Most Popular Fixed Ball Mount for 2018 Ford Flex

Great product .Well made.I purchased the complete trailer package from E trailer.It arrived in under three days.I had it installed in less than two hours and added 12'of flex tubing for a professional result in organizing and protecting the wiring.E-trailers communication was great with info on installation for all parts of the process ,however I didn't need it as it was straight forward and very easy to understand.The Ball mount kit is kept in a bag alongside the Jack and is ready when I need it.Highly recommend.

I received and installed a hitch assembly as well as the tongue and ball kit for my 2014 Ford Flex. I watched the installation videos for the hitch and wiring. I installed the hitch myself without issue in less than 40 minutes. The wiring took a bit longer as finding acceptable wire "runs" in the light assembly is not as clear cut as the video would have you believe. Regardless, easy install, very pleased with the products and will buy from you again if needed. Thanks for the great product and delivery in less than one week.

Arrived fast as promised. Good quality part.

Works well

The hitch and ball mount are excellent quality. My concerns are twofold. The hitch is so heavy that I had to take it to my mechanic to have it installed. Minor cost and inconvenience, but the hitch for my previous F-150 was just as sturdy, but easy to install myself (albeit with higher ground clearance). My concern about the ball mount is that the factory told me erroneously that it could not be reversed for a drop, so I returned it. This order is for the replacement after I was finally correctly told it could be reversed and how to do that. Ball mount would have been a 3 for that reason, and overall hitch and ball mount quality a 5. So I averaged them.

I have two of these. My first I bought two years ago. I very highly recommend this Curt Class III Ballmount 2" Drop because of its price, durability and quality. I towed various class 3 loads with ease and confidence with this ballmount. It slides into the hitch and does its job without fail. It looks excellent after towing a load. etrailer's price is about as good as it gets and delivery is very speedy.

Was exactly as pictured and is a great product.

To be honest, I use it upside down. I needed a hitch with rise, but none were available at time of purchase, and yours, inverted, works perfectly! The welds are regularly checked and remain all secure. It's a good hitch.

This is a great all-purpose hitch. I've used it to mount a heavy-duty bike rack and a steel T-rack to carry a canoe as well as lumber. Most recently I hauled 5 x 8 cargo trailers full of plants, then furniture for a 600-mile move. It was simple to use, problem free, very strong and sturdy. Now that I live on some acreage, I see a trailer in my future, so this will get a lot more use. I drive a 2013 Tacoma, so this is a good size hitch at a good price with sufficient capacity for my needs. I do use a key lock for the hitch as well.

I actually got my hitch the date they said it would be here to my surprise. When the box arrived it was pretty much beat up, not the hitch just the box. I wished there was instructions how to install it. Overall very satisfied and will buy from 5hem again

We sold our small motor home and purchased a small travel trailer. This hitch provided a perfect solution to how to use our bike rack while towing the trailer. It even allows room for the pickup tailgate to be lowered without removing the bikes from the rack. The hitch is very hefty with a high weight limit - plenty for the GVW of the trailer (7,000#) plus 125# of rack and bikes.

This has been an amazing multipurpose ball mount. We purchased this to use with our Hollywood Bike Rack and also to connect onto our boat. We weren't sure if this would work, but it was awesome. It is very well built and We had to make some minor adjustments to the position of our boat on the trailer so the turning radius of the bike rack that was attached would clear the truck. This is very well made and solid.

Very happy with this ball mount - provides just the amount of drop we required for a level tow of our GeoPro travel trailer by our RAM2500. Plus, the extra length not only allows a tighter turning radius, but also allows us to lower the truck tailgate without having to detach the trailer. Huge improvement on all accounts for us compared to our prior setup. The product is well built and I'm confident will provide us years of good use.

Great customer service. Live in SC - ordered a hitch and USPS delivered it to PUERTO RICO. Go figure. Stacey A refunded my money - but 2 weeks later hitch appeared on my doorstep. All’s well that ends well.

I purchased the etrailer.com 2-3/4 " Rise or 4" Drop Ball Mount Kit, Curt Trailer Hitch Receiver and Twist-in 7-Pole RV-Style Trailer Connector for my 2011 Chevy Silverado. Quick Delivery! All the necessary parts arrived in perfect condition. Directions were spot on and the instructional videos were great.

WOW! What can I say? Easiest install ever! I called ahead of time and spoke with Katie about what I needed. She confirmed what I wanted would work with my van. I'm in the shipping business. The bar arrived in mint condition in a double wall box with the accessories boxed separately. After removing the hardware, reading the instructions and watching their video online, I went to work. The whole thing took less than 20 mins and I did not have to remove the exhaust. I actually used it to help hold the bar up. It took longer to remove the mud guard and rear body molding than to install. It is heavy, weighing in at about 65lbs but I did not even have to use a jack on the van. I'm very happy with my purchase and can now put bikes on the back of the van rather than in the van. I can tow our Cub Scout trailer and hall my sons football teams gear with the optional rear carrying racks. I also love the fact that the bar hides about 6" behind the bumper preventing injuries to the shins. The price was cheap and the install a breeze.

Love these. This is my third one. Wouldnt pull a trailer with anything else. Trannys are expensive.

