Best 2015 GMC Terrain Trailer Hitch Ball Mounts

just as described on their web site. Fits the trailer hitch and very satisfied. Only thing I would recommend being purchased with the trailer hitch is instead of the normal pin with carter pin. I would advise purchasing a key locking pin so that no one can steal your draw-tite ball mount and also steal the replacement mount you purchase that slides into the slot when towing anything, People have had there College Logos stolen because they did not have a key locking pin to avoid anyone just walking up undoing the carter pin, pulling the pin and walking away with those and the hitch cover. So if ETRAILER.COM sells the locking pin I would purchase it from them instead of the normal pin.

Product was fine and did what it was supposed to do.

We sold our small motor home and purchased a small travel trailer. This hitch provided a perfect solution to how to use our bike rack while towing the trailer. It even allows room for the pickup tailgate to be lowered without removing the bikes from the rack. The hitch is very hefty with a high weight limit - plenty for the GVW of the trailer (7,000#) plus 125# of rack and bikes.

This has been an amazing multipurpose ball mount. We purchased this to use with our Hollywood Bike Rack and also to connect onto our boat. We weren't sure if this would work, but it was awesome. It is very well built and We had to make some minor adjustments to the position of our boat on the trailer so the turning radius of the bike rack that was attached would clear the truck. This is very well made and solid.

Worked perfectly. Super easy installation and it carried a U-haul 5x8 trailer 1000 miles with almost full capacity on tow-limits. A little disappointed that the connecting rod doesn't fit perfectly into the receiver hitch. So, when there is no weight on the ball mount, it is wobbly and makes an annoying metal-to-metal clinking noise whenever you go over a ditch. You can easily correct it with a piece of cardboard stuffing for cushioning or just take it off when not it use. Great piece of equipment, works perfectly! Super happy with the purchase.

This starter kit was exactly the size I needed for the hitch on my Trailblazer, and has held up beautifully this past year. I'm confident it will last for the lifetime of the vehicle.

Service from eTrailer was great, they even wrote to ensure I got the order correct when I ordered a different size hitch cover than the drawbar that I ordered. Picture attached of the somewhat unique application for the Euro style setup I’m using – I’m dragging my race tires to racing events with my 750HP Cobra!

Excellent fitment and gives my trailer a level stance.

I installed my hitch today. Everything went as planned no problems. Looks to be an excellent product can't wait to use it.

Ordered a complete hitch package for my GMC Terrain. Every piece was included and all of it was top notch quality. The fit was perfect and installation was a breeze. The wiring harness matched up perfectly with the OEM plugs, no splicing or crimping required. I highly recommend this company and its products.

Pleased with the drop hitch and both the 2" and the 2 5/16" ball. Will be using the bigger ball to move my travel trailer in the drive way. I've ordered from etrailer in the past and always satisfied with the products, as well as the customer service.

Well constructed ball mount, quality material. Perfect fit in the Reese Titan V hitch.

This draw bar in perfect for my John Deere X738 tractor. What I like about it is the ¾” rise it keep the draw bar height at about the same as the factory frame so the attachments height remain level. Thanks for the great product.

Not much you can say about a bar with a piece of flat metal welded to it; well made looks good. What is really important is that e-trailer is fast, friendly and knowledgeable. I've ordered from them anytime I needed a trailer/RV part.

I got a hitch for my Honda accord it was extremely easy to install took less time than they estimate after I installed it I bought a trailer and have hauled various things already with no problem I would recommend e trailer to anyone

I installed the trailer wiring and a friend helped install the hitch. Etrailer website is excellent. I got the right items on time and the fit is better than my wife’s dealer installed hitch. Videos on the etrailer site are clear and correct. One caveat, don’t try installing the hitch without at least one other person and having a way to lift the car(we used ramps) is a great help. The only possible way etrailer could be any more helpful is if they could recruit some local shops that would be willing to do the installation. I especially like having my wiring in the passenger compartment when not in use. It keeps it out of the Salt here in the northeast.

Purchased because I wanted something that looked a little better than the standard black ball mount and couldn’t find the size I wanted in aluminum. I used it 3 times last season and put it away for the winter in my garage. It was never on the truck while salt was on the road. Pulled it out the other day and it is a disgusting rusty mess. Attempts to clean off the rust were unsuccessful it was that bad. Total waste of money BTW the picture is post cleaning, it was even worse before

High-quality finish. Feels solid. Fit as described; we're using it in the raised position. Love those etrailer videos with their rulers and detailed measurements! They really helped me pinpoint the right product.

Easy to use and haven't had any trouble towing my small trailer with motorcycle on board. Def recommend.

