Product Experts Available Now!
Call 1-800-940-8924
Curt Class II Drawbar - 3/4" Rise, 1-1/4" Drop - 9-3/4" Long - 3,500 lbs
(2344 reviews)
Price: $33.16
In Stock
We'll connect you with nearby partnered installers who know this exact setup.
Curt Class II Drawbar - 3/4" Rise, 1-1/4" Drop - 9-3/4" Long - 3,500 lbs
Part Number: C45519
In Stock
$33.16
Retail:$58.08
You Save: 43%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (2344)
- Q & A (0)
- Photos
CURT Trailer Hitch Ball Mount - C45519
Highlights
- 3,500 lbs GTW for Small Trailers: Handles light campers, boats, and utility trailers confidently.
- 1-1/4" Drop or 3/4" Rise for Level Towing: Lets you match trailer height to keep loads even.
- Fits 1-1/4" Class II Hitches: Designed for stable towing setups in compact receiver sizes.
- 9-3/4" Shank Length for Proper Clearance: Provides space between hitch pin and trailer coupler.
- Steel Build with Gloss Black Finish: Powder coat resists corrosion and wear from road grime.
- CNC-Machined Construction: Ensures strong, consistent welds and clean fitment over time.
Features to know about
Keeps Your Trailer Level: 3/4" Rise or 1-1/4" Drop
Getting your trailer height right makes towing smoother and safer. This Curt Class II Drawbar lets you use either a 3/4" rise or a 1-1/4" drop to match your setup and keep your trailer level. With both options built into one mount, you can line things up for balanced, even towing every time.
Built Strong for Everyday Towing: 3,500 lbs GTW Capacity
When you’re pulling a small camper, boat, or utility trailer, you need strength you can count on. Rated for 3,500 lbs gross towing weight and 350 lbs tongue weight, this steel drawbar handles regular hauls with confidence. It’s CNC machined for consistent welds and precision fit, making it solid from hitch pin to ball hole.
Resists Rust and Road Grime: Gloss Black Powder Coat Finish
Towing gear takes a beating from weather and road salt, but this mount stays looking sharp. The corrosion-resistant, black gloss powder coat finish stands up to rust and grime so your gear stays protected trip after trip. It’s built for real-world use without needing special care.
Simple, Reliable Setup: Fixed Mount That Just Works
No moving parts or adjustments—just slide it into your 1-1/4" hitch receiver and go. The 9-3/4" length from the center of the hitch pin hole to the center of the ball hole gives you steady spacing and easy hookup. Use it with a 3/4" shank hitch ball, secure it with a hitch pin or lock (sold separately), and you’re ready to tow.
Specs
Application
- Application: 1-1/4" x 1-1/4" trailer hitch receivers
- Class: II only
Weight and Capacity
- Gross towing weight: 3,500 lbs
- Tongue weight: 350 lbs
Dimensions
- Ball hole diameter: 3/4"
- Length: 9-3/4" from center of hitch pin hole to center of ball hole
- Rise: 3/4" from top of inside of hitch opening
- Drop: 1-1/4" from top of inside of hitch opening
D-19 45519 Curt Ball Mount - 1-1/4" - Class II
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Product did not meet expectations
Ratings & Reviews
4.8
2344 reviews
by:
Gary B.
04/24/2015
This draw bar in perfect for my John Deere X738 tractor. What I like about it is the ¾” rise it keep the draw bar height at about the same as the factory frame so the attachments height remain level. Thanks for the great product.
by:
Mike F
05/30/2015
I purchased a Curt class II hitch for my wifes subaru. I recieved it right away and the installation was a breeze. There was a simple little piece of two sided tape missing from the light wire kit. I called etrailer and George sent it to me that day. Service after the sale is what makes a good company great. I couldn't be happier. Thanks alot etrailer!
by:
CHARLES HAV
02/09/2015
This trailer hitch was easy to install. I am eighty six years and a disabled Vet. I took my time and had it on in one and half hours.
