Best Ford Ranger Tie Down Anchors

Solid construction, exactly what I was looking for. Fast shipping. Would purchase from this company again.

The home we bought in Nov has a deck and patio door that get full sun in mid-to-late afternoon. I was looking for strong rings I could bolt on 4x4 posts to suspend shade cloth as a solution... found large surface-mount D-rings at Home Depot, but they're costly and bulky. Via Google search, I found your company's D-ring products with smaller size, but same strength. They're exactly what I was looking for... reasonably priced, strong D-rings that mount with two 3/8" carriage bolts. They arrived yesterday... mounted two, so far...

Overall good product and will do the job. My only complaint is a 3/8” lag bolt hits the curved part of the bracket before it lays flat. So I had to grind a little off the bolts.

The pictures of these don't do them justice. They are larger than they look on the website. I'm using 4 of these to secure my Jeep to my trailer. I would have given 5 stars but there seems to be a dimensional issue if you use 3/8" carriage bolts. The bolts cannot seat fully into the square hole because the hole is to close to the curved portion that holds the d-ring in place. This doesn't affect the function but does hurt the appearance of the finished product.

Nice quality. Didn't expect them to be tapered. My Harbor Freight set has a tab at the bottom. I'm interested to see how these fit. I needed a second set for a second motorcycle trailer I built myself. Thank you.

Great brackets. Very well built. Strong and easy to install on our trailer. Highly recommend for anyone looking for pocket trailer brackets.

Great product and everything was included in the package. Even bolts. This is definitely the way to go if you ware strapping down a med sized load. My application was ATV's and a UTV. I decided to strap over the tires so I used these and welded hooks for my application. See my pictures for details. If you are looking for the right tiedown, this is it in spades.

Tie downs were exactly as described. Fulfilled my needs for what I was using them for.

Good, solid piece. 2K WLL and 6K break strength are higher than most other comparable swivel D-rings and flush mount D-rings. I have a steel deck trailer and one of my flush mount D-rings failed so I replaced all 4 with these. Being as mine is steel deck, welding is a solid install. I trimmed the edge flange for a tidy fitment for surface mount but later decided to just mount from below and weld in from the top. It came out very nice, I suggest similar mounting for those with steel trailers. of course, I had to grind off the zinc from the weld zone and painted with rustoleum both on top and from below.

Brophy swiveling D ring tie downs are pretty awesome. Super heavy duty, really like the Swivel design. By having the freedom of movment the ancor is never in a bind, at any angle and tension is pulled evenly from any direstion. The matching backing plates are a must as far as I'm concerned. Installation was easy. All holes on the backing plates ligned up well. No issues. I will give it up to etrailer.com also for the fast shipping. It means alot when you have a project going on. Over all satisfied with my purchase.

I have been looking for this particular type of product for a few weeks. I have looked pretty much everywhere I could think of. I saw this product and compared the price to other similar products. Given the lower price of this product I was a little hesitant to purchase until I read the reviews. I am very glad I read the reviews and am more than pleased with the quality of items received. I installed these on the sideboards I have on my Silverado (please see attached photos). I usually do not right reviews on products but felt I should take the time to review this one. Thanks etrailer.com for the excellent product and super fast shipping. David B. from North Carolina.

Smooth transaction, quick in shipping out parts. High Five to the folks at "etrailer"

This is a very high quality, well made product. It is exactly as described on the etrailer.com site. The price was very reasonable and it was shipped - and delivered - very quickly. I have had many stake body trucks and trailers and this would have worked excellently for its intended purpose as a stake pocket. I will be using it to mount a stock front bumper on the rear of my Jeep Wrangler YJ by installing it sideways as a mounting bracket. Once drilled and mounted backwards and sideways (see pictures), the size I bought fits the ID of the bumper so it can be mounted over the bracket "tabs". I took a picture of the stock bumper mounted on the front to show how it mounts on the frame ends and held the stake pocket in place at the rear. The stake pocket tabs will slide inside the bumper which will then be bolted to it. Although I'm not using it as designed it is an excellent solution for my application. Note to etrailer: custom bumper mounting hardware is hard to find. This stake pocket provides a solution and would make an excellent product marketing extension.

Well made, metal is same size and thickness that came on trailer. Would recommend to anyone needing to add more tiedowns on your trailer.

I welded these tie down anchor points to my car hauler trailer, they seem to work great.

