# 1
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
Fast Shipping
Installation was relatively easy. The hardware includes 6 fish wires that screw onto the threads of the bolts. Thought I might have to go buy them somewhere. And pulling bolt through the chassis was easier than I thought. The hardest part to the installation was reinstalling the muffler. The hitch is nearly flush with the edge of the bumper so you don't have to get a long insert. Some I saw online seem to be under the car and would require a longer insert. Bought the hitch with ball mounts and wiring harness. For DIYer its a piece of cake.
# 2
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
No complaints about this draw bar. Powder coat was nice and shiny. Holes were in the right place, and welds were solid.
Etrailer shipped my order the same day and the receiver is very well made and fit perfect.
# 3
Curt Ball Mount for 2" Hitches - 1" Rise, 2-1/4" Drop - 7-5/8" Long - 7,500 lbs
Everything fit perfect
This is a great all-purpose hitch. I've used it to mount a heavy-duty bike rack and a steel T-rack to carry a canoe as well as lumber. Most recently I hauled 5 x 8 cargo trailers full of plants, then furniture for a 600-mile move. It was simple to use, problem free, very strong and sturdy. Now that I live on some acreage, I see a trailer in my future, so this will get a lot more use. I drive a 2013 Tacoma, so this is a good size hitch at a good price with sufficient capacity for my needs. I do use a key lock for the hitch as well.
# 4
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
I bought this hitch to fit my 2017 Ford edge. I'm impressed with the quality and sturdy construction. I will be using it to haul a U-Haul trailer. I would certainly recommend this insert to anyone looking for a fairly priced solution.
GLORIOUS!!! Bought this item with zero experience, but much research. It is the best vehicle-related purchase I have ever made! Item performs exactly as advertised, even in spite of much abuse I have given it. Just because I could, I load tested it right at the edge of the max distributed towing weight, multiple times. No problems ever! Easy to install properly and safely!!! Well made construction! In my opinion, the best on the market at any price, but fortunately not the highest price by a pleasant margin!!!
# 5
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
To be honest, I use it upside down. I needed a hitch with rise, but none were available at time of purchase, and yours, inverted, works perfectly! The welds are regularly checked and remain all secure. It's a good hitch.
Working in the sand and grass of my driveway my wife and I installed our new etrailer receiver hitch. Great fit and finish! Went right on as described in the online guide. Hitch required a spacer washer on top back bolt attachment point. Taped it on so it would not move while lifting in place and it stayed right there! Used a car jack to raise up and hold the hitch into the underside of the trunk tighten the bolts and reattached the tail pipe done. Now we can pull our Sunfish Sailboat any where the car will go.
# 6
Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise, 1-1/4" Drop - 7" Long - 3.5K
Received my item very quickly, was packaged nicely. Would definitely recommend etrailer.com and purchase from them again.
I hooked up the draw bar today for the first time to the trailer that I built and the hitch I installed. The draw bar uses a cotter pin that slides on the bolt rather than going through a hole to mount the bar to the hitch. I have never used a sliding on pin in anything - I've only used those that go through a small hole matching the pin. This includes my farm tractor and other tools. I hope it is secure because it does slide on easily. The bar itself appears nice and strong.
# 7
Ball Mount 3/4" Rise or 2" Drop - 12-5/8" Long
Retail type stores only carry mainstream items so when I needed a special length ball mount for my 2011 Traverse I found the size and quality with Curt Products .
# 8
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
We really like the hitch we ordered for our Camry. It was extremely easy to install. Fit perfectly!
Wonderful product. I had the hitch installed in 10 minutes. The wiring was a little more tricky because it required running a power wire all the way to the battery. I towed my trailer from Florida to Tennessee and back. Etrailer is still wonderful to deal with as they always have been in the past. My hitch came in a couple of days. I wouldn't think of ordering from any one else.
# 9
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
I installed one of your Draw Tite trailer hitchs on my 2014 Ford Edge. However my carrier would not fold up without hitting my car. I just ordered a Draw Tite hitch for my wife's MKX and stumbled on this accessory which solved the problem. Hell to get old!
# 10
MaxxTow Adjustable-Height Ball Mount - 2" Hitch - 7-1/2" Drop, 6-1/4" Rise - 5,000 lb
This is exactly what I needed for my front end mounted receiver.
As advertised and quick delivery, I am an Etrailer fan!
# 11
Convert-A-Ball Dual-Cushioned, Adjustable Ball Mount - 7" Rise to 9-1/2" Drop - 5,000 lbs
A year has passed with my Convert-A-Ball Dual-Cushioned, Adjustable Ball Mount and I have nothing but praise for this mount. Once you find the correct height to have a perfectly level trailer there's no need to adjust. The beauty lies in the cushioning! Towing a Yamaha AR190 (3200lb boat and trailer combo) is silent. Even over the bumpiest pavement the tow is smooth. There is no harsh slamming when braking or taking off from the boat ramp. I don't know why everyone isn't running one of these, I wouldn't run any other hitch mount PERIOD! If you're on the fence, get off and buy one, you will NOT regret it!