I also installed the heat deflector back on. I think this heat deflector should be reinstalled as the muffler creates a lot of heat. Saved a lot of money also as the dealer here wanted $500.00 for the hitch $60.00 for the wiring and half day to install. Thought he
had a sucker but I didn't bite. Thanks much George J
by:
JB
12/12/2016
Not much you can say about a bar with a piece of flat metal welded to it; well made looks good. What is really important is that e-trailer is fast, friendly and knowledgeable. I've ordered from them anytime I needed a trailer/RV part.
by:
Glenn Lehto
06/10/2013
We are very happy with everything that we ordered to put a hitch on our 2003 Subaru Outback. The drawbar is perfect; looks great; and better yet, works great. Thanks. Ordering everything to put the hitch on was simple, easy, and fast. Thanks so very much! We highly recommend etrailer.com for all such needed supplies!
by:
Bob L.
08/02/2017
The hitch was well made and the paint was excellent.
I liked the links to instructions. I found it easier to remove one muffler than drop the whole exhaust. I did not find good instructions for connecting the wiring but it was a simple easy job. I would like to see suggested kits that include all components to do the job. I calculate it saved me about $100 by doing the job myself. I suggest recommending either antisieze or loctite for the fasteners as both prevent corrosion.
I liked the links to instructions. I found it easier to remove one muffler than drop the whole exhaust. I did not find good instructions for connecting the wiring but it was a simple easy job. I would like to see suggested kits that include all components to do the job. I calculate it saved me about $100 by doing the job myself. I suggest recommending either antisieze or loctite for the fasteners as both prevent corrosion.
by:
Joe
08/23/2015
Shipping time wasn't of the essence for me so I went with the least expensive shipping got the item in a weeks time, I was quite satisfied with the delivery time frame. The class II draw bar itself looks very sturdy. The welds are quality. Shopped around and etrailer had the best price I could find. Last year I purchased my trailer hitch from them and received a great customer experience then as well.
by:
Edie G.
02/12/2015
Could not find this particular 1 1/4" drawbar locally. etrailer.com had it at a good price which offset the shipping. Order representative was efficient and pleasant, helped me with on-line catalog questions. Quick shipping. Just attached it to the hitch and I'm very pleased. Will go straight to etrailer.com when I need anything else. Good service - good quality - good price.
by:
Dave
10/18/2019
extremely well packed ...quick shipping
Dave
10/19/2020
Very durable...with my Subaru wagon I have been able to move my tow hauler around the yard with no problems...great value and highly recommended
by:
Jack B.
09/01/2017
I am a repeat etrailer customer due to their quality products, professional service and prompt shipping.
A replacement automobile required a drawbar with a lower drop and this one fit the bill perfectly.
Thank you to the folks at etrailer for once again "spoiling me".
A replacement automobile required a drawbar with a lower drop and this one fit the bill perfectly.
Thank you to the folks at etrailer for once again "spoiling me".
by:
Ed
03/30/2016
etrailer. com excellent hitches and parts with the best customer service !
by:
Don Watson
10/08/2013
I went with this product because of the bolt on capabilities limiting the amount of install work. The ability to not see the hitch when not in use (hidden behind the licence plate of the car) was the second reason for choosing this product. My other car would have had the tow bar visual at all times. Not a pretty thing. The draw bar is heavy duty. I cant wait to use it!
by:
Michael W.
07/24/2015
This is a great product. Something I don't ever have to worry about going down the highway with a full load. Even more important than a great product, is the service I received from etrailer.com. The bar was stolen through a hole in box. I called the company about the loss and was immediately speaking with a pleasant human. How novel! She (Ellen) said a new one would be shipped out and would I email a photo of the box.
Thanks so much!
Thanks so much!
by:
Don S.
04/18/2016
It's a Curt ball mount. Of coarse it's great.
Great customer service to go with it.
Thanks!
Great customer service to go with it.
Thanks!
by:
Terry
05/06/2015
Met expectations. etrailer.com would have made another $5.00 sale if they would have somehow reminded me to by the receiver pin. Oh well, quick trip to AutoZone fixed that.
by:
Bill M.
