring confirmed as a fit for your 2007 Jeep Grand Cherokee we have the Tekonsha kit part # 118425 which is going to fit and work great. I attached an install video for this kit on a 2007 Grand Cherokee for you to check out as well.
view full answer... - Comparing Curt and Tow Ready Trailer Wiring for a 2013 Jeep Grand Cherokee without Tow PackageBoth the Tow Ready harness # 118425 and the Curt harness # C56009 install and function the same way on your 2013 Jeep Grand Cherokee without the factory tow package. They are just from 2 different manufacturers. I have linked videos showing example installations of both for you. I usually recommend Tow Ready over Curt because on harnesses with converter boxes the Tow Ready ones seem to be the more reliable option. But in this case there are no converter boxes so you could go either way...
view full answer... - Does a Factory Installed 7-Way on a 2007 Jeep Grand Cherokee Require a Fuse or Relay to ActivateIf your 2007 Jeep Grand Cherokee came with a factory installed 7-Way wiring harness, it probably does have the 12-volt wire already attached and ready for use. You can check the pin on the 7-Way in the 1 oclock position if facing the connector. Use a circuit tester like # PTW2993 to check for voltage. On some vehicles you will need to have the key on, or the vehicle started. If you find that it does not show voltage, it could be that there is a fuse or relay that needs to be installed....
view full answer... - Recommended Trailer Hitch And Wiring For 2008 Jeep Grand CherokeeThe trailer hitch I recommend for your 2008 Grand Cherokee is the Curt Trailer Hitch # 13251. This is a Class lll hitch and it has a 2-inch receiver opening. I have attached a link to an installation video of this hitch on a 2008 Grand Cherokee you can check out. As you can see in the video, the receiver is below the bumper. The bumper on the vehicle in the video does not have a relief as you mentioned. If you plan on doing some towing you might be interested in etrailer ball mount kit...
view full answer... - Wiring is Too Short Installing Tow Ready T-One Harness on a 2012 Jeep Grand CherokeeThere is an installation note right below the specs on the product page of the Tow Ready # 118425 that notes if you need extra length, you can cut the zip tie on the passenger side harness. I have found by researching the previous customers installation experiences, many of them with your vehicle, have had to use this method to gain that extra little bit of wire to finish the installation. In the picture, I have designated the ziptie in question.
view full answer...
- Recommended Wiring Harness and Trailer Hitch for 2013 Jeep Grand CherokeeWe do offer custom fit trailer wiring harnesses for your 2013 Jeep Grand Cherokee. Since you are also looking for a trailer hitch, such as the Curt Class III Receiver # C13182 that you referenced, it is likely that your Grand Cherokee does not have a factory towing package installed. In this case, I recommend the Tow Ready T-One Vehicle Wiring Harness # 118425. This wiring harness installs in line with the factory wiring behind the vehicle's taillight housings, and it will not require you...
view full answer... - Parts Needed to Tow a Trailer with a 2008 Jeep Grand CherokeeThe Curt Trailer Hitch Receiver, part # 13251, is confirmed to fit your 2008 Jeep Grand Cherokee Laredo. If your Jeep has a rear factory tow hook it'll need to be removed. The recommended ball mount for the Curt receiver is part # C45030. It has a 1 inch rise or 2-1/4 inch drop. You need to determine the rise or drop you need for your trailer. I've attached an article to help with this. If this ball mount doesn't work for you I've also linked our complete selection of ball mounts...
view full answer... - Recommended Trailer Hitch and Wiring Harness for 2012 Jeep Grand Cherokee LaredoDraw-Tite and Hidden Hitch brands are actually sister companies and the hitches themselves will be identical except for branding. Curt hitches are of similar high quality and all three brands use robotic welding technology for uniform, consistent manufacture. In terms of hitch quality there is no one brand that out-classes the others. What you might consider in addition to price when making your choice is the hitch tongue weight (TW) capacity and the hitch's appearance. Curt hitch # C13182...
view full answer... - Does Wiring Harness for 2011 Jeep Grand Cherokee Require Dealer ActivationThank you for purchasing the Draw-Tite # 75699 and Wiring Harness # 118425 for your 2011 Jeep Grand Cherokee directly from us! I can tell you that since this harness plugs in behind the tail lights it will not require you to see the dealer to activate the tow package wiring circuit. You would only need to see a dealer for a wiring harness that plugs into the tow package port. I have added links to video installs of both products on an '11 Grand Cherokee for you as well.
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Video Edited:
Zack K
Video Edited:
Joshua S
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Lori W
Test Fit:
Nicholas E
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
Installed by:
Cole B
Video by:
Chris R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jacob
5/13/2024
So far so good. No complaints after a year.