Product Experts Available Now!
Call 1-800-940-8924
Quick Fist Mini Clamps - 5/8" to 1-3/8" Inner Diameter - Rubber - 25 lbs Each - Qty 2
(127 reviews)
Price: $8.90
In Stock
Quick Fist
Quick Fist Mini Clamps - 5/8" to 1-3/8" Inner Diameter - Rubber - 25 lbs Each - Qty 2
Part Number: QF30050
In Stock
$8.90
Retail:$21.17
You Save: 58%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (127)
- Q & A (0)
- Photos
Quick Fist Tie Down Straps - QF30050
- Tie Down Clamp
- Trailer
- Quick Fist
- 0 - 175 lbs
Durable rubber, jaw-style clamps with adjustable straps help you store and transport fishing rods, small flashlights, and more. They mount horizontally or vertically to your vehicle, trailer, garage wall, or any flat surface. 50 lbs WLL per pair.
Features:
- Works great on emergency vehicles, work trucks, off-road vehicles, military vehicles, ATVs, and boats
- Quick and easy installation
- Mounts with one #10 screw, bolt and washer, or 4 sheet metal screws and washers (sold separately) through the holes on the four corners of the pad
- Heavy-duty transportation-grade rubber
- Unaffected by climate
- UV-resistant
- Made in the USA
Specs:
- Holds objects from 5/8" to 1-3/8" (15.748 to 33.02 mm) in diameter
- Each clamp supports a safe working load of 25 lbs (11 k)
- Mounting area: 1-1/2" x 1-1/2" (38 mm x 38 mm)
- Quantity: 2 clamps
- 1-Year limited warranty
Note: Quick Fist clamps are not to be used on exhaust pipes or any pipe that consistently exceeds a temperature of 180 F (82 C).
A new Quick Fist clamp fresh out of the mold can be stiff. Use two hands to open the jaws vertically and then pull each jaw once or twice. Close the jaws and open and close the strap a couple of times. It's now ready for mounting.
For applications where the Quick Fist clamp will be used at or near its maximum opening dimension, the clamp will not work in your hand, as it must be bolted to a fixed surface for the rubber to stretch properly.
Mount your small tools like fishing rods and AA-cell flashlights with the mini Quick Fist clamp.
Installation
1. Use either a #10 screw or bolt and washer to fasten. (Alternatively, you may use 4 sheet metal screws and washers through the holes on the four corners of the pad.) Do not over-tighten.
2. Mount with the strap facing in any direction.
3. To clamp: put the tool or implement into the jaws. With both of your thumbs on the strap, push strap to reach the desired tightness. Repeat as necessary.
4. For smaller diameter objects, push jaw without strap inside the other jaw and tighten strap on top of jaw.
30050 Mini Quick Fist Clamp - Qty Two
Installation Details
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
Ratings & Reviews
4.9
127 reviews
by:
David
10/20/2026
Fits my boat hook snug and secure. Thanks to customer serviced for suggesting this size.
by:
Michele
03/28/2018
These were just what I was looking for --- using them on a t.v. antenna "hack" for my teardrop trailer. I have an expandable painter's pole. Took a12" x12" piece of wood, screwed these clamps on and used bolts/wing nuts on the other side to mount one of those flat antennas. The clamps hold the pole securely but also it's easy to take the pole off. etrailer as always, provided fast shipping.
by:
Karl
01/30/2019
I purchased the Quick Fist clamps to hold a shovel on my snowmobile for riding in the Backcountry. I saw them on etrailer and the price was half as much as anyone else so I ordered 2 sets. I called to confirm some information with Bill and he was excellent. I received my clamps in 5 days including the weekend. The clamps are made well from a solid rubber and the clamp strap over the top is flexible enough to be hooked on the 2nd or 3rd notch down. I mounted them to a 1/4" plate using #10 machine screws with a washer under the head to eliminate the problem of pulling through the rubber and I put lock nuts on the back. These clamps are perfect for my application. I have dealt with etrailer several times and they are excellent folks to deal with and have great products at awesome prices. I will surely give them a call for my next project.
by:
David
01/03/2026
This is exactly the product I needed for a storage project I was working on. And kudos to them for customer service. I was having difficulty ordering online, so I sent them an email. I heard back quickly, and was able to place my order over the phone. Well done!!!
by:
Kenneth
03/18/2026
easy transaction fast shipping
by:
Phil D
11/08/2019
The straps after a year are still holding up strong. Being exposed to Maine winters in below 20 degrees haven’t fazed them at all. I even drilled too far when installing these to my toolbox and started to tear one of the straps and the tear hasn’t gotten any worse than that. I completely recommend these straps.
by:
a_flifisher
04/02/2015
Used the mini clamps to make removable rod holders for my truck. Works great!
by:
JOHN
12/01/2024
Great clip for small tools in cargo trailer. Easy to install in any configuration.