11/11/2015
It's just a drawbar purchased along with a Curt hitch. Works great as it should. Etrailer price and service can't be beat.
by:
TrailerJoe
06/17/2019
Arrived very quickly. Packaging somewhat damaged, but not contents. All necessary parts included. Installation videos a must see for proper install.
Thanks again etailer!
Thanks again etailer!
by:
Armand Bernagozzi
07/08/2013
I recently purchased the Curt Class II Drawbar. First, it arrived quite promptly. The product itself is well built and it is obvious that it was fabricated to high standards. It performs well and as expected. I would recommend this product, not only because of the Curt name, but because of the quality.
by:
John S
11/13/2020
good product. Quick service. Bought several items from these guys, all good. Keep coming back. My first go to when looking for anything trailer.
by:
Kent
02/06/2021
Prompt shipping and excellent price for a high quality Curt drawbar which is made in the USA. My Range Rover Evoque is now ready for trailer fun.
by:
Charles
09/18/2019
It came just as described. Recommend you put in the description that you need to order a receiver pin too.
by:
Tim N.
05/23/2014
Good product...works as expected. I just needed a slightly longer drawbar and this fit the bill.
by:
midhenry
09/01/2015
Ummm , it's a tow bar.
That being said, it would have helped to know the tow bar was solid steel, making the locking pic I purchased worthless as it requires a hollow housing.
That being said, it would have helped to know the tow bar was solid steel, making the locking pic I purchased worthless as it requires a hollow housing.
by:
larry
04/29/2013
exactly what I wanted. Fast delivery. I always have a great experience with etrailer.com
by:
Steve T.
06/05/2015
Well made and good fit. Wish they made the 1-1/4" in stainless.
25
2344
true
Show More Reviews
See what our Experts say about this CURT Trailer Hitch Ball Mount
- Longer Ball Mount that Fits 1-1/4 inch Trailer HitchA longer ball mount would be a decent idea I would think but since its going to be a Class II 1-1/4 inch ball there aren't super long options. Mostly everything will be about same length with some variations. If you can determine the rise/drop you need I can let you know what longest option would be.
view full answer...
- What is the Towing Capacity of a 2007 to 2010 Mini Cooper SThe only information I could find on the towing capacity of the Mini Cooper was on the base model (using 2008 as the model year) and that was on MSN Autos. I checked an online copy of the owners manual and cannot confirm the capacity of any models. What I did find for a 2008 base model was a towing capacity of 1,433 pounds. However you will need to speak with a Mini dealer/technician to determine the vehicles capacity as equipped. The Curt trailer hitch # C11130 has a capacity of 2,000...
view full answer... - Dimensions For 1-1/4" Ball Mounts From Ends Of Mount To Receiver Hitch PinsHere are the measurements for each of the ball mounts that you requested. I took measurements from the center pin to both ends of the ball mount. I have included images with the measurements as well. Draw-Tite Drawbar # 36051 8-3/8" and 1-15/16". Curt Class II Drawbar # C45519 10-3/4" and 1-1/2". Draw Tite Drawbar # 36053 11-1/16" and 2". Curt Class I Drawbar # C45019 10-7/8" and 1-7/16".
view full answer...
- Recommended Trailer Hitch Receiver and Wiring Harness for 2014 Subaru ForesterWhen I put your 2014 Subaru Forester into our fit guide I did not get the same results you did. I get the # C13144 for a 2 inch receiver option and # C12100 as a 1-1/4 inch option. I get the same options when I type this into Curt's fit guide. I'm not sure if we had a glitch or what, but I am confident that either of these hitches I referenced will work well for you. The # C111813 is not a fit for your vehicle and is only a fit for 1993-2002 Toyota Corolla and Geo/Chevy Prizm models....