As a full-time RVer, e-shopping is very important for us. etrailer was the right place to shop. Right product, delivered on-time for a great price. You beat the local discount RV store by $25 including shipping. At the same time, I had another outfit send me a clearly inferior product to the one they displayed. Said they would e-mail a pre-paid shipping label for the return (didn't) and tried to put the blame on Amazon. Thanks etrailer for a great experience !

Heavy duty , very good quality.

I haul a 5.5x10 open trailer w/ a 900 lb. ZTR, a push mower, and a handful of other tools 3 days a week. It is what it is. It does the job, no problem. A little finish wear and rust on the ball, but nothing major. I LIVE ON A DIRT ROAD, which is probably responsible for the wear.

Well made.

Seems to work as expected. Installs easily. I had a CURT drawbar for my other vehicle but they didn't have one in the Drop I need for my new car. I prefer the lock pin on that CURT model, it's feels heavier duty, than this so I just swapped them out.

Exactly what I needed. I bought this Mercury Mariner used and it had factory installed hitch with a 1 1/4 receiver. I needed a drawbar with a substantial drop to tow my utility trailer somewhat level. Local shops had lots of 2 inch drawbars with drops but no 1 1/4 and I was even told that they weren't made and I would have to use a 1 1/4-2 inch receiver adapter do get what I wanted. You folks had what I needed and it arrived quickly. I should have looked here first.

Product was excellent, complete and simple mounting instructions. Installed hitch in less than half hour. Looks great on the vehicle . Would order from E Trailer again. Thanks

Excellent quality and construction. Matches perfectly with my Curt hitch. Highly recommend. Also, etrailer has the best customer service of any online retailer I've ever shopped at.

Excellent Web site, easy to navigate, great prices, easy purchase experience, fast delivery. I had someone install the hitch - all good, looks great - no photo, but take my word - it looks great on my 2003 Buick Rendezvous. An easy, "Five Star" rating (Web sales experience and hitch).

Over all the ball mount kit is great. Getting two size ball mounts is convenient. Only complaint I have is the hairpin cotter pin fits somewhat loose. Not a great design there but the rest is great.

Etrailer is great. Good service!

No issues after one year of use. Happy with product

Excellent product! With the three different ball sizes, this tri-ball mount gives you a lot of flexibility. Gone are the days of having several different ball mounts to fit different tongues. High quality construction makes this an excellent investment.

This item should solve the problem I have had with a stainless 3-way ball when I tried to reverse the position on the ball mount. The threads galled between the hex nut and hitch ball.

My usage of your hitch is a bit unusual, I think. I pull a two ton roller with my Ram and I've used your cushioned hitch to smooth out the process. The roller Lunette just dropped over a 2" ball and then banged and jerked on the ball neck. Check out the photos for my adaptation.. I can flip it over and use the 2" ball! Have enclosed some photos. The cushion is holding up very well and it takes a beating!! Thanks

We have a Pink Tractor (google Mom's Pink Tractor) that we pull to events, mainly in Ks, Ok, Mo, and Ne. We have around 35 events a year we take the tractor to to promote breast cancer awareness. The other day my wife and I were leaving for an event, i had let a friend borrow the hitch to see how he liked it. In less then a mile from the house my wife started complaining about the trailer jerking. That is coming from a lady that really was upset when I paid that much for a hitch. She told me to stop and buy one. (a long and expensive trip, we had to stop at a casino so she could rest her neck) I could write a review with a lot of trailer talk, but, this story tells the story.

I just received the Kit for towing from my 2024 Jeep Grand Cherokee Overland 4xe and am very happy with it. I looked first at ordering the "factory" Mopar kit for it, but it was not in stock anywhere and was more expensive.

Like the product which seems very heavy-duty. The two ball mounts give me options for towing different trailers if I need it.

Used on my 1999 Dodge Intrepid's CURT 12006 Class II 1.25 in. Receiver Hitch: 350lbsTW/3500 lbs GTW. I use this Curt Class II Drawbar - 3-7/8" Rise - 11-1/4" Long - 3,500 lbs to tow a 3,500+ GTW dual axle trailer. I have used it with the trailer FULLY loaded and it performs EXCELLENT. You have to make sure the trailer is loaded correctly so as not to put too much down force on the tongue/drawbar. I was skeptical that the SOLID 1.25" bar would not take the load, but it is super strong. I chuck it in the trunk when not in use to protect passerby's shins, but it sticks out far enough clear the Intrepid's bumper, and is solid with a 2" ball (required a bushing). etrailer got it out fast at a good price! I would totally purchase this again from them.

Every part excellent quality. Perfect fit, all parts were exact for my vehicle. Watched the video on youtube for wiring and being a mechanic for over 50 years was able to connect signal lights all from driver side of harness. Instead of leaving plug inside trunk I wired through the rubber outlet to the back of the hitch ready for use. Very happy highly recommend etrailer.

Still performing excellently after a year. This draw bar is much stronger than we even need, but it gave us the two extra inches of length needed to clear the bumper, so we could install the Curt hitch-mounted clamp-on bike rack, also purchased here & working well.

Solid pc of towing equipment!