Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
12" Tall x 15-1/2" long wheel cribs can be used to lift your vehicle for service or display. Replaces cumbersome jackstands. High-density foam with durable protective coating. Fit tires up to 10" wide.
Features:
Specs:
Race Ramps Wheel Cribs are sturdy, solid foam blocks that serve as a tough, but lightweight and rustproof alternative to jackstands. They keep your vehicle safely lifted 12" off the ground for service or display. This allows you to perform routine maintenance such as changing your oil, drive belt, or transmission fluid. Additionally, you can use the cribs for display. To use the wheel cribs, raise your vehicle high enough to slide a crib under each tire, then lower your vehicle. The tires will sit snugly in the precision-molded concave cutouts.
These cribs are made of ultra-strong, solid core, high-density EPS foam that won't crack or bounce. Each crib supports 1,500 lbs - giving you a total weight capacity of 3,000 lbs for lifting a vehicle for service or display. The cribs are lightweight, weighing only 7 pounds per crib, so you can transport and store them with ease.
The cribs are covered with a textured coating and are flat on one side. This keeps them from skidding while your vehicle is lifted. The coating is a hybrid polyurea compound that is resistant to water and other automotive chemicals commonly found around the garage. And although this coating is durable, it will not scratch, mark, or scrape your garage floor or the ground.
A built-in handle on each crib makes maneuvering them easy. The cribs can also hang vertically to free up storage space in your trailer or garage.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer.com, and today, we're gonna take a look at these Race Ramps Wheel Cribs for service and display. Now, these wheel cribs provide 12 inches of lift to service or display your vehicle, and they are going to replace cumbersome jackstands. These lightweight blocks are easy to use and transport and store, and they weigh about seven pounds per crib, so very lightweight, and as you can see, a built-in handle on each of these cribs makes maneuvering easy, and the cribs can also hang vertically to free up storage space in your trailer or garage. Now, these are made in the USA of an ultra-strong, high-density EPS foam construction, so that's going to ensure durability and stability, they do not flex at all, and it's amazing just how strong and durable they are. The solid core foam won't bounce or crack, and the weight capacity per crib is 1,500 pounds, so you're gonna get a total of 3,000 pounds of total weight capacity. Now, to use these wheel cribs, you would just need to raise your vehicle high enough to slide a crib underneath each tire and then lower your vehicle, and the tires are going to fit snugly in the precision-molded concave cutouts.
Now, these cribs fit tires up to 10 inches wide and with diameters between 24 inches and 30 inches. The cribs are covered in a textured coating and are flat on the bottom as I showed you previously, and this is going to keep them from skidding while your vehicle is lifted, and the coating on these is a hybrid polyurea compound that is resistant to water and other automotive chemicals that's commonly found on your garage floor or around the garage. And although this coating is durable, you're not gonna have to worry about it scratching or marking or scraping your garage floor or the ground that you set these on. Now, let me get my tape measure here and give you some overall measurements. The overall height, we are sitting right at 13 1/4 inches tall, and then looking at the width, we're sitting, let me go to this view here for you real quick, we're sitting right at 12 inches wide, and then looking at the depth, we're sitting right at 15 1/2 inches deep, 15 1/2 inches deep overall, let me move my arm so you can see that.
And you are going to get two wheel cribs, and that's gonna conclude our look today, I do hope that it was helpful for you. Again, my name is Andy, thank you for joining me..
Perfect for the job at hand, thank you!
Good product very easy and quick to use
Love them, I got the 10” blocks and it is exactly what I wanted.
Love this product.
The order came very quickly and were exactly what I needed. A very reasonable price.
We bought this item for our son in law who uses them in car shows for his 1968 Firebird. He is very happy with them.
Fast shipping!
They arrived! Top notch solid product, really happy with the purchase! Fast shipping as well!
GREAT SERVICE !!GOT MY RACE RAMP CRIBS IN 2 DAYS
Game changer. Much better than working on jackstands; more room, easier, and feels more secure. Glad I bought the 10" because its about as high as a regular jack will go. With these I can successfully hold off on buying a lift for a few more years.
The Race Ramps wheel cribs I ordered are exactly as advertised. eTrailer is an awesome company that clearly cares about customers. I have ordered from them before, and will order from them again. Their shipping times are great, and their customer communications are top notch. No COVID excuses, no changes after the order was placed, and no drama; just good old-fashioned customer service.
I have a lift buried in the floor, my garage is only 8’ high, it is great to raise the car using the wheel cribs on one end and ramps on the other. The lift goes back to floor height=this and I slide a piece of plywood over the lift. The car is at a comfortable and safe height to pull a transmission or perform other tasks.
Tom
Quality made products , works better than I thought , brings the car up to a good height to work under .I still will use jack stand with this product just for safety reason .all in all Satisfied with my purchase . Fast delivery. Thanks
It was just what I was looking for! Works great! Thanks!
Absolutely love them! Perfect for maintenance on my car without being on jacks.
Quality made product , use them all the time on my street rod project , a sense of security while working under your car . Worth the investment . Satisfied with my purchase .
I really like the quality and how easy it is to move around! Light weight and strong!
Time to change oil again every 2,500 miles. 2020 718 Spyder with 3.5 inches ground clearance. 414 hp, 6 Spd manual. My birthday is 6/9/54 and will be 70 years old when I change the oil again. Old school mechanic. I raise the car 3 inches at a time to get to the crib height of 24 inches at the front ant rear.
Very nice cribs. Light weight and seem to be able to support any vehicle. Much easier than ramps and stable for working under your vehicle. Bought two, need two more now!
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mark
12/31/2021
Perfect, bought two more and now have 12 of extra height to work on my project. If you dont have a lift in your garage, this is the is the trick. Made welding floor pans possible. Great product and safe work space under my hot rod!