See what our Experts say about this Stromberg Carlson Camper Jacks

• Replacement Landing Gear for 1998 Carriage Carri-Lite RK 732
  Hi James; the better option would be the Bulldog # BD500162 you were looking at. You can add the Motor and Switch Kit for Stromberg Carlson Landing Gear # LG-217884 to the Bulldog which will give it the same functionality as the # LG-4 while saving you some money. If you want a crank handle to go with it you can use the # BD500203. The distance between the mounting brackets (underside of top bracket to top of lower bracket as shown in the diagram) is 17-1/2 inches. If this matches what...
  view full answer...
  
• Replacement Landing Gear Legs Needed for a 2004 Arctic Fox 29.5E 5th Wheel Trailer
  I can give you some information to help you determine if the Lead # LC179013 and Follow # LC179014 legs will fit your 2004 Arctic Fox 29.5E 5th wheel, but we don't really have a database to pull from when it comes to OEM part numbers on trailers. Both legs have an overall height of 32" with an outer tube width of 2-1/2" and an inner tube width of 2-1/4". The total travel distance is 21" with a 16" drop leg travel. To determine if these will fit directly to the brackets that you currently...
  view full answer...
  
• Troubleshooting Landing Gear Not Lifting 5th Wheel
  Any powered landing gear or powered tongue jack will draw less power as it legs descend down toward the ground and much more as soon as they make contact and encounter resistance. This is a normal occurrence. In the same way, any jack - even a manual hand-crank type - requires less power (or force) when lowering the trailer than when lifting it. The cause for your powered landing gear losing steam could be any of several possibilities. These include the trailer's battery not being rated...
  view full answer...
• Solution for Atwood Landing Gear Leg Needing Replacement
  Hey Vince, Atwood is no longer in the RV jack business so there isn't a way to get any replacement components so the only solution would be an all new landing gear set like the # LG-4 which uses same mounting bracket dimension.
  view full answer...
• 5th Wheel Landing Gear Replacement for 2011 Wildcat by Forest River Model 31TS
  You could use the Landing Gear part # RVLG-8HDL as a replacement for what you have now on our 2011 Wildcat by Forest River. This will bolt right up in place of what you have and has plenty of capacity at 8,000 lbs so it will operate easily.
  view full answer...
• Landing Gear Recommendation for 2020 Rockwood 2781WS
  Hey John, I would recommend the Stromberg Carlson Electric Landing Gear set part # LG-4 which is a powered set like you have now but it has our highest weight rating at 6,500 lb so it would definitely not be wimpy like what you have now. What brand landing gear do you have now?
  view full answer...
• Replacement Landing Gear Follow Leg for 2003 Keystone Everest
  We can get you un-stranded! The correct follow leg for your landing gear is going to depend on how long it is. If your leg measures 29-1/2" (see attached photo), you would need replacement # LG-179014, which can be used with most landing gear sets Atwood, Venture, and Lippert models. The same is true of replacement # LG-177201, which you would use if your leg measured 33-1/2". I've attached a link to a video review for you to take a look at as well.
  view full answer...
  
