# 1
U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts
Product as described it was a perfect fit. etrailer is the best way to buy trailer parts. Superfast shipping and great costomer service.
Replaceing damaged parts on my flat trailer after the Campfire. Axles springs hangers etc were compromised by the tire’s catching fire. etrailer had all of the exact same parts at great prices. All shipped to my house. My trailer will soon be back in commission basically had to replace everything under the frame. Thanks etrailer
# 2
Dexter Trailer Springs Over-Under Conversion Kit
Very easy to install. Be sure to weld the top of the axle as stated.
The lift worked out perfectly,I had the place where I bought the trailer install them because I didn't have a welder to weld the saddle mounts to the axle and that's a must for a safe installation,also I had the place where I bought the trailer do it because they had the capability to align the axle perfect to the trailer after the installation. The lift added approximately 5 inches to the trailer hight so I could install the off road wheels and tires.The lift didn't affect the handling of the trailer at all.
# 3
Dexter Trailer Springs Over-Under Conversion Kit
Great kit! Installed this on my 1995 Jayco Fifth Wheel and it really improved the ride height with my truck. It’s been on 2 round trips from Texas to Montana since and many other trips locally with no issues.
It has worked great for lowering my boat trailer at shallow boat ramps. Don’t have to back half away across the river to launch or retrieve my Lowe Roughneck.
# 4
Nylon Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long
Excellent service and quick delivery and great price, all looks good, thanks for helping me out with these items that I can't find around my area anymore,AES
Bushings quiet the trailer for a short period of time. Bushings wear out and squeaks return quicker than I expected.
# 5
2" Square Trailer U-Bolt (Qty 2)
Melissa T Provided excellent customer service. I Would recommend to everyone use etrailer.
Great Experience! When I noticed that the leaf springs on my 44 year old boat trailer had cracked I thought I would never find replacements. I fully expected to have to have something custom built. I was amazed when I found the fantastic diagrams/descriptions dimensions for replacement springs on etrailer.com The phone support person was wonderfully helpful in confirming if items were in stock and ready to ship. The replacement springs arrived on time and everything bolted up perfectly! Thanks for such a great site!
# 6
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 7/8" Rear
Excellent, had everything I needed and more for my trailer. Everything fit well!
I ordered replacement leaf springs for my trailer using the instructions provided by etrailer. The correct items were shipped and they fit perfectly! The mounting hardware was exactly what was needed. No extra parts were needed as in run to the local hardware store! The springs went in with no problems. I would absolutely buy from etrailer again as their customer service was excellent as was the products.
# 7
Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
Detailed delivery information
Bought many parts, wheels & tires for a small horse trailer restoration project. Received everything purchased quick and all parts were perfect. Made the job go as smoothly as a 25 year old trailer restoration can go.
# 8
Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs
I really wanted to give this kit a 5 star review, however it fell short in more than one way. The parts are very nice and heavy duty looking and went together purrty good. However, when I went to grease the shackles none took grease it just came out around the fitting, so I changed the end on my grease gun thinking it was just worn out, still same problem. I had to hold the fitting on the zirk as hard as I could and finally got them to take grease, one still hasn't taken grease and not sure what I'm going to do. I left all hardware loose to this point to make sure there was no un nessesary pressure on anything hoping it would take grease easy. It's like the heads of the zirks are a size to small. After greasing everything the best I could I tightened everything up, during this process I had 2 nuts that the threads pulled out of... Just as they got tight they started to loosen up, I was using a standard length 1\2 drive craftsman ratchet, and I'm not hulk. I ended up having a few nuts and washers that worked but still this shouldn't have happened. Makes me wonder about the rest of the metals strength. Looks heavy duty but I'm starting to wonder about longevity.
After receiving my shipment yesterday, I was concerned that parts may have been missing due to the shape of the shipping box and the lack of packing material. During the installation of the shackles, the third shackle nuts/bolts stripped out when tightened by hand. The shackle had to be cut off since the nuts could not be properly tightened. I have emailed etrailer with this issue and hopefully we can resolve the issue quickly.
# 9
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
I won't shop anywhere else! Excellent customer service. Huge selection. Prompt delivery. Everything I needed for my custom flatbed trailer (single axle,7000#).
Good kit with the necessary parts to replace leaf spring suspension. I welded the hangers rather than bolting them. The parts are not coated for the price point so you will need to paint them or they will rust immediately.
