Best 2023 Ford F-350 Super Duty Headache Racks

Was the right fit and all the parts were there ! I added the dot tape and I didn’t like the idea of splicing into the harness so I routed through the stake pocket and back to the bed plug ! It’s built pretty heavy duty ! I would of like the wires to be of better quality with a heavy rubber insulator but I put it in flex conduit. Just would’ve eliminated one more process! Took 18 min to install and another 30 for the lights ! etrailer made sure I had the right fit and product before it was shipped. They delivered faster than scheduled! I would definitely buy from them again!!!

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

I have bought a number of items from Etrailer and this was me was no exception excellent customer service, fast shipping, great communication, fair pricing. This headache rack is built very well it is the nicest one that I own. Easy to install, strong as nails, looks great, top notch. Very happy with B&W and Etrailer (Brittney W.)

Great Headache rack, bad service, poor communication, bad shipper communication.Received it 5 days late, etrailer never returned phone calls once!!!!! Stump, Texas

It only bolts down with two bolts. The bolts have vibrated loose several times. I have to check that it is secure often. Other then that, great product.

Very nice headache rack. The only down side to this particular model is you cannot go through a carwash with it on since it stands above the roof of the truck

I love the design and the quality. It looks just as I envisioned. It was definitely worth the extra money versus buying the similar but cheaper product from Amazon. It brought the truck's look to the next level.installation was easy and straight forward. Required no drilling or cutting.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Holes on the right side of rack itself weren't fully bored. Third brake light cut out doesn't quite line up. Product looks good otherwise, install was quick.

Click to Enlarge

2022 Tundra: Fit pretty well with the brackets sitting proud about an inch outside the top of the bed rail. I had to drill holes close to the outside of the bed rail to avoid the composite liner on the inside of the bed. you can look from beneath where you need to drill. I used the wire method to pull the bolt through the drill hole since there is no access. The kit provided with the rack was adequate. An 18mm socket would have helped. I cut one louver from the middle so that the rearview camera would not be obstructed. Its on and is sturdy!

Click to Enlarge

Very nice headache rack. The only down side to this particular model is you cannot go through a carwash with it on since it stands above the roof of the truck

Looks great and fits my 08 Tundra well. Good mount for my LED light bar. Not delighted with the mounting system since it required removing the interior stake pockets to get the locks to expand. Also wobbles quite a bit on dirt roads, since it isn't pulling on a lot of sheet metal from my bed. I have plans to add a base plate to stabilize the vibrations, then it will be an outstanding product.

I like it. One of the side brackets were bent a little bit but I straighten it out when I installed it it looks great now

Click to Enlarge

Click to Enlarge

Was the right fit and all the parts were there ! I added the dot tape and I didn’t like the idea of splicing into the harness so I routed through the stake pocket and back to the bed plug ! It’s built pretty heavy duty ! I would of like the wires to be of better quality with a heavy rubber insulator but I put it in flex conduit. Just would’ve eliminated one more process! Took 18 min to install and another 30 for the lights ! etrailer made sure I had the right fit and product before it was shipped. They delivered faster than scheduled! I would definitely buy from them again!!!

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Was the right fit and all the parts were there ! I added the dot tape and I didn’t like the idea of splicing into the harness so I routed through the stake pocket and back to the bed plug ! It’s built pretty heavy duty ! I would of like the wires to be of better quality with a heavy rubber insulator but I put it in flex conduit. Just would’ve eliminated one more process! Took 18 min to install and another 30 for the lights ! etrailer made sure I had the right fit and product before it was shipped. They delivered faster than scheduled! I would definitely buy from them again!!!

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

This headache looks great and has done its job great.

Assembly was fairly simple. I love the options that this rack has. The channel allows you to mount all kinds of accessories, which is nice. Not sure how much abuse it would take but so far I really like this rack.

Nice It looks a little high

Click to Enlarge

Shipment was excellent and the product was better than expected

Easy to install. I modified my install a bit to accommodate my tonneau cover by adding shim material on the bed rail under the headache rack. I also left out the center piece which is an option.

Click to Enlarge

This product is excellent !!!! I installed it in just 20 minutes. 3trailer is a trusting supplier !!!! Excellent Customer Service and Quality Products !!!! Thank you.

Click to Enlarge

Happy with the headache rack, was easy to install and looks great on my F450

Very nice headache rack. The only down side to this particular model is you cannot go through a carwash with it on since it stands above the roof of the truck

Very nice and heavy duty. Paint and welds were high quality Built to last. Very satisfied with this product. Installed on a reading body classic 2 9ft. Box

Click to Enlarge

Click to Enlarge

Click to Enlarge

This headache rack is all I expected it to be. High quality construction and easy to install. I would recommend this rack to anyone that pulls a gooseneck trailer. It works beautifully.

Worked just as planned.

Very nice headache rack. The only down side to this particular model is you cannot go through a carwash with it on since it stands above the roof of the truck

I'm giving 4 stars because the product itself it's good. etrailer got it to my city pretty quick. I don't know where in the line though since they use ups that my hardware got lost because the box was pretty damaged. I'm actually waiting to hear from etrailet when I'll get my hardware to install. Kind of sucky that once it got to my town it's been sitting for almost a month to get delivered to me and I just ended having to go pick it up anyways. Then to find out I still can't put on my truck because of poor shipping handling. The lady that helped me to hopefully get my hardware here was very nice and helpful. Let's just see how long it takes to get my hardware though.

Beyond expectations! Probably the best headache rack! Has a very solid mount to your truck that doesn't depend solely on the top rails, that's where most of headache racks cause stress cracks on the bed.

After doing research I decided on the B&W rack and I’m glad I did. Install was easy but I’d like to see them change a couple things. The rack is powder coated and I had to wire brush the bolts in order to thread the nuts on. Also I would like to see them have a pigtail for you wiring harness instead of having to splice into it. Other than that I would recommend this rack to anybody who wants a strong durable rack.

Click to Enlarge

This worked well

Easy installation and looks great

Overall I like the rack. I put it on a 2014 Toyota Tundra (Double Cab, 6.5' bed). It has worked well with no issues so far (a couple months), appears to be well built, lightweight, looks good. The load stops are useful and quick to adjust. It is a great value and is half the price of the other headache rack I was considering. I am dinging it a star for a couple reasons: 1. They could have done a better job with the way this thing attaches to the truck. The stake pocket rubber bushing thing is poorly conceived and difficult to line up correctly. For the drilled hole, I had to remove my rails to attach the bolt. 2. Parts of this rack are less robust than I'd like. The bottom panel (the part with the logo on it) is a pretty thin sheet of aluminum. The mesh is also pretty thin. Logo emblem is plastic.