Most Popular Steel for 2009 Hummer H3

So easy a caveman can do it. Great material quality, etrailer was fast on shipping, and hd support ready if needed. I consider myself an intermediate mechanic sk I had no problems doing this by myself. Instructions were good, I modified to make some install details easier and emergency link better.

It was a bit hard to get help with the installation, but after I got it in it's been great. Took a trip from Wisconsin to Washington DC and back and it all went smoothly.

Couldn’t believe etrailer sent this 2nd day deliver for free but they did. Only reason I didn’t give it five stars is whoever pounded the two Hex nut, top lock flange, 1/2”-13, grade 5 nuts to make them into lock nuts pounded them to hard makin them impossible to tighten even half way, even with impact wrench. Barely got one back off and had to cut the other off. Replaced with a couple of nylocks, washers and blue locktite and all is good now. Not faulting etrailer any at all. This was on Curt. etrailer is excellent. Second time I’ve purchased from them and I’m sure it won’t be the last. Great people to do business with.

Very nice, i have used it 4 times flat towing my 89 Jeep Wrangler YJ over 1000 miles. Very happy and tows like there is nothing behind me, thanks for a fine product!!

Product shipped without one of the locking pins which caused me to question the overall quality of the product. I contacted etrailer regarding the missing locking pin and explained that the product was worthless without it and was assured that it would be sent immediately. It was sent out the same day with USPS with a one-week expected delivery! Keep in mind the original order (which was very heavy) was here in a couple of days. Given the major inconvenience, etrailer couldn't spring for some expedited shipping! Sad!

We have used this tow hitch / bar for over 12 months now. We have travelled from the west coast to the east coast, to Canada and Mexico, 10's of thousands of Miles. So much that the connectors to the base plate are starting to wear with all of the turns. The tow bar is still in very good condition. We only have 1 issue which is it can get a bit tight if the car is on an angle, either up or down, left to right. But this was a known issue prior to purchase and its very minor. I would buy again! Great product for the cost.

This tow bar is a beast! I'm replacing my existing one (same model) after over 20,000 miles of pulling a Jeep Cherokee behind a class A motorhome. It has taken a beating on a trip to Alaska and back to Texas, including an incident where the wind blew me off the road and put the Jeep on 2 wheels. A frost heave that bent the RV Tow receiver but not the tow bar. As well as a car driving into the back of the Jeep while I was towing at 65 mph. Can't say enough about the quality and durability of this product!

Excellent product. Towing 4 door Jeep Wrangler Sport.

Looks like a quality tow bar. However, I'm pretty disappointed because the ratings on it were very favorable. I just used it for the first time and it's EXTREMELY tight and difficult to get into or out of the storage position. I'm going to contact etrailer to see if there's something I can do or if it will loosen up over time. I don't want to start loosening bolts. If it stays this tight, my rating would go down to a 1.

Installed as expected as we prepared to leave our home, Disconnected with ease at the campsite. Repeated the process as we prepared to leave the campsite headed home. All facets operated as expected.

Towed a 4 door Rubicon with Dodge 2500 truck. The tow bar did great on the 2000+ mile trip. The bar is very easy to couple and uncouple.

This is one of the best, two items I purchased of about 6 or 7 items acquired to rig my 2001 GMC YukonXL for flat towing. The 10,000 lb capacity is valued. the tow bar slides work well. the 3/4inch pins are strong and I have had no problems. The tow bar pulls a YukonXL with some extra stuff, fuel and tools and weighs probably 6,500 lbs (my est--haven't put it on a CAT scale). When I rig my 2020 Chev Silverado Trail Boss to flat tow, I expect to be able to use this.

Easy to install in place of an old Falcon towbar. As you can see in the photo it can be rotated to the side and latched in place. I needed this feature as we carry two electric bikes above the towbar. looking foward to not needing a rubber hammer to release the tension on the bars.

The product quality is excellent and very easy to use. We've had no issues with the installation or towing our F150 behind our motorhome. Easy to remove or attach with just one person.

If you are thinking of towing a car this is the company to see. Just installed a base plate and tow bar to my Toyota. Took just 2 hours. With the video and instructions, no problems, very easy. Customer support excellent, very helpful. If you don’t think that you can do this install yourself, think again. I would recommend this tow bar, with the telescoping arms connecting to the car is very simple and secure. This is a 5 star product. Thank You

I decided to use an antique Blue Ox tow bar to pull my Mini Cooper behind our RV on a trip to Panama City beach last year. Big Mistake! If it looks questionable, don't use it. When we arrived I was extremely thankful that the Mini was still with us. The old Blue Ox bar was coming apart. I looked locally for a replacement and found one at Camping World and was shocked at the price. eTrailer had the exact same unit for hundreds and hundreds less. And they shipped it quickly right to the camp ground. The Roadmaster Falcon 2 tow bar is very easy to us and mated right up to the Blue Ox kit on the Mini. Thanks eTrailer! We will definitely buy from you again!

Great product

First time flat tower so can't compare it to any others. Installs easily and stows out of the way nicely. Build quality looks Very good and look forward to our trip. I've only done parking lot test drives.

Great purchase and suggestion from etrailer. This thing is so easy to hook up to the Jeep and we couldn't be happier. We've only towed a few times, but already the wife has taken over hooking up the tow bar while I hook up the Brake Buddy in the Jeep. Easy to hook up, just as easy to disconnect after you arrive. I wish we had done this years ago!

After owning another name brand tow bar and experiencing a. complete and catastrophic failure of one of the arms resulting in extensive damage and costly repair to both TOAD and the rear of the motorhome I discarded the remains and purchased a Demco Excali-bar. I couldn't have been happier. Being ever mindful of what happened in the past, I can now tow with complete confidence. It is easier to hook-up, is reliable and I have had no worry about any failure, My go to tow bar.

