Best 2021 Chrysler Pacifica Hitch Adapters

Looks like it should work

I ordered this adapter from e-Trailer so I could extend my bike rack past my spare tire on my 2005 Honda CRV. This solved my problem and this thing is well made to take the weight. I'm glad I purchased from e-trailer because I know now that they sell quality products as I have also purchased a new receiver, ball mount and 2' ball to pull my trailer. If your goal is quality, great service and fast shipping then e-Trailer is one company to go with.

My wife and I could not find this product anywhere....after spending 4hours going from store to store we found etrailer.com and bam! There it was the Verical Adapter we were searching for. The hitch is hidden under the bumper of our Chrysler Pacific thus needing the 90 degree adaptor......we needed this in which to mount our Bike Rack. Works great and highly recommend this adaptor. Our item was shipped the very next day and etrailer sent us tracking info...no problems and arrived on time. Will go to etrailer first next time!

The hitch adapter and 90 degree mount solved my desire to mount my electric wench on my auto trailer replacing the manual wench. See photo. The 2" sleeve would not come out of the existing 2" receiver so I used the hitch adapter to make the transition. The etrailer experts correctly told me there would be some play in this joint. However, it works here (as this is not for towing). I also used the 90 degree mount upside down (also not an approved application). But again no towing is involved. I did need to drill a new hole in the receiver.

It worked, till it didn't. It's a short smaller tube inside a larger tube, only held together by two spot welds. The spot welds split/detached allowing the inner sleeve free movement! I have a bike w stinger expanded to grip the inner tube and a little safety catch on outside. The safety catch was the only thing keeping my rack from sliding completely off! For the price this should've been a solid milled piece. Don't rely on these welds unless you have two through hitch pins one on car and one through the adapter end.

Based on an initial fit, the bike rack stinger is a bit loose in the reducer. If tightening the threaded pin does not reduce the wobble, I can add some shims since I intend to keep the reducer mounted on the bike rack. The reducer is an easy fit into the 2" receiver - the Quiet Hitch removed any movement.

I use the extender on my bike rack so I can access my tailgate and truck bed with the rack on. It does what it supposed to do and looks barely used although I travel to trails twice a week.

Good quality, heavy duty took a couple extra days to get here otherwise great product

I have a Can Am Defender and the actual hitch is up under the back end so when I hooked up a trailer, I couldn't raise or lower the trailer without the crank handle hitting the tail gate, now I have plenty clearance and I love it.

Works great and reasonably priced. etrailer Customer Service is absolutely the very best. My first shipment arrived missing the hitch extension. Customer Service quickly responded to my communications and shipped a replacement the same day. As you can see from the photo the hitch extender is perfect for my Polaris Ranger and allows me to use my small lawn n yard implements. I highly recommend etrailer.

Product was delivered on-time as expected. This adapter is being used on a Volvo XC60 with a retractable receiver. Although it fit in the receiver the locking hitch pin did go all the way thru without a little brute force. Not sure if it is a receiver, adapter, or a hitch pin problem. Would have been nice to have a little more guidance.

The part was for a 2025 Volvo XC60. It fits perfectly with the Volvo’s tow hitch. I can now use my bike rack without an issue.

Just received my 80307 Hitch Extender for 2" Trailer Hitches - 8" Long. My newly upsized spare tire had been preventing the use of my hitch rack. Was very pleased with the etrailer service and the ease of using the website. The excellent descriptions, photos, and even videos really help shopping for these types of specialty parts. Shipping went well and expediently. I trial fit the extension with my hitch rack today, and the photos are attached. It fit well and did the trick. I drove around and heard no rattles from it at all.

Appears to be well built and sturdy. I’m sure it will accomplish what ineeded

I got this hitch extender to put on my camper so that I could mount my bike rack. It worked like a charm!! The bike rack and bike were super solid on the trip cross country!!

Excellent support and delivery was excellent - as is always the case when dealing with E-Trailer staff.

This hitch worked well on my Kona electric. Etrailer provides outstanding service. Will definitely purchase from this quality company again.

High quality part! It was exactly what I needed. This is pretty easy to use with the only challenge being lining up the holes with the receiver and the hitch. Still pretty easy.

From purchase to delivery went well excellent job to all. God is great I give him all the praise for helping me get this done. I was in an accident which damaged my swing away hitch and Hollywood rv back rack.these are built very well I would recommend.

Swing away is built very well! Easy to use and price was good. Should have bought it along time ago.

This is going to be great to be able to swing out bikes out of the way so we can get in the back of the jeep.

Exactly what I was looking for. Can swing the bikes out of the way to access the truck bed. Locks back into position and I am not worried about it being secure.

Already have a Sris bike rack, has been an excellent rack and well be compatible with this hitch, both very well built

Built very strong, easy to install and operate. Using with Thule Apex XT 2 bike rack.

Shipped ahead of schedule in excellent condition. Kuat Pivot is built extremely well, heavy duty, and looks sharp.

I am very happy with this purchase. The swing out is well constructed and appears to be very durable. Other product reviewers comaplained their swing out would bend under pressure. I cannot envision this swing out every doing that. I like the FlatLock hitch feature that tightens the swing out to hitch connection.

The quality of the hitch adapter looks great and very stout.

Works great with our bike rack.

Product quality is fine, however, tried to use with an ebike rack on upper hitch and flat tow hitch on bottom. Vehicle sway at highway speeds was too much, and I found bike rack on back of the towed Jeep was better.

Works great. We're towing a jeep and have a bike rack behind our motor home.

Rattle’s excessively when there is not a load. the dual hitch is great. I am able to tow my trailer and carry my bike rack

Great double hitch adapter! Very well made and strong!

eTrailer has a great selection of products and excellent customer service. When my order got lost in transit, Brandy did a great job looking into my case, helping me reorder over the phone and keep in touch with me via email.

Perfect solution to adapting my hitch to my bike rack. The people at U Hall were very helpful.

Excellent extender! It has the wedge/ball that expands into the receiver creating a rock solid fit. I have the Kuat bike rack with 2 Trek e-bikes and this is just what we needed. It clears the sore tire on our jeep without sacrificing support and strength.

Special thanks to Madison for helping me out in a pinch. I needed this extender overnight and she made sure that I got it in time. As for the extender, its exactly what I was hoping it would be and more. Not only does the threaded hitch pin lock the extender in place from side to side, the ball bearing locks it into place from top to bottom; AND the receiving end of the hitch is double-walled for added strength. I am very impressed with the quality of the Rocky Mounts hitch extender. FYI - I used this to extend the bike rack past the over-sized spare (35") on my 2016 Jeep. Adding 2 pics to show. Thanks again Madison - great customer service!

This is a much higher quality (thick and heavy) than I imagined it would be; I'm pleasantly surprised. I'll be using it to mount a trailer hitch cargo carrier and a dog step at the same time when we go on long vacations.

The hitch has held up over Alaskan roads towing a jeep, but it does not sit level in the receiver so the tiny little bit that it sags is exaggerated when the tow bar is connected. Paint starting to peel with wear after a year.

I was surprised by just how solid and heavy it was made. Just what I needed to move my Bobcat UTV hitch back to I can use it as my yard dog to shift my trailers around and not worry about the plastic tailgate nor the plastic bed getting damaged. The hitch sits under the bed and this extends it out so it is useable.

Work great! I needed an extension due to my truck camper. It holds my heavy duty bike rack and 2 ebikes with no problems.