Best 2011 Ford Edge Trailer Lights

Your service was excellent. The trailer light I needed was well described at your website. The ordering process was easy. You sent an email notice that the order was processed and shipped on the same day - wow. It arrived quickly and is now installed. It works perfectly as expected. Much appreciated... GZ Westcliffe, Colorado

This is a great looking classic trailer brake/turn light, which I used on my homebuilt woody teardrop. The lamp is quick and easy to change . . just pop it out from the base, unplug it, and plug in the new one. Etrailer, as always, does a great job providing all the parts a builder needs!

The size was right, and the brightness of the LED light, let's people know there is a trailer in front of them, especially when braking, or making a turn

Much brighter than my previous tail lights. Easy to install. Would definitely buy again!

When my 7 year old utility trailer lost it's lights, I looked for a solution. The package came quickly and was easy to install. It was a good idea to include the wiring kit along with the Lights because I installed the lights first and discovered that the problem wasn't solved. I then rewired the entire harness and it all works well. I would recommend one change - instead of the wire nuts, add a waterproof heat sealing connection - I soldered my wire connections using a heat shrink wrap. Also - waterproof tap in connections for the side running lights would be helpful.

Always the best of quality and most complete package of trailer light replacements which is why I go to etrailer.com and am a repeat customer. These folks could write the book on how to give outstanding customer service and their people always friendly, professional and knowledgeable. This company is always a pleasure to do business with !!!!

I love the B&W gooseneck ball and hitch. There are so may different ways to setup from 5th wheel to gooseneck styles. I sold the truck that had the B&W hitch and regret not getting it in my new truck. If I could afford another new hitch it would be B&W for sure.

We were looking for lights that we could use on a trailer so it could be towed by a truck with either a 12 or 24 volt electrical system. These lights answer that need. They appear to be well made and are very bright.

They look great installed. Only recommendation I can make is to include crimp connectors at least for the side marker lights and perhaps a small length of protective wire wrap. All in all I’m very pleased.

Excellent product. My old trailer lights were corroded and only worked intermittently. I began trying to clean & repair them, but it was a major PIA. I realized I could buy a brand new set for a reasonable price. They arrived today. This afternoon I installed them with no difficulty. They work great! On-line ordering was clear and easy. Shipping was fast, etrailer kept me informed of my order status.

I had to replace the lights on my utility trailer. The Kit came complete with easy to follow directions. Everything matched up perfectly almost plug and play. It took about 3 hours to remove the old lights and install the new ones. The only extra thing I had to purchase was extra white ground wire. The length that came with the kit was a little short. All other wire was more than ample length. That is why it got 4 stars other than that minor thing it would have gotten 5 stars. I am not a big user but the people at e-trailer are professionals with great follow up. This is the 2nd time that I used them and I do not hesitate to recommend the company and people.

The light kit arrived quickly with good instructions. I'd done this installation several times before but with my '13 Ford Edge things were a little different. The online video was excellent and installation was a breeze. I don't know what else I could ask for.

Perfect fit for my Eagle boat trailer. FYI, I bot the lights hoping that the replacement would fix several lights out problems that made no sense. I installed the replacement light and everything started working. Great!

I ordered some replacement parts for my utility trailer. My experience could not have been better. First of all, I ordered on the phone, reaching a friendly voice. Quickly the order was processed, which was also followed up with a confirming email about the order. Not long after the order that day, I got a message from another associate who advised the order is shipped and would be arriving in just a few short days. When I got the order, the parts were carefully boxed to prevent damage. The quality of the parts was excellent. I installed the parts, and tested, finding them working as expected. It goes without saying my order experience was friendly, efficient and reliable. I would recommend others consider using this company. I would not hesitate to use them again in the future should I need anything they offer.

Should be more obvious that the pigtails aren’t included

Easily found the exact replacement on the website. Easy ordering process and delivered promptly. Very pleased.

Here is a picture of these in use on the front of my truck, its an unorthodox mounting place and its supposed to be used on a trailer but I really love these things and I have installed them onto another guys truck as well

Finished Product The 6 Amber LED's with clear lenses are now on my pickup. The 20 amber and red clears will outfit my trailer. I have attached a pic of the rear of my homesteader ez rider (which mainly hauls my atv)

I bought 3 lights (1) spare. I lost the brake light function on one about 9 months after installation. Lights are very bright and durable. Only negative, wires weren't labeled for function/usage.

Two of these lights were mounted on a rear hitch bike rack since the truck tail lights can't be seen with the bikes on the rack. I am extremely happy with the quality and brightness of the lights. Shipping was great and items were packed with care.

Awesome lights, nice and bright. Being able to add reverse lights to my boat trailer is very helpful on dark boat ramps. The Combo light that fits in my existing grommet was nice since there was no room to add an additional light.

This is the third boat trailer that I have used these lights on. While the backup lights aren't "daylight" bright they do a pretty good job. (it's my understanding that "back up lights" are regulated as to total light output) If you need more light you could always use a seperate "work light" in addition to your regular stop/turn/tail light assembly. One of the nice things about these lights is that they fit in the standard oval mounting hole as a regular oval tail light assembly. Another is that the "white" LED's turn "red" when the stop or turn function is activated. I like the fact that I can have (at least a fair amount) of light to aid in backing the trailer at night down those pesky dark boat ramps. They also come in handy to alert others that you are backing up. As a technical note: the back up light gets it's ground from inside the tail light NOT from the white (ground) wire from the back up light pigtail. I other words, if you apply power to the red wire and ground the white wire.......the backup light WILL NOT ILLUMINATE! That does not mean you have received a bad light from Etrailer. The white wire on the back up light pigtail (2 pin,....1 red and 1 white) IS NOT USED. You must use the white wire from the stop/turn/tail light pigtail (3 pin,...1 red, 1 white, and 1 black) as your ground for the back up light to work. The earlier version of this light had the grounds separated.