view full answer... - Installing a Trailer Hitch on a 1993 Subaru LegacyYou will at the very least need a 1/2 inch wrench and a torque wrench that is good for 110 foot pounds. It is important to get the bolts to the proper torque rating. If they are too loose you could lose the hitch. Too tight and you could damage the hitch or your 1993 Subaru Legacy. Most auto parts stores can loan out any tools you might need. You should not have to have the car on a lift to install it. lying on the ground would likely be fine. Some people who want more space would jack...
view full answer... - Recommended Towing Package For A 1997 Suzuki Sidekick SportTo be able to tow a trailer with your 1997 Suzuki Sidekick Sport you will need to start with the Curt Trailer Hitch Receiver # C11024 you were looking at but you will still need the following accessories to complete your towing setup: Vehicle wiring harness: Hopkins Plug-in Simple Wiring Harness with 4-Pole Flat Trailer Connector # HM41245. Drawbar: Curt Class II Drawbar # C45519. Hitch ball: 1-7/8" # A-80 or 2" # A-82. Hitch pin and clip: Curt Hitch Pin and Clip for 1-1/4" Trailer...
view full answer... - Hitch Recommendation for a 1999 Subaru Outback For your 1999 Subaru Outback Wagon you would want the Curt Trailer Hitch Receiver # C12270. I checked with Curt and this is the only hitch we offer that would be confirmed to fit your vehicle. For a ball mount you would want part # C45519, for a 1-7/8 inch hitch ball part # C40001, 2 inch hitch ball # C40018.
view full answer... - Trailer Hitch and Wiring for a 1990 Subaru Legacy WagonI checked with Curt and trailer hitch # C12270 fits all models of the 1990 Subaru Legacy including the wagon (even though the instructions state sedan, see link). Ball mount # C45519 is recommend for this hitch. Along with the pin and clip # F-4. . For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. And for trailer wiring you can use # C59496 to add a 4-Way flat connector to the rear of the vehicle.
view full answer... - Trailer Hitch and Wiring for a 2005 Subaru Legacy Wagon, Outback ModelAfter doing a little searching I was able to determine that Curt trailer hitch # C12284 will fit a 2005 Subaru Legacy Wagon, Including Outback Wagons. None of the other hitches are confirmed to fit. The correct ball mount to use is # C45519. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. For a trailer wiring harness use # 118461.
view full answer... - Correct Ballmount for a 2008 Subaru OutbackBoth Class I and Class II trailer hitches are tested and rated with the specific ball mount for that hitch, therefore the ballmount used must be the one that is recommended by the trailer hitch receiver manufacturer. If your vehicle is equipped with a factory Class I, or Class II I can make the following recommendations based on the manufacturer. Class I or Class II hitch that is manufactured by Curt I recommend the # C45519 ball mount. Class II hitch that is manufactured by Draw-Tite,...
view full answer... - Can Lower Center Reverse Light be Installed/Used on a 2004 Mini Cooper After Install Trailer HitchYes, you should be able to install and use a center light in your 2004 Mini Cooper rear bumper as long as the hitch is not being used. The instruction do specify that if trimming is required on the back of the bumper after installing the hitch, not to cut any piece used to hold the trim cover or light. Meaning that the cover or light can be reinstalled. I have included a link to the installation instructions for you. If you are going to use the hitch for a bike rack or cargo carrier Curt...
view full answer... - Can Spare Tire on 2013 Mini Cooper Hardtop Remain In Place with Curt C11272 Class I Hitch InstalledThe Curt class I hitch you' mentioned, part # C11272 will fit your 2013 Mini Cooper hardtop as long as it isn't a specialty model like the S series or John Cooper Works. I can not only confirm that you'll be able to retain your spare tire, I can prove it with a photo from the installation instructions showing the hitch installed and the spare tire still in place. Per the instructions, you might need to reposition the tire slightly, but you'll still be able to carry it under the rear of...
view full answer...