# 10
Front/Center/Rear Hanger for Double-Eye Springs - 3-1/4" Tall - 9/16" Bolt Hole
Overall, the brackets are as specified and appear to be a quality metal. I’m not sure if it’s by design, but the inside width of the legs at the bolt holes are slightly wider (1/8”) than the inside width at the top at the bend. But I guess that is better than it being tighter to get the leaf spring into it.
I only received the spring hanger, but not the suspension kit both ordered and picked at same time. I’m still waiting on the moride suspension kit
# 11
Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 6-1/8" Long - 9/16" Center Hole
Brandon was very knowledgeable about what I would need to replace my axles and springs, right down to the sizes for bushings and bolts. I have been using trailer for many years because their service is awesome.
Excellent service and prices. Needed to replace curved equalizer, shackles and bolts, nylon spring bushings, u-bolts, and wheel bearing seals on my sailboat trailer. etrailer had everything and shipped it fast. Staff at etrailer was excellent!
# 12
Swan-Shaped Equalizer for 2" Wide Slipper Springs - 10-1/8" Long - 7/8" Center Hole
Your knowledge of the parts was excellent my trailer is an older model and I was concerned on receiving the correct parts. Thankfully they are a prefect fit and the delivery was right on time. Thanks John
I think that the one pictured is nice and shinny black And the one I received is rusty
# 13
Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear, 3-5/8" Center
Brackets came not bent enough and bolt nuts are oval shapped and won't thread because of this. Pretty disappointing I will call customer support soon for replacement
Kit is supposed to be for 1-3/4" springs but the center hangers were for 2", they said they would reship but after a week it still hasnt shipped out. Looks like fair quality stuff just packaged wrong in China!
# 14
Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 10-1/8" Long Equalizers
Added a third 7000 lb axle to our 14000 lb trailer. Easy to install, fit perfectly. Handles the weight better.
If I were to rate this product I would want to say it was better than excellent. Very impressed with your products. definitely beyond my expectation. If fact I ordered brakes for the trailer the very day I received slipper springs kit.
# 15
Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front/Rear, 2-1/2" Center
Great fit. I called to ask what I needed and etrailer made the right suggestions. Fast and friendly service for you trailer needs.
When the first package came, there were parts missing. I contacted the company, and they immediately corrected the issue. Thank you for caring about your customers.
# 16
Rear Hanger with Bushing for Single Axle Trailer Suspensions with 1-3/4" Double Eye Springs
I think etrailer is Great. I think their customer service is fantastic. My wife and I were in Arkansas, 1200 miles from our home in Ft. Myers Florida. I replaced the original springs on our trailer with new heavy duty springs, but never changed the hangers or bolts. Our trailer was riding very poorly, we needed new hangers and bolts badly because we were headed on a very long 9000-mile trip with many stops all the way to the Monterey CA. etrailer found us a UPS Store along our route to send us the parts that we needed. Many thanks to etrailer for great parts and Fantastic customer service and for helping us with our most Wonderful Adventure!
Excellent quality. Far better than the ones I had to cut off my utility trailer (one of the old ones was broken).
# 17
U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts
Good bolts
Exactly what I needed, such an easy upgrade with new heavier springs and the wet bolt upgrade kit. etrailer techs helped answer some questions to be sure I got exactly what I needed.
# 18
Bronze Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long - Qty 1
Easy to install. Saw in one of etrailers videos that this bronze bushing should replace the nylon bushing in the leaf springs we got. The nylon ones pounded out okay and these bronze bushings were a nice, tight fit back in.
Purchased a Dexter leaf spring. Thought it came with bronze bushings, they were nylon. No biggie, they were in stock and arrived 2 days later. Perfect fit. Thanks guys!
# 19
Replacement Shackle Strap - 2-5/8" Long
Excellent replacement component. Worked well to replace the 5 year old worn shackle from our enclosed trailer
I was very disappointed when I received the shipment from etrailer and only half the parts were there. When I made the order I was told everything was in stock and would be shipped.
# 20
Spring Seat for Typical 2,000-lb, Round Trailer Axles with 1-3/4" Diameter - Qty 1
These nests are kind of hard to get wrong really. I welded them into position, haven’t thought about them since. So,… I mean,… that’s good right?
I havent really gotten a chance to use the trailer much since my purchase of the leaf springs. But they went on perfect and the stance is perfect. With a weight load , they should be just right.
What our customers are saying:
"In these days of customer "no service" I am usually disapointed when doing business with people I don't know. It was refreshing doing business with you. I'm impressed!"