Etrailer was a recent find for me as I was searching for these clips and believe it or not, they were not ever present in local stores. Service has been outstanding with prompt order entry and delivery! Nice job team Etrailer.
Since this order, I’ve been back buying more trailers accessories.
Etrailer was a recent find for me as I was searching for these clips and believe it or not, they were not ever present in local stores. Service has been outstanding with prompt order entry and delivery! Nice job team Etrailer.
Since this order, I’ve been back buying more trailers accessories.
by:
ratled
01/04/2018
Bought these to hold a small shovel and faller's axe in the Jeep. Used a pair of 2.5" U bolts and attached these to the U bot bar. Works great, holds great even off road
by:
Leon
01/04/2026
I was looking for something to mount my spud bar to my Skandic and these work perfectly!
by:
Naomi
06/12/2018
We used these mini-clamps to hold a pole about 1-¼ inch in diameter that hold a 5-way weather station on the travel trailer so we have a bead on the weather when we are camping.
They were easy to install and two of them hold the pole securely. The clamps were mounted on a vertical back side of the trailer so the the pole can be located at least 6 feet off the ground for best results from the weather station.
If you level the trailer, the weather station is pretty level as well and these straps hold the pole in the wind and rain and we are very happy with how they perform.
They were easy to install and two of them hold the pole securely. The clamps were mounted on a vertical back side of the trailer so the the pole can be located at least 6 feet off the ground for best results from the weather station.
If you level the trailer, the weather station is pretty level as well and these straps hold the pole in the wind and rain and we are very happy with how they perform.
by:
Dennis
02/13/2018
I haven't had the opportunity to put this product to work yet but have no doubts it will do exactly what it's designed for. These grips are made for small diameter items and I may order some larger ones also. I have some hand trucks I want to secure in transit. These grips were sent promptly. Thank you etrailer!
Dennis
2/13/2019
I installed these in a commercial delivery truck. They worked fine until removed for service work done on the truck overhead door. They were in the way and we never properly reinstalled them. They should have a long service life if installed correctly. I would recommend using a flathead screw or bolt to prevent pull-through.
by:
Justin
02/24/2025
Out of all of the advertised Quick Fist Mini clamps out there, etrailer.com was the only one that had the photo of them with the 4 mounting holes like my application needed.
by:
Barney Mc
10/31/2016
As always, ordering from etrailer.com is easy and the shipping is quick. I really appreciate their automatic recommendations of products similar to ones I pick, but less expensive, or even better than what I was ordering. These Quick Fist clamp hold a shovel and pick tight to the rack on top of my LandCruiser. And removing the tools is easy.
by:
Wes C.
06/12/2016
These things are sweet! Can be used for many different items. Here I'm using it to secure a GPS rod to a Polaris Ranger 500 (2012) for surveying.
by:
Albert G.
03/15/2018
Just as pictured. Worked well for what I needed them for. Shipped quicker than I expected.
by:
William
05/09/2025
Very fast shipping and being informed the whole time makes trailer a great seller
by:
Benjamin
03/22/2018
In preparation for an over-landing trip, I hurriedly ordered two of the quick fist for tool attachment. Unfortunately they were too small to attach a full sized shovel to my roof rack(my original intent). I wound up tying down the shovel with a rope. The quick fist were just large enough to hold a small flashlight within the jeep which is what I re-purposed it for. The delivery of the product was prompt and the apparent quality is good, price point also refreshingly good, and I don't have a flashlight rolling around in the cab anymore. My fault for being in a rush. Suggest adding common tool examples rather than just diameter measurements when describing what it will hold. Thanks.
by:
Zachary
04/24/2023
Product arrived on time. Got it installed and so far I am loving it. I could have gone a size smaller but it will do.
by:
Richard
07/22/2020
Great product, great service, will definitely order from etrailer again.
Richard
7/23/2021
They work great!! In fact I need more of them!! Great product going to buy the multiple size package next
by:
Patrick
02/13/2022
Works great. I screwed it to the side-wall of my horse trailer in the saddle rack area to hold a poop fork in place. It fits a small handle only.
by:
K D
02/01/2025
Works great to secure shovel and ax to camp trailer and UTV rack.
by:
Spencer
01/31/2023
work great, I use these to hold shovels and a rake to the underside of my horse trailer roof. I mix two sizes. It solves a storage issue I've had for years
by:
Robert D.
11/18/2016
Package arrived in good shape. No shipping damage. Items were neatly packed in a cardboard box using heavy brown stuffing paper.