Going to lake and forgot to raise jack on trailer and bent jack at trailer and jack had a 45 degree slant / bend. replaced it with a " etrailer.com jack", more affordable than Walmart and Bass Pro !!!!!! Ordered reflective strips to place on back of boat motor , back of boat and trailer receiver. Etrailer.com prices are SO MUCH MORE lower than any other place I have found and / or shop at. With such a large inventory online, I'll be shopping here more often. AND shipping and service is FAST!!!!

Recently bought and refurbished trailer. Reflective tape went on easily and has held well! I was able to cut to size to fit between rails on trlr. I included a pic. at this point the trlr has close to 2,000 miles on it since installed and has been pressure cleaned once and not one loose piece of reflective tape.

I have 3rd set of optronics on one boat trailer and the second set on the other boat trailer. In the past year the boats were launched a total 12 times. These newer sets with the coated circuit boards and the 'lite pipes' are working better but not perfect. I have a few LEDs 'out on each side on each trailer. We lived in hope but I guess this is the best we can expect? Thanks Tom

Ordered light for my boat trailer it fit and is working great. Order came on time. I have used etrailer many times and they are always helpful

Packaging and lights are 100% professionally done! 4 stars because the hardware for the passenger side was not stainless steel and will probably rust out before the lights do.

After doing a google search for a passenger side rear tail light for my boat trailer, and looking at various websites, I finally found exactly what I needed on etrailer! The delivery was also very fast, plus etrailer reached out to me to make sure everything was OK and i was satisfied with my purchase.

I’ve had them on my boat trailer for over a year still working great Thanks, etrailer great product

Easy Install. Worked as expected. Appear to be waterproof.

I bought a couple more of these two-diode LED clearance lights to add some more lighting to the rear of my kayak trailer. They work nice and are easy to install in 3/4" holes that I drilled through a piece of aluminum angle. The trailer has orange clearance lights on the front sides, red clearance lights on the back sides, the stop/turn/parking lights on the back, three red clearance lights on the back, and a white LED license plate light. It's really lit up and very visible at night from the rear and sides. Thanks to etrailer.com for great products and services! My wife and I like to kayak, but we don't like to deal with putting our kayaks on roof racks on the top of a car. So I bought a used Load-Rite trailer that was designed to hold one Jet Ski, and added a frame made of slotted angle and 2x6 lumber to hold the kayaks, and a cargo box from Tractor Supply to hold kayak seats, life jackets, towels, sun-protection clothing, and some spare gear (ropes etc), and bought all new LED lighting from etrailer.com. The paddles are too long for the cargo box so they have to go in the car! The kayaks are tied down to the trailer with several ropes front and rear, so there is a lot of safety factor in the design....I don't worry about the kayaks coming off the trailer! The entire rig works great....when we return from a kayak trip we just back the trailer in the barn and it's ready to go for our next trip. I put a 5" diameter wheel on the trailer just behind the hitch so I can push it around on flat level surfaces. See the pictures.

Great addition to the basic, rear brake lights of a camp trailer. I added these LED RED to the brake/turn function, within the existing, small holes in the rear bumper--much more apparent when stopping/turning. These sealed LED lights are very common on larger trucks and trailers now. Easy to install and very robust assembly...priced right!

Great, wish: flush mount wires Good and bright, quality, but didn't come with a gasket and the wires coming off the board are higher than the edge. I had to cut exact holes for one and remove material for another to fit the wires and have the whole thing to mount flush on a flat surface.

This part I received (#STL69RRXB 091523) turns out not to fit. Further, after taking off the existing part I find the part number is (#STL69RB 121821)

These were designed as a clearance light application and at a great price. I bought them to use as turn signal lamps on my RZR. They are high quality and extremely bright when lit, so they work great for both applications. These guys have great parts at a great price and quick shipping. I would recommend them to anyone needing trailer/boat/lighting. Thanks guys.

I actually purchased these lights to use as a side marker light on my Jeep Wranglers after installing after market fenders. Lights have worked fantastic up to this point

Great, wish: flush mount wires Good and bright, quality, but didn't come with a gasket and the wires coming off the board are higher than the edge. I had to cut exact holes for one and remove material for another to fit the wires and have the whole thing to mount flush on a flat surface.

After one year of having the Thinline LED Trailer Tail Light I have not had any issues. This is attached to my jetski trailer and is used consistently, trailered throughout the summer loading and unloading into the water.

We were looking for lights that we could use on a trailer so it could be towed by a truck with either a 12 or 24 volt electrical system. These lights answer that need. They appear to be well made and are very bright.

I like the looks of the product was a ease to hook up and work great for what it is being used for. The light is being used in a MC9 tour bus that iam redoing I used it for the restroom light to let someone no the restroom is being used, the current light was in bad shape. The bus is 24 volts system and I rate it to be excelient and the fast delivery of the product to me and price Thanks Etrailer for your product