Everything arrived timely and well packed. Upon opening, all contents were there and in great shape.Extremely good service! I would order again from etrailer!

Demco has made MANY improvements over the original Excalibar I purchased 18 years ago. Some of the changes have been with the safety cables being better organized; the main 'towing' bolt being perpendicular to the towing pull tension; being able to adjust the assembly to accommodate a more level alignment between the powered and towed vehicles by 'flipping' or turning over the yoke. Also, it is much easier to store the assembly with the newer pin and plate arrangement, instead of the previous pin system which required getting on the ground and attempting to pin the shaft to secure the tow arms. In addition, the tow arms now have the ability to hold themselves up while you are in the process of disconnecting the tow bar from the powered vehicle. I have not towed my truck behind my motorhome as of yet, so I can't say how it will disengage and be non-binding on the arms for storage. One of the issues I had with the old Excalibar was being somewhat difficult to release and disengage after a trip. Hopefully, that issue has been resolved.

The Demco Excali-bar 3 is proving to be a great purchase. Having owned a previous model Demco, I am very pleased with the current model Excali-bar's new improvements!

The wiring kit for the tow base kit was very well engineered and works very well. The videos for installing the base plate we're awesome step by step process and was very easily accomplished by someone with just a wrench and a drill and a few tools.

Would have gave it a full 5 stars if it would have actually fit into the receiver. Tried both my extension receiver and the OEM 2 inch receiver. Would not budge. Had to grind off the powder coating and then some. Now I need to then repaint to prevent rusting. I would have returned this if I didn’t need it now. Better quality control is needed on the e trailer brand. Guess I know it won’t rattle, lol. Buy a mainstream brand.

Nice, solid product. Easy to install and remove. Sliding action is very smooth, easy to extend and fold. My hitch coupler is slightly different design than shown but seems very heavy duty.

Absolutely fabulous

etrailer has been just what I need it as a first time tower of a Rv tow car there experience and courtesy of helping someone with no experience has been a huge relief with something so important there help was invaluable all the way through Thank you so much

Very easy to use and handled as well as I expected.

Very rugged tow bar. You will need this cover: Roadmaster Tow Bar Cover Item # RM-055-3 because the arms don't lock in the short position so they just slide out to the extended lock position when stowed without a cover.

Have not used this yet but it gives me all the features I was looking for including the 1.5 inch lift . Note that the unit came in the lower position so if you need height you have to reverse the head. It is not that hard to do and just take your time and connect to the back end of the Rv to start the process.

First, this bar is extremely heavy, which makes transporting and maneuvering cumbersome and difficult. Secondly, I had issues with this unit from the get-go. I did not receive the correct bolts to attach the Roadmaster clevis to the arm ends. The instructions clearly state that a clevis bolt was to be installed with the XHD unit, but it was not in the hardware bag. I had to call customer service (which was so/so, almost like the person didn't believe me) and had the bolts sent to me. I received the bolts but long story short, they were too short. They did not come out of the bottom of the locknut and any attempt to torque them to the point they did protrude, caused the forks of the clevis to bend, which is too much stress on such an important piece. I did not feel it was safe to either have the bolts not protrude, or force them to protrude. Then came the days-long process of trying to rectify the situation. I called customer service and attempted to explain the problem to the rep. She didn't really want to hear my problem and I was quickly rushed off the phone and directed to call Roadmaster for support, which I did. Roadmaster, of course, has nothing to do with this bar, or problem (pictures were sent to RM) and I was directed to call eTrailer back. I spoke to another person and she was a little more helpful. However, during our "conversation," I could hardly get a word in (I was spoken over and interrupted constantly.) I was told that #1.) the first person I talked to had no idea what she was talking about #2.) Demco manufactures these parts, not Roadmaster, #3.) Essentially the correct length bolts don't exist in the parts catalog. At this point I am starting to get upset with my experience and just wanted a tow bar that worked. I was convinced to but a Roadmaster branded tow bar to avoid any more issues (Blackhawk All Terrain) which I found to be strange, I figured the margin on the eTrailer branded products would be higher, but I digress. Since there is no exchange program with eTrailer, I had to purchase the Blackhawk outright. I was given a UPS label to send the XHD back, but I had to wait to receive the Blackhawk to reuse the box, which is not a huge deal, a minor inconvenience at this point. As of today (4/26/24) I am still waiting for a refund on this unit which I was assured it would be on it's way once the tracking number showed that it was picked up by UPS, but this is not the case. In conclusion, the XHD seemed like it would be a decent product if they can get the hardware right (at least for the Roadmaster system) it's just heavier than most tow bars I have had experience with. eTrailer.com customer service can also use some work, I was not happy with the service after the sale I received. Oh, and the final kick in the tail, the Blackhawk does not come with safety cables. If this were my company, I would have thrown those in for the inconvenience, but I was offered nothing for the trouble this has caused, no discount on the Blackhawk, cables or anything. I will do all I can to avoid buying from etrailer again and will direct others to the same.

Was simple to install. The only hard part was installing the backing nut with the wire handle. That could be done different.

Good design but poorly manufactured. Used on a single, multi-week trip: Bar stayed on the RV. Removed when we got home and the powder-coating has cracked and bar is showing rust inside and out. Chrome on extending arms is pitted and beginning to rust. Emailed etrailer but Cody informed me that I would have to ship it back at my expense without any commitment to replace! Disappointed with etrailer after years of previous purchases

Instructions for the adapter were incomplete, with no instructions on whether to torque the bolts or leave with some play. Haven't used the tow bar yet, but easy to assemble.