Quick service. All parts I needed were in stock and shipped out on the same day they were ordered.
I'm very pleased of the way Etrailer handled my order.
Quick service. All parts I needed were in stock and shipped out on the same day they were ordered.
I'm very pleased of the way Etrailer handled my order.
by:
Mark
07/19/2017
Installed these are a fire slide in for wildland fire work. Works perfect for broom size and slightly larger handles. Fastens down very well.
25
127
true
Show More Reviews
See what our Experts say about this Quick Fist Tie Down Straps
- Recommended Hitch and Bike Rack for Forest River Micro-Lite TrailerStarting with the trailer hitch I recommend the Curt Adjustable Width Trailer Hitch Receiver # 13703. This adjustable Class III hitch is designed specifically for trailers like your Forest River Micro-Lite and will install perfectly as long as the camper features a box frame, C-channel frame, or I-beam frame that measures 22 to 72 inches wide. It will provide you with a 2 inch receiver and it has a tongue weight capacity of 350 pounds. The hitch can be bolted to the Micro-Lite with the...
view full answer... - Dimensions of Quick Fist Mini Clamps QF30050I would be happy to help! On the Quick Fist Mini Clamps # QF30050 the clamp is 5/8" wide x 2" tall and the base measures 1-1/2" wide x 1-13/16" long with 3/16" diameter mounting holes. I made a few diagrams of these measurements for you as there are no CAD drawings available. I also included a video review of the # QF30050 for you to take a look at.
view full answer...
- Are There Quick Fist Clamps For Smaller Diameter ObjectsThe Quick Fist Clamps are offered in a few different sizes and configurations. The Quick Fist Mini Clamps part # QF30050 for example fits 5/8" - 1-3/8" diameter objects. I have attached a full list of options below.
view full answer... - Mounting Dimensions and Installation Details for Quick Fist Original and Mini ClampsI was unable to obtain a detailed drawing of the Quick Fist Original Clamps # QF10010 and Mini Clamps # QF30050 referenced in your question, but I am able to provide you with some measurements and instructions that may help with your application. Starting with the Quick Fist Original Clamps # QF10010, this durable rubber, jaw-style clamp will easily install using a single #10 bolt or screw. I have included an image that shows exactly how they will mount to your wall. The clamp has a mounting...
view full answer...
- How Does the Quick Fist Trailer Cargo Control # QF30050 Release Cargo it is HoldingYou would need to pull the handle of the Quick Fist part # QF30050 down and away from the item it is securing so that you can stretch it far enough that it's no longer grabbing the other side of the clamp so that it can be pulled out and release.
view full answer... - Would Item be Able to Turn Easily if Secured with Quick Fist Mini Clamps # QF30050If you clamped something pretty tight with the Quick Fist Mini Clamps # QF30050 that you referenced you would not be able to turn the item easily.
view full answer... - Can the Quick Fist Mini Clamps # QF30050 be Installed with Open Jaws Facing DownYes, since the jaws are what will be holding the items they will be able to handle 15 lbs of weight. The Quick Fist Mini Clamps # QF30050 are rated for 25 lbs each so 15 lbs will not be a problem at all.
view full answer... - Weight Distribution System for 2021 Rockwood Micro Lite 2109SHey Sheila! I can definitely help you find a good system based on that information. The tongue weight of the trailer is key here. Looking up the specs for the 2021 Rockwood Micro Lite 2109S I can see that the dry weight is 4,171 lbs, dry tongue weight is 412 lbs, and the GVWR is 5,692 lbs. If you add on a couple batteries and propane tanks to the tongue of the trailer 570 lbs sounds about right. Tongue weight is typically 10-15% of the trailer weight. At 15% of 5,692 lbs you're looking...
view full answer... - Could Quick Fist Mini Clamps # QF30050 Hold Mops or BroomsYou could pretty easily hold brooms or mops vertically with the Quick Fist Mini Clamps # QF30050 that you referenced. It designed for holding a tool with two clamps but if you wanted to repurpose them to hold a broom or mop you certainly could. Holds objects from 5/8" to 1-3/8" (15.748 to 33.02 mm) in diameter
view full answer...
Do you have a question about this Tie Down Strap?
Info for this part was:
Expert Research:
Jameson C
Written by:
Laura H
Video by:
Dustin K
Installed by:
Cole B
Installed by:
Randy B
Video Edited:
Chad S
Updated by:
Chelsea B
Updated by:
Wilson B
Updated by:
Matthew S
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gwendolyn Y.
12/3/2024
Hey John! I'm glad that you found us! I look forward to hearing about your future trailer projects.