- Parts Needed To Tow a Trailer with a 2011 Subaru Outback Wagon SportThe ball mount that is recommended for use with the Curt Trailer Hitch Receiver part # C11315 when towing is the Curt Class II Drawbar part # C45519 which would then need to be combined with the 1-7/8" Hitch Ball part # C40001 or 2" Hitch Ball part # C40018 and the Hitch Pin and Clip part # F-4. Please note, you'll also need a trailer wiring harness to control the lights and for this I recommend the Curt T-Connector Vehicle Wiring Harness part # C56111.
view full answer... - Can the # C45519 Ball Mount be Used on a 2004 Buick Park Avenue and How Long Should the Drawbar BeMy fit guides show that your vehicle uses the Draw-Tite Ball Mount, item # 36061, in the rise position only. You would not be able to use this draw bar in the drop position. The manufacturer of the hitch does safety testing that puts the drawbar and ball in the best position, in case of an accident, and we cannot recommend using a draw bar in a different position or with a different rise or drop. We have an FAQ on hitch Classes for you to review, see link. The Draw-Tite Ball Mount, item...
view full answer... - Is There a Larger Hitch for 2014 Chevy Impala Limited?There are a pair of trailer hitches which are confirmed fits for your 2014 Chevrolet Impala Limited, and each are Class II rated, the Draw-Tite, # 36407, or the Curt, # C12252. The receivers on these hitches are each 1-1/4 inches, and the gross trailer weight is 3,500 for each, while their tongue weight is 300 lbs; neither is rated for weight distribution. If you are interested in towing with your Impala, I can recommend a ball mount for your hitch, the Curt # C45519, and the accompanying...
view full answer... - Can I Retain Spare Tire on 2013 Mini Cooper Coupe with Curt Trailer HitchI spoke with my contact at Curt and he said Curt trailer hitch, part # C11272, will allow you to retain your spare tire under your 2013 Mini Cooper Couple with single exhaust. The spare can be removed with the hitch in place. Curt does require the use of Support Straps, # 18050, for all non-trailer loads including bike racks, cargo carriers and so forth. Failure to properly support these loads will void your hitch warranty from Curt. If you plan to do some light towing you may also be...
view full answer... - Interchangeable Ball Set for a Curt Class I Trailer Hitch and Ball Mount for a 2008 Mini Cooper SThe Curt trailer hitch for a 2009 Mini Cooper S is # C11130, which is a Class-1 hitch with a 1-1/4" square receiver opening. This is for hardtop or convertible, but not for models with a single center exhaust. You will need a ball mount and tow bar to tow a small trailer. I recommend the Curt # C45023 mount and a Curt # C40018 hitch ball with a 3/4" diameter shank. For wiring use kit # 119250KIT. I have linked the wiring instructions as well.
view full answer... - Ball Mount Recommendation for 1-7/8 Inch Trailer Coupler and 1997 Subaru Legacy WagonThe recommended ball mount for trailer hitch # C12270 is # C45519. For a 1-7/8 inch ball use # A-80. Or another option is to use Euro ball mount # C45551.
view full answer... - 2013 Mini Cooper Hardtop Trailer Hitch Fit RecommendationFor your wife's 2013 Mini Cooper that has a hardtop and a single exhaust the Curt hitch part # C11272 that you referenced is the correct hitch to use. If you plan on doing a bit of towing you may also need the following: Curt Powered Converter with Wiring Kit, # C59236, which provides a 4-way connector at the back of the vehicle. Ball Mount # C45519 Hitch Ball # C40001 for 1-7/8" and # C40018 for 2"
view full answer... - Recommended Hitch Lock for Curt Drawbar on 2015 Ford MustangTo secure and lock the Curt Class II Drawbar # C45519 referenced in your question to your hitch receiver, I recommend the Curt Hitch Lock # C23517. This is a really nice, stainless steel lock that is compatible with this drawbar and your hitch, and will do a great job of helping to deter theft of your valuables. It features an easy-to-operate quarter-turn lock activation and a watertight dust cap that will prevent internal corrosion. 2 keys are included with the product. I have attached...
view full answer... - Can Heat Shield on 2015 Subaru Forester be Trimmed and Left On