Arrives before Christmas 
When your camper is on uneven ground, maintaining stability becomes crucial. This scissor jack, constructed with sturdy steel, boasts a 5,000 lbs capacity that keeps RVs and travel trailers secure. It's perfect for a Fifth Wheel Camper, RV Motorhome, or Teardrop Camper, offering the unwavering stability you need on the road.
Facing soft or uneven surfaces on your travels? The Leveling Scissor Jack rises from as low as 4 inches to a substantial 24 inches, allowing you to adapt easily to varying terrains. Whether you're facing a steep incline or a low valley, it provides the lift needed for safe and level parking.
Don't let unique frame designs limit you. Whether you prefer a bolt-on for quick removal or a weld-on for permanent stability, this jack accommodates both. It's tailored for easy installation on Fifth Wheel Campers, Pop Up Campers, and more, with a bow-tie base ensuring steadfast placement.
Sometimes it’s about knowing what your equipment can’t do. This jack is designed to stabilize a portion of your trailer's weight, perfect for keeping things level but not intended for full vehicle lifts. This specific focus keeps your adventures safe and worry-free.
Swapping between multiple tools on the campsite can be a hassle. That's why you can pair this jack with the JCH-1 crank handle for seamless height adjustments. Although sold separately, this intuitive option is a handy companion on any road trip.
These jacks are designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer. Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of the jacks.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today you'll be getting a look at and seeing how to install the Stromberg Carlson Leveling Scissor Jack Set, with a quantity of two, part number JSC-24. They're also available in a quantity of one, with part number JSC-24-IND.You can bet on this pair of jacks. These scissor jacks from Stromberg Carlson are great for stabilizing and leveling your camper. As you can see, if your trailer is out of level, you can use your scissor jacks to level it. Check it out. Much better.
As you can see, without your scissor jacks engaged, there's a lot of movement in your trailer. With your scissor jacks engaged, all that extra movement is gone. They're adjustable between four and 24 inches and they have a 5000 pound weight capacity per jack. You can easily raise and lower them with the included crank handle. It's going to work out great on most surfaces.
As you can see, we're on concrete here. The bow-tie base is going to keep it steady even on soft surfaces.They're a bolt-on or weld-on installation. We'll go ahead and show you how to bolt them on now. Here you can see our old rusted out stabilizer jack. It's bent.
We're going to be replacing it. I've gone ahead and removed the old stabilizer. Let's bring in our new one. With our new one, you can see it's got multiple mounting locations. It's completely universal.
Now, you may or not be able to use your same mounting holes and locations. What you need to do is hold it up and figure out where it's going to work best. Now, once you've found a good location to install your stabilizer jack, you want to be sure that you can still easily access your drive nut, which is going to raise and lower your stabilizer jack.You'll want to raise your jack up to where it's making contact with your frame where you want to install it. Then you can mark your holes. Now, there are six holes on each side. I'm only going to be using four total, two on each side. You can use whichever holes work out best for you. Once you've got your holes marked, go ahead and move the jack out of the way, and then you can begin drilling out your holes. I'm going to be drilling out quarter-inch holes. If you'd like to, you can use a pilot bit and then drill out your final size. All right. With all those drilled out, you can go ahead and install your stabilizer jack. You will have to provide your own hardware.I'm just using some quarter-inch bolts with some flat washers and lock nuts. Now you can bring your jack back in and align your holes. Now you'll just loosely install all your hardware. Now we can tighten up our hardware. Now you can raise up your jack and it's ready for when you need it. That's going to complete your look at the Stromberg Carlson Leveling Scissor Jack set.
Exactly as ordered. Super fast shipping.
Do you have a question about this Camper Jack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.