• Replacement Landing Gear for 1998 Fleetwood Terry 5th Wheel
  Hey Jeremy, the Stromberg Carlson Landing Gear part # LG-4 that you referenced would work great to replace what you have. This comes with a motor that allows it to be powered either by that or with the included hand crank. This also fits the standard landing gear mounting bracket dimensions as well. Do you see a brand or any info on the landing gear you have now?
  view full answer...
• What Landing Gear do I Need for My 2012 Keystone Fuzion 5th Wheel Toy Hauler?
  Hello Edgar, We will definitely have some landing gear for you, but I do not have a database that supplies me with what is put on what trailer. That would be quite the long list! Based on my research the Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 6,500 lbs # LG-4 should work as a great replacement. Here are some things to check: - Leg length: 33-1/2" - Total lift: 34-7/8" - Travel: 19-7/8" - Drop leg: 15" - Weld spots 19 1/2" apart You are more than welcome...
  view full answer...
• Do You have a Replacement Landing Gear Leg for My 1996 Westwind by Kustom Koach 5th wheel?
  Hello Josh, We definitely have something that is going to work for you, but I do not have a database that supplies me with what is put on what trailer. Since you cannot find any markings on the landing gear to identify what you have, I would need some pictures and measurements so that I can try to identify it. If the landing gear is the original, it might be best to swap it out. If you wanted to go with a new system, the Stromberg Carlson Electric Landing Gear Set # LG-4 would be a...
  view full answer...
• Can the Gearbox and Motor Be Rotated on the Stromberg Carlson Electric Landing Gear Set LG-4?
  Yes, it can and thanks for the picture! The electric motor and gearbox can be rotated to the front of the Stromberg Carlson Electric Landing Gear Set item # LG-4. What's wrong with your Venture M-9000-PK landing gear? We have some replacement parts for it. I've listed them below: Replacement Gearbox for Venture Aluminum Electric 5th Wheel RV Landing Gear Assemblies item # LC276602 Lippert HD 6500-lbTuson 5th Wheel RV Landing Gear Motor item # LC196308
  view full answer...
• Recommended Replacement For Atwood MPD 71125 Landing Gear
  The best option to replace your Atwood MPD 71125 landing gear is from Stromberg Carlson, which is going to fit in your current mounting brackets, so all you have to do is choose the weight capacity that is right for your trailer, either 5,500 or 6,500 lbs: - 5,500 lbs: Stromberg Carlson Electric Landing Gear Set # LG-1 - 6,500 lbs: Stromberg Carlson Electric Landing Gear Set # LG-4 These landing gear sets come with everything you need for a total replacement, including the hand crank,...
  view full answer...
• Determining Which Landing Gear Fits A 2011 Forest River Sandstrom 5th Wheel Toy Hauler
  I would be happy to help you find the correct replacement landing gear for your 2011 Forest River Sandstorm 5th Wheel Toy Hauler, but based on the measurements you provided there is not an exact replacement option available. The closest options is going to be the Lippert Electric Landing Gear Set - Weld On - 37" Lift - 6,000 lbs # LC333964 which measures 15-1/2" inside to inside of the weld stops, and 17-1/2" outside to outside of the weld stops. This option along with all of the available...
  view full answer...
  
• Determining The Correct Replacement Landing Gear For A 2005 Thor Tahoe Transport 5th Wheel
  Technically any landing gear will fit your 5th wheel, but the real key is to find one with matching weld stops so that you don't have to cut the brackets off and weld on new ones. The Stromberg Carlson Electric Landing Gear Set # LG-4 has a 19-1/2" distance between the weld-stops (pictured below). I recommend measuring your current landing gear weld-stops and moving forward with that measurement to make replacement a much easier and cheaper process.
  view full answer...
  
• Repair Parts for Venture VMC940RB 5th Wheel Landing Gear
  In case you want to just service your existing Venture VMC940 5th wheel landing gear driver leg you can use gearbox # LG-179015. For a complete replacement lead jack use Replacement Lead Jack with Drop Leg # LG-179013 which is a universal fit that works with major brands. I linked a diagram with measurements so you can compare to yours. For a motor to convert the gearbox and leg to electric operation you can use part # LG-196308.
  view full answer...
  
• Stromberg Carlson Landing Gear Replacement for 2001 Fleetwood Prowler LSI 30 5G
  The Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 6,500 lbs # LG-4 will work well with your trailer. I've attached a photo that shows where the weld stops are for the brackets mounted on your trailer. You shouldn't need to change out the brackets so these should bolt right up and work well for you.
  view full answer...
  
