Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Mount these stainless steel anchor points to your truck or trailer to easily secure your rope or cord.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
All right. Today we're going to show you part number EM09095 from Erickson. This is their stainless steel truck or trailer anchor. A few things to know about this anchor point, is that with this part number you get two anchor points, and also, it's constructed from stainless steel. It's also ready 1,200 pounds. The hardware we use to install it does not come with the kit, so you want to use your favorite hardware, depending on the location you're going to install it: on trailer or truck. We have one already installed. We have the other one that's not installed yet. We'll also cover a few more features.
First up, it has the countersunk holes in here so your pan head screws will fit nicely inside there. The drill that you want to use, that seems to work the best, is a 13/64 drill bit. Our bolt pattern on here is going to be 1 3/8 inches from here to here, and this dimension's going to be about one inch. Not much to it. Let's go ahead and install it on the other side of our trailer. The location's obviously going to vary from application trailer to trailer. The main that the manufacturer states, that you want your attachment point, or anchor point, going to some steel on the trailer. On the edge of a rail here, it's not going to be a problem.
However, if we wanted to install it on the deck, we would have to make sure we have some of the steel underneath. If we look at it from the top, this way. In this case, if it was on a deck, you're going to have your anchor point, your wooden deck, and then your support structure underneath that's steel. You just have to have long enough screws to reach through your deck and into your steel. Once we've found a location for our anchor point, we'll go ahead and just put it into place. You can just hold it and mark the holes, or, if you can, maybe use something to clamp it down. We can just go ahead and use a drill bit to make our starting points. You can mark your holes that way.
Go ahead and take that out of the way and drill the holes. All right. Now the manufacturer recommends a pan head screw to attach it. Underneath, it would be a good idea to use a lock washer, and flat washer, and a nut. Okay. In just those two steps, our anchor point is installed and it's ready for service. Now you can use your favorite tie down point and secure your cargo. All right, and with that, that will finish it for part number EM09095.
The Erickson stainless steel truck or trailer anchor, two pack. .
Average Customer Rating: 4.8 out of 5 stars (40 Customer Reviews)
Mount these stainless steel anchor points to your truck or trailer to easily secure your rope or cord.just what I wanted
un-polished bases and thin appear way lesser quality than cheap anything SS at Home Depot
Very happy with these 1200 lb stainless steel anchors for my trailer. Was able to position out of the way and i can get 3 strap hooks anchored on them. Mounting hardware not included. I anchored with stainless steel washers and nuts on the underside. Worked perfect for my application.
I used the anchors for tarp straps on my trailer. The stainless anchors will not rust when attached to my aluminum trailer.
The Erickson anchor points worked wonderful for tie down spots around the outside of a utility trailer I built. I did however drill the four holes larger and used normal hex head bolts instead of flush mount heads. The stainless steel looks great and should never rust. I would buy them again if I needed some sort of anchoring system.
After placing my order I recieved updates on the progress of my order (in process, shipped with tracking number). So I would give the customer service team an A+.
Product itself arrived in good condition and matched exactly what we have been looking for. Will make using tie downs on our trailer much easier!
Just purchased two kayak 's and need a way to lock them up. So I mounted the brackets to the boats and was able to lock them to a heavy cable .
I looked EVERYWHERE for these tie downs with a solid base. Finally found them on etrailer. Very well made and worked like a charm for what I am building. These were the only solid ring tie downs that are 1 inch high to except multiple S hooks .
The product that I received is of great quality and the price was a lot better than any place I had found. The product was shipped in a timely fashion and packaged well.
This was the first time i have ordered with this company, and am happy to report that i was extremely satisfied. The tie down were exactly as shown and i have installed them with complete satisfaction. Most impressed with the speedy shipping. I had it sent regular shipping and it actually arrived 2 or 3 days before i antisapated them to. I will be shopping and referring customers. Thanks Mike D
Ordered and had a very quick delivery. Stainless steel anchors seem very strong and made very well. Have purchase from etrailer.com in the past will continue to do business with them in the future.
Top quality, very strong for its small size. Nice stainless and countersunk mounting screw holes made them look professional.
These stainless steel anchors were just what I was looking for. I couldn't find them anywhere else.
Hefty, tuff little guys. Well made, easy to install. I am sure they will work well.
D.c.
10/20/2017
Working well, very happy with them.
They are good.
Jose F.
12/1/2019
Great
These are a great item. strong and look great. Great price
So glad we found you, you guys have everything and fast delivery also! Wish I could buy stock in this company!
Products were reasonably priced and arrived as described. Ordered on Thursday and arrived the next Tuesday with economy shipping.
Havent mounted them yet. But i think they will work just fine. Most likely being getting more.
It was exactly what I wanted and the service could not be better.
Nice heavy duty hard to find.
You guys were great! Product arrived on time and it is of great quality.thank you
Great product, fast processing and ship ping
I received the anchors today and they are exactly what I needed. Excellent quality.
I'm hooked on these things. Nice product.
Do you have a question about this Tie Down Anchor?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Laura E.
3/18/2017
Thanks for your business and your review, Terry. I am glad you mentioned the stainless anchors attaching to your aluminum trailer. To avoid seizing from galling, you will need to use an anti-seize product like [Rachael, please recommend correct product] when combining stainless steel and aluminum.