We bought this to tow our 3,000 lbs. boat with our Subaru Ascent with a 5,000 lbs. towing capacity. With the OEM ball mount, we could really feel every jolt and jiggle from hard stops, going over bumps in the road, and trailering down dirt roads. However, the dual cushion ball has really improved our trailing experience. Once we get up to speed, we hardly notice we are towing our boat. It's also great because some of the lakes we visit are down dirt roads, and the cushion makes this a much more pleasant experience. I would highly recommend this to anyone towing a boat or larger trailer with a SUV as it maintains that comfortable ride and the jostling of the trailer is much less noticeable.
# 12
MaxxTow Ball Mount w/ 2" Accessory Receiver - 2" Hitches - 2-1/4" Drop - 5,000 lbs
Heavy duty , very good quality.
# 13
Curt Multi-Ball Adjustable Ball Mount for 2" Trailer Hitches
Very happy with the fit and finish of the product. What I like most is the extra extension it allows for with out derating. My problem centered on tailgate clearence when in the open position. Tailgate would contact the edge of the tounge jack. This solved that problem plus now I don't need to carry seperate ball mounts for my boat or enclosed trailer
Fits our VW Touareg perfectly and allows us to tow a variety of things now. As can be seen in the pictures the hitch has a +5-inch gap between the bumper and the vertical adjustment pillar and the trailer itself is out further so there's enough room to get to the rear hatch and maneuver the vehicle/trailer.
# 14
Curt Class II Drawbar - 5" Rise - 9-5/8" Long - 3,500 lbs
Overly tight on the receiver end bit functions as intended.
I am an infrequent trailer user, but getting my daughter home from college was necessary in March. This drawbar fits my hitch and utility trailer well, did exactly what it is supposed to do, and was the last thing to be concerned about right then. I have a '11 Mini Countryman S with a Class II receiver from Mini Fini, (which cost twice as much as a Curt) where the hole is flush with the fake grille near the bottom of the bumper cover, so I needed the long bar to reach out past the bumper. The Curt receiver for that car hangs visible underneath the bumper (ugly), which also increases the lever arm on the receiver beam and would have needed an even taller rise. (Curt take note!) All just part of the kit to create an occasional 1 ton pickup out of my Mini, leaving the "bed" at home most of the time.
# 15
Curt Ball Mount - 6" Rise, 8" Drop - 11-1/2" Long - 5,000 lbs
Again, Will the eTrailer rep really helped me get exactly what was needed for my application which was a little out of the ordinary. I could tell he had the knowledge and experience to direct me to the correct solution.
The team at etrailer relayed helped find the right solution. Using this ball mount fixed the height issue I had with my SUV not lining up with the trailer. Very grateful for their help.
# 16
Draw-Tite Ball Mount for 2" Hitches - 5" Rise, 6" Drop - 10-1/4" Long - 16K
This ball mount fit the SUV just right. I needed a 5 inch rise and the mount angled away from the bumper. However, the load capacity was way more than I needed, but the fit made up for that. It's a little loose in the receiver so I will be adding a stabalizer to lock it in place.
Did not work on my truck due to custom rear bumper. Looks great on my friend's 2018 F350 4 X 4 diesel!
# 17
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs
The Extra Long Ball Mount proved useful immediately upon receipt. Delivery was prompt, and the updates from etrailer.com helped plan transport of several bicycles, simultaneously with a camper trailer. The extended length facilitated use with a Swagman bicycle rack, also purchased via etrailer.com. The product arrived in excellent condition, with correct capacity rating, and works perfectly, and in conjunction with the bicycle rack. I recommend purchases from etrailer.
Works great solid product.
# 18
B&W Tow & Stow 3-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 10K - Black
I have used this hitch for about a year now. I have an 18' dovetail trailer that i mainly use this hitch for. This trailer has very little clearance at the lower edge of the dovetail. This hitch allows me to adjust this with the many different height adjustments provided by multiple holes. I also really like the way you can store the ball portion away from unknowing chin bones. Only word of caution I have is when you pull the pins to adjust/use the hitch, be ready for the ball portion to drop fast! It has some weight to it and can pinch/smash fingers. Ask me how I know. Overall great hitch.
# 19
Curt Fusion Ball Mount for 2" Hitches - 2" Ball - 2-1/4" Rise - 7,500 lbs
Follow directions. It is an easy install. Just takes time.
A very nice unit. It is all welded and looks to be very sturdy. It includes the pin and clip
# 20
Curt Ball Mount for 2" Hitches - 7" Rise, 8" Drop - 9-3/8" Long - 12,000 lbs
This ball mount has served it purpose well. I purchased a new travel trailer that is heavy enough to require a weight distribution hitch when using the factory installed Class III hitch on our Dodge RAM 2500. I decided to upgrade to a Class V hitch combined with this ball mount to take delivery of the TT in order to defer decisions about a WD hitch until the actual load conditions were known. The hour trip home with this setup worked very well. Once the trailer was outfitted I was able to determine the actual tongue weight of the loaded trailer and I decided to purchase an appropriately sized Reese Straight Line WD hitch. However, this ball mount comes in handy for moving the trailer short distances without hassling with the WD system. The purchase experience through etrailer.com was first rate.
I was surprised at the heft and quality of the ball mount. Shipping was fast, communication good, easy and informative website to use. Thanks etrailer, you have earned a new customer!
What our customers are saying:
"You folks are fast. Thank you very much."