# 1
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Well built hitch just the right amount of drop for my 2014 Yukon.
Excellent quality, fast shipping. Finding a metric ball for our international application was a bit difficult. We knew etrailer was the place to go for all things "trailer" related. Very happy with the purchase!
# 2
Convert-A-Ball Ball Mount for 2" Hitches - 8-3/4" Rise - 10" Drop - 8,000 lbs
Shipped fast once the order was processed (thanks to help from customer service). Hitch, ball, and pins look great! I will order from etrailer again if I need anything. Great website!
Very fast shipping. Very pleased with this heavy duty drop hitch. I traded vehicles to a GMC Yukon and had difficulty finding a 10 inch drop to pull my 16 foot retro travel trailer. I was so pleased that I immediately ordered a couple more things from etrailer.com. Thanks!
# 3
Convert-A-Ball Ball Mount for 2" Hitches - 6-3/4" Rise, 8" Drop - 10,000 lbs
Shipped fast once the order was processed (thanks to help from customer service). Hitch, ball, and pins look great! I will order from etrailer again if I need anything. Great website!
I sought this concept out to cure how rough my trailers were pulling behind my Yukon. This made a huge difference when I upgraded to it from a standard, non-shock absorbing receiver. I use this with a 21' boat & a 18' flatbed - would recommend it highly.
# 4
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
Haven’t used it yet, but looks good. I’m not sure what height offset I need, so this kit gives me several options, plus two ball sizes. Really good value.
I installed the draw tite hitch onto my brand new 2018 Subaru outback. I'm 68 years old, not as strong as I was, but proud to say I did the job all by myself in about 4 hours. Here are some tips you may find useful. Watch the video-it’s pretty good. I had difficulty getting the exhaust system down and worried about getting it up again from the moment I got it down...read on-help will follow. I bought a stepup drill bit which worked great for drilling the hole in the chasis. I clamped the hitch onto a floor jack, then rolled it and raised it into position. Used metal shears to easily cut out the heat shield as per the video. Your inclination will be the screw the fishing tool provided all the way up the carriage bolt. That won’t work; just screw it on to the tip of the bolt. I couln’t get the exhaust hangars in place even after lubricating them with wd-40. I dropped the rubber hangars into undiluted liquid car wash soap which made them much more slippery than the wd-40. After that the rubber hangars slipped into place pretty easily-that’s my best tip. Finding the electric connection plug for the wiring harness was almost as hard as installing the hitch. I was very happy with how the job came out. Good luck.
# 5
Convert-A-Ball Ball Mount for 2" Hitches - 10-3/4" Rise, 12" Drop - 7,000 lbs
Very solid. Use to flat tow my Jeep behind our Yukon.
This fits my GMC Yukon with the receiver coming out of the bumper perfectly. My trailer now rides level.
# 6
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
This dual hitch got done what I needed it to do. If there is a downside, it's that I had to take my bicycle off of the rack, then take the rack off of the hitch, to take the trailer off of my pickup. This was inconvenient when at a motel with limited parking where I couldn't pull through 2 spaces to park as a unit. This would, of course, add about 4" of height. I needed a 4" drop on the one I have for my Yukon (dual receiver), which allowed that trailer removal. Take this as an observation, not a complaint.
I purchased the Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers and it arrived in a few days and fit perfectly. I'm very happy with my purchase
# 7
MaxxTow Ball Mount w/ 2" Accessory Receiver - 2" Hitches - 2-1/4" Drop - 5,000 lbs
Heavy duty , very good quality.
# 8
Draw-Tite Ball Mount for 2" Hitch - 7" Rise, 8" Drop - 9-1/2" Long - 12,000 lbs
Heavy Duty Drop Down Hitch no problem pulling a 10,000# trailer
It fits perfect on my f350 diesel, super heavy duty. I'll be using it for towing my car tilt bed trailer.
# 9
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
Well built hitch just the right amount of drop for my 2014 Yukon.