• Are Landing Gear Legs for a 5th Wheel Trailer Brand Specific
  The most important metric for selecting new landing gear legs for a 5th wheel trailer is the overall length of the outer tube. The two most common measurements are 29-1/2" and 33-1/2". If you select the correct replacement based on the outer tube length that will then most likely ensure that the mounting bracket lines up so no welding is required. If your trailer has outer tubes that are 29-1/2" long then you will want to use part # LG-3 but if your trailer has outer tubes that are 33-1/2"...
  view full answer...
  
• Replacement Landing Gear for 2010 Open Range 5th-Wheel Trailer
  For your 2010 Open Range 5th-Wheel Trailer, I recommend looking at the Stromberg Carlson Electric Landing Gear Set # LG-4. Each leg on this set is 33-1/2 inches tall and provides up to 19-7/8 inches of travel. It has a combined weight capacity of 6,500 pounds and the direct-drive motor will reduce strain on the jack for easy stabilization. To determine if this will fit with the brackets you already have welded to your trailer, you will want to take a measurement between them. The distance...
  view full answer...
  
• Determining if Replacement Landing Gear Set Will Mount to Existing Brackets on Trailer
  The weld stops on the Lippert Electric Landing Gear Set # LC333964 referenced in your question are not designed to be moved, but I can give you a couple dimensions to see if they will match up to the existing brackets on your trailer. The weld stops on these legs measure 17-1/2 inches apart outside to outside. The total length on the legs is 29-1/2 inches. You can take a quick measurement on your existing brackets to see if these will mount directly to them. For the Stromberg Carlson...
  view full answer...
  
• Replacement Landing Gear for 2007 Cougar
  From what you have described it sounds as if the landing gear needs to be replaced. For your 2007 Keystone Cougar, I recommend the Stromberg Carlson kit, # LG-1 which matches exactly what you have and includes the motor too. Or, for a non-powered kit that will cost a bit less, # LG-183708 but this requires you to hand crank it.
  view full answer...
• Replacement Landing Gear Legs for a 2010 Jayco Eagle Super Lite
  I have attached a photo for you that shows how to properly measure the outer tube on a landing gear leg. I have not heard of a landing gear leg with a 36-1/2" long outer tube so if this is what you have then I recommend you replace both the lead and follow legs so that you can be sure they match. For this, the correct replacement for you should be part # LG-177202 for the lead leg and part # LG-177201 for the follow leg. In order to make sure they will work you need to measure between...
  view full answer...
  
• Recommendations For Complete Fifth Wheel Landing Gear For 2004 Jayco Eagle
  I do have a couple of solutions for you that will work for your 2004 Jayco Eagle fifth wheel. Upon first glance, it appears that your landing gear might have been made by Venture, which is not one of our vendors, but we sell other systems that will work well. I recommend using the Ultra-Fab Deluxe Electric Landing Gear Set - 38" Lift - 12,000 lbs # UF17-943010. This landing gear will allow you to adjust independently for easy and quick leveling. The leg will travel 1 inch every 15 seconds,...
  view full answer...
  
• Determining The Correct Replacement Landing Gear For A 2010 Keystone Montana
  Absolutely, and thank you for your measurements. For your 2010 Keystone Outback 285FL, the closest we have is the Stromberg Carlson Electric Landing Gear Set # LG-4. The distance between the weld stops on # LG-4 is 19-1/2" which is 1/8" shorter than what you measured, I would double check that the measurement you measured is accurate to ensure these will work. Also, you will need to verify that the outside to outside measurement is 21-1/2". This landing gear has a total lift of 34-7/8",...
  view full answer...
  
• Replacement Landing Gear for 2011 Heartland Big Country 5th Wheel Trailer
  If your landing gear is electric then it could just be a switch or the battery could be bad. Having the battery tested will determine if it is the problem. You can determine if the switch is the problem by applying power directly to the motor; if it works fine then it is likely a problem with the switch. A battery or switch replacement is a lot easier and less expensive than a whole new landing gear system! But if it turns out that it is neither a switch nor the battery then I agree that...
  view full answer...

Do you have a question about this Camper Jack?