Most Popular - 2 Inch for 1998 Ford Explorer

It's nice to be able to ajust the hight an the ball size & the storage bag adds a nice touch

I bought this product along with the trailer hitch and wiring harness. No issues with anything provided. I installed the kit on a Saturday and was towing a trailer 800 miles on Monday. Great website, I highly recommend Etrailer to anyone needing trailer items and accessories.

Like the other items I ordered this arrived 2 days early and fit perfectly and is exactly what I needed for my 98 Explorer for towing a car trailer.....

Didn't realize that the unit came with a pin and clip so I ordered one. Now I have 2. No problem. Good product and it was delivered 2 days earlier than anticipated!

Exactly what I needed to tow my boat trailer. So easy to find on web site and a very quick delivery time. Very pleased with the entire purchase process and quality of product.

Product delivered in a timely manner and I really like that it was already assembled and ball was tighten to factory torque specs leaving out guesswork. Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs Item # C45036

Everything was as expected. Installation was a piece of cake after watching the very much appreciated video on etrailer.com. The hitch is very sturdy and fit like a glove. I couldn't be happier with this purchase.

Great design, easy install. Runs a touch low but that's how the back of Ford Explorer is designed for after-market installs. I would have probably purchased a hitch with upright assembly if possible.

Worked perfectly with my standard Ford Explorer hitch 2003. Service at etrailer was great, and hitch arrived in timely manner.

perfect for my needs - great price; great service

Product arrived ahead of schedule due to upgraded shipping at no extra cost. Order was accurate and appears to be high-quality. Obviously, I won't know for sure until I take it out with a trailer a few times, but I am glad to find a product that can tow my car and carry my bike rack at the same time!

They give you the exact fit as described. And fast delivery

I purchased this Curt Ball mount 10-1/4" because I also bought ball hitch mounted mud flaps and my existing hitch was too short.This hitch was maybe a little too long, but it should work.I hope this combination will protect my horse trailer from my nasty gravel roads!

With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.

Great product. Just as I needed. Very prompt delivery

Fast and efficient

Exactly what I needed for my new Ford Explorer. Great product and fast shipping. The bag keeps it from rattling around in the storage compartment.

Thank you etrailer for the quality products I received early last year. We needed a trailer hitch to install on our Subaru Forester for our move from Gig Harbor, WA to Spokane. We received the hitch hardware including the tow bar and electrical harness. The entire process took 4 hours. The installation process went off without a hitch (bun intended) using detailed videos I found online. Thank you etrailer.

Product came just as described and fit perfectly for what I needed. I used it for a hitch mounted on the frame of the rear of my fifth wheel rv. Hitch was mounted at the very end of the I-beam style frame i had on rv but I wasn't comfortable with the length of a standard size ball mount receiver. It needed to be longer. This product was exactly what I needed to complete my rv hitch setup. Thanks e-trailer !

Very happy with this ball mount - provides just the amount of drop we required for a level tow of our GeoPro travel trailer by our RAM2500. Plus, the extra length not only allows a tighter turning radius, but also allows us to lower the truck tailgate without having to detach the trailer. Huge improvement on all accounts for us compared to our prior setup. The product is well built and I'm confident will provide us years of good use.

Very pleased with etrailer. Very easy to order from website. Fast delivery, easy to install ,perfect fit . Thanks. .

Perfect fit for 2 inch Draw Tite receiver. good price, fast shipping.

Heavy duty , very good quality.

This was purchased for towing a 7k GTWR utility/landscape trailer with my 2018 Chevy Silverado 1500 WT 4x4. I measured for necessary drop before ordering, and the 4" drop is darn near perfect. It's a great help that the 2-5/16" ball comes complete, installed and torqued properly at the factory. Appears to be quality construction, fits and functions perfectly. I have no complaints or issues.

WHat a difference having the right drop has on handling. A great product - highly reocmmend.

Retail type stores only carry mainstream items so when I needed a special length ball mount for my 2011 Traverse I found the size and quality with Curt Products .

Looks great. Fast delivery!

It looks like it will work OK. It fits and appears to be the right height for my utility trailer, but I did not get a pin to hold the unit into my receiver - just the product. The picture showed a pin and a clasp was included.

Easy to use and haven't had any trouble towing my small trailer with motorcycle on board. Def recommend.

Received order the next day. Haven’t used item yet so no performance review available.

Everything arrived on time and well packaged. I installed a Curt hitch receiver to go with this ball mount. Installation for the hitch went exactly as described and was fairly simple for even a novice like me. Very pleased with etrailer.com and with Curt brand products in general. Couldn't be happier with the process from beginning to end. And the hitch looks and works great!

nice package.

I bought the 1 7/8 and 2 inch combo so that switching between the two is as easy as pulling a pin. However, I didn't realize that I had to install the ball. I had to find someone with a wrench and torque wrench big enough to do it. Otherwise, excellent quality as usual from E-Trailer.

I cannot use this ball mount because the shaft is too short that goes into hitch receiver on my one ton Dodge truck. It does not allow enough room between truck back bumper and ball to allow any trailer tongue to be put on ball.

I purchased this for use with a friction anti sway device I installed on an enclosed V nose trailer. It worked well.

This is an excellent hook. And it looks killer. etrailers exceptional service and quality is beyond compare.

Excellent products. And even better customer service i will definitely buy from them again.