These things are beast, just the look i wanted for my off road mini camper im building. Very heavy duty, welding 8 of these on the camper. 2 on every side. Will be great for strapping down canoe and such on rack on top of camper. These are like what you see on flat bed tractor trailers.

Extremely well built and solid anchors. I was missing a bolt from the kit, and etrailer quickly sent me a replacement. great service, great products.

I bought these D-ring anchors for my flatbed trailer. They were super easy to install and have been working great. I would definitely recommend for anyone who needs to add anchors or add additional anchors to their trailer. My trailer sits outside year round and these still look like the day I installed them and function perfectly.

etrailer is probably the best one stop trailer solution on the web. I just fabricated my own deck over dovetail tailed from scratch. I ordered just about everything I needed for the build. The sales staff are very knowledgeable and professional. I highly recommend etrialer to anyone weather your rebuilding your trailer or fabricating a new trailer, they pretty much have everything your looking for with very good pricing and they stand behind every product they sell.

Just what I needed on my steel deck trailer. I carry my cargo with confidence

I mount them open end up on the rear sides of my boondocking vehicles, I use them to hang gear on while we get ready to hike or metal detect. They work great and are stylish enough to look good on a Jeep or Pickup.

didn't like or use. Went with a different solution.

these are not only perfect for my classic trucks I also see the same ones on others - I'm in the cool kids club

Best piece I've seen for light duty hold-downs for my El Camino. Great product and great company to deal with.

These installed easily. I especially like the oversized backing plate. I was able to mount this this to my deck and still put separate large deck bolt bolt through the backing plate to mount straight to the frame.

Item was exactly as described and delivered fast.

Tie-down rings installed easily and are more sturdy and heavy duty than I expected. The swivel is nice as it makes the anchorage more versatile. Plus they look great.

I installed of these as part of my project to replace the floor of my 16 ft. utility trailer. I was able to drill and chisel the countersink without too much trouble. It is challenging to drill the holes for the bolts to align perfectly with the bottom bracket. In fact, I am not sure I could have done so with all the other boards installed. I recommend doing this as part of a new floor install. I Lao agree with some other comments that the bolt holes are very close to the countersink hole. This makes it very difficult to avoid collapsing the bolt drill hole into the countersink hole, which further affects the ability to drill straight. I think if I were to do it again, I’d mark the boards, take them off the trailer, and use a drill press. All that said, I really like the look and function of these anchors. I think they will perform well in the rough-sawn oak floor. Here are some pics of the finished job:

Excellent product - just what we needed. Ordering was easy as it usually is.

Appears to be what was ordered. Packaging leaves little to be desired. etrailer has taken a step backwards in the last year. Strongly considering finding another provider. Product specialist are no longer knowledgeable in the areas of product information.

Very happy with these 1200 lb stainless steel anchors for my trailer. Was able to position out of the way and i can get 3 strap hooks anchored on them. Mounting hardware not included. I anchored with stainless steel washers and nuts on the underside. Worked perfect for my application.

I used the anchors for tarp straps on my trailer. The stainless anchors will not rust when attached to my aluminum trailer.

The etrailer tie down cuffs were a perfect fit for our wooded sides for our trailor. They welded up great and should last forever.

Welded them on and they worked perfectly.

I ordered 8 of the Item: CE45004G to hold 2 x 4 posts for the sides I made for a utility trailer. These are heavy duty and do the job very well. Shipping was fast, and etrailer emailed a follow up to be sure they arrived. One note, these supports DO NOT taper from top to bottom as some others on the market do. They are formed straight, so a 2 x 4 will slide into them - and continue to slide right on through. This is what I wanted on mine, as I use lock pins with them, through the center holes. Some people may want the kind that have the taper, and lock the 2 x 4 in place as you shove them down into the support. I bought 5/16" by 4" long, square wire, locking pins to hold the 2 x 4s in the pockets.

It'll b a while before I actually connect these to my utility trailer but they are exactly what I was looking for and should work out perfect. It's just too cold outside to do this right now.

I bought a similar product with the same weight rating from Amazon. I got 8 for about half of the price of 4 of these. When I got them they just didn't look like they would hold up so I bought these. These are much bigger and stronger than the anchors I bought on Amazon. They are expensive, but cargo falling off the trailer or falling into the car when stopping would be more expensive.

Just what was need for tie down attachment.

arrived quickly stake pockets are of good quality

Added these to supplement the pockets that the trailer manufacture had provided on the trailer. Can not have too many pockets spaced around the trailer to tie down loads in the most secure manner. They are well made and easy to weld on to the trailer