Sara R was helpful helping me find the right hitch for what I described as needing. I was excited to see the hitch pin in my order details even though I didn't order it. Sadly, the picture gave me a false impression. Overall, excellent customer service and product.
# 10
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
Great product and great price. Perfect addition for my new hitch
With my 2015 Yukon Denali I needed a 9 inch drop trailer hitch ball mount for my utility trailer. The one I found on etrailer.com (C45112) is great. Heavy duty, great finish - still like new after a year of use.
# 11
etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs
It did the trick, although it is starting to rust.
I purchased the etrailer.com 2-3/4 " Rise or 4" Drop Ball Mount Kit, Curt Trailer Hitch Receiver and Twist-in 7-Pole RV-Style Trailer Connector for my 2011 Chevy Silverado. Quick Delivery! All the necessary parts arrived in perfect condition. Directions were spot on and the instructional videos were great.
# 12
Cushioned Ball Mount for 2" Hitches - 4-3/4" Rise - 6" Drop - 10,000 lbs
I sought this concept out to cure how rough my trailers were pulling behind my Yukon. This made a huge difference when I upgraded to it from a standard, non-shock absorbing receiver. I use this with a 21' boat & a 18' flatbed - would recommend it highly.
Shipped fast once the order was processed (thanks to help from customer service). Hitch, ball, and pins look great! I will order from etrailer again if I need anything. Great website!
# 13
Curt Ball Mount for 2" Hitches - 7" Rise, 8-1/4" Drop - 9-3/8" Long - 10,000 lbs
After a year the mount shows no wear at all I would recommend this product to any one needing a good hitch mount, with a large rise and drop.
Was needing a 7-8 inch ride for my camper that could sustain a GVW of at least 5000 lbs. Let me say, it’s a hard to find item. Thankfully I called Etraer and with some research, found me the perfect ball mount. It’s heavy duty for a reasonable price.
# 14
Convert-A-Ball Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 10,000 lbs
Shipped fast once the order was processed (thanks to help from customer service). Hitch, ball, and pins look great! I will order from etrailer again if I need anything. Great website!
I sought this concept out to cure how rough my trailers were pulling behind my Yukon. This made a huge difference when I upgraded to it from a standard, non-shock absorbing receiver. I use this with a 21' boat & a 18' flatbed - would recommend it highly.
# 15
Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs
Shipped fast once the order was processed (thanks to help from customer service). Hitch, ball, and pins look great! I will order from etrailer again if I need anything. Great website!
I sought this concept out to cure how rough my trailers were pulling behind my Yukon. This made a huge difference when I upgraded to it from a standard, non-shock absorbing receiver. I use this with a 21' boat & a 18' flatbed - would recommend it highly.
# 16
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 11-1/4" Long - 10K
Well built hitch just the right amount of drop for my 2014 Yukon.
Did not fit my application been sitting on a shelf
# 17
Curt Multi-Ball Mount w/ Tow Hook for 2" Hitches
Cool to follow up on your product. The multi-ball works as it should. I bought it since I didn't know if the trailer I would get would be 2" or 2 1/4. I tow a 4,000 # trailer/race car with it. It's a heavy piece to carry around, but I feel that it will last a good many years. I did make a spacer to cram into the receiver, so the hitch doesn't rattle as much. Otherwise it's great. Tim E.
the packaging showed up as a mess, need to see if its damaged when I open it
# 18
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 9-1/4" Long - 7,500 lbs
With my 2015 Yukon Denali I needed a 9 inch drop trailer hitch ball mount for my utility trailer. The one I found on etrailer.com (C45112) is great. Heavy duty, great finish - still like new after a year of use.
Completely satisfied with product performance and eTrailer Corp’s action to upgrade my shipping to 3-5day delivery providing me the opportunity to start my fishing season at least 1week earlier than expected! The Curt hitch performed beyond my expectations for quality and workmanship! Thank you eTrailer!!!
What our customers are saying:
"WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!"