This part came with the trailer hitch I purchased. It was very easy to transfer the ball from my 2" hitch and voila I am now ready to haul my trailer.

excellent, received in a timely manner, and was very easy to install

great

Used on my 1999 Dodge Intrepid's CURT 12006 Class II 1.25 in. Receiver Hitch: 350lbsTW/3500 lbs GTW. I use this Curt Class II Drawbar - 3-7/8" Rise - 11-1/4" Long - 3,500 lbs to tow a 3,500+ GTW dual axle trailer. I have used it with the trailer FULLY loaded and it performs EXCELLENT. You have to make sure the trailer is loaded correctly so as not to put too much down force on the tongue/drawbar. I was skeptical that the SOLID 1.25" bar would not take the load, but it is super strong. I chuck it in the trunk when not in use to protect passerby's shins, but it sticks out far enough clear the Intrepid's bumper, and is solid with a 2" ball (required a bushing). etrailer got it out fast at a good price! I would totally purchase this again from them.

Simple as a hammer. Solid steel and quite heavy duty for the intended class.

Meets my needs to a tee, works excellent on 2011 Terrain.

Look and quality of the mount is awesome. Beefy in size as well. If using on my particular application, removal of rear diffuser is necessary. If they had extended it another inch it woulda been perfect. 2015 Audi a3 tdi. Wouldn’t let me add a third pic but it’s a finger tip space between the ball and bumper with diffuser removed.

Nice solid (not hollow) and WELDED hitch. Have logged about 5,000 miles this year with no problems. I had many problems with bolted on balls, welded hitches are the way to go.

It works. I WOULD order from etrailer.com again.

No issues after one year of use. Happy with product

The whole process was as painless as it could possibly be. After reviewing my choices on their website, I ordered the trailer hitch by phone. Cathy was knowledgeable and efficient and everything I need was quickly ordered. Shipping time was short and I was very satisfied with the packaging. The hitch itself looked great. Installation instructions were clear and it is easily a do it yourself project. I had a local garage install mine and it took less than 15 minutes. ($25). The only "problem" I had was that the receiver I ordered came with a lock pin so I did not really need the separate pin I ordered. However, it's always good to have a spare.

Very pleased with etrailer. Very easy to order from website. Fast delivery, easy to install ,perfect fit . Thanks. .

Perfect fit for 2 inch Draw Tite receiver. good price, fast shipping.

from E-trailer...and once again I'm very satisfied! The package was delivered within a few days of ordering, all the contents were included, & the videos made for a flawless self-install (& I hate to admit it, but I'm not the most handy at things like that!). I have & will continue to refer friends & family to E-trailer for any future needs.

good value and quality. Came with 2" ball and pin.

Thank you etrailer for the quality products I received early last year. We needed a trailer hitch to install on our Subaru Forester for our move from Gig Harbor, WA to Spokane. We received the hitch hardware including the tow bar and electrical harness. The entire process took 4 hours. The installation process went off without a hitch (bun intended) using detailed videos I found online. Thank you etrailer.

Good price and works as it should.

Hitch is solid and install was 2 hours

Here's 2 photos of the finished product. Doesn't stick out very far which is fantastic, because it definitely would have looked bad on the back of a 2 door coupe GTP. As for installation, being a mechanic, all I had to do was remove 2 rear exhaust rubber hangers and the one right behind the fuel tank, lower the exhaust onto a set of jacks to support the weight. Then drilled 2 1/2" holes with a 90 degree drill. The coiled wires included with the parts saved me tons of time trying to get the bolts in. Overall, it was fairly simple to install. Torquing the bolts proved a little difficult. I would recommend you inform the customers that they'll need at least a 10" eye to eye reciever (I have the 11" one on mine) in order to clear the rear bumper and provide some space between the bumper and trailer tongue. As for the wiring, I cut a small slit in the rubber plug under the spare tire, ran some bulk trailer wiring up through it, under the tire, under the floor matting, to the right side of the trunk, behind the tail light. And up under the lid on the right side, is the tail light wire harness/connector. Test light confirmed which wires were hot, tapped into them and all the wires and lights are good to go. Just some extra info for the DIY'er that might be handy on the website so they won't have to search for it! Couldn't be happier with the hitch.

Rock Solid and so Smooth I can't give enough praise to this much needed item. I was in a rush to get this during the holidays because my previous mount was thrashed and I was going on a big trip. It shipped the same day at 4pm about an hour after I purchased it and arrived on the 5th day nicely packed and everything I ordered was there. My trip was over 200 miles with about 3,000 lbs on some rugged potholed fire-road bumpy terrain for most of it. I love the "cushion" feature... No more clankity clank - jerkity jerk from the hitch. I'm curious as to it's longevity before the cushion becomes sloppy and I plan on taking it all the way there. I also purchased the stainless interchangeable balls and say this is a must have. The 12" drop is perfect for an 8" lifted truck. This was my first experience with etrailer... And it won't be my last!

Arrived today. Fast shipping, and thank you for that! Seems to be a quality ball mount. Just what I needed to get the ball lower to tow my trailer. With this, now the top of the ball is at 16" where it needs to be. Custom built receiver on my old moving box van. Just need to weld on safety chain slots and paint it. Can't drop the lift gate with the receiver in (its pinned on both sides), but hey....I can tow now.