Video Transcript for Review of Taylor Made Boat Bumpers - Through-Hole Boat Fender - TM58SR

Hi everyone, Steven here with etrailer.com. Today we're taking a look at this, Taylor Made Big B through-hole boat fender for 20 to 25 foot long boats in a nice onyx black vinyl. Now, these are gonna protect your boats hull from damage caused by maybe docks and pilings and those kind of things whenever you come in contact with them. This one, and like all other ones, has an inflation hole on the one side here. There we go, and it's hollow all the way through. You can put a rope all the way through it, but you can inflate this or deflate it to fit your personal needs.

As you can see, I've only put about half the air here in this one, and all you simply do is use a ball needle to inflate that, very simple to do. These are gonna stay in place better than the non-ribbed fenders. So this one has these nice ribs on it. You can hang it horizontally or vertically, it's up to you. The horizontal position is great for docking and maybe awkward spots, areas where tides frequently change, whereas the vertical position is great for standing docks, or times when you need to protect specific areas of your boat's hull.

Now, this simplifies rigging for a cleaner, easier to manage setup. Like I mentioned before, just simply run that rope through. No need to tie off like the double eye fenders that are out there. Now, you can again adjust that air from that inflation spot as much as you need or as little as you need. Constructed of a one-piece marine grade vinyl, there's no eyelets that are gonna tear off or break off on you or anything like that.

It's not gonna mark up your boat. The black color's actually molded into the material. So again, this is 15 inches long, six inches diameter. The center tube is three quarter inch. It will accept up to a five eighth-inch diameter rope.

And that's gonna wrap it up for our look together. I'm Steven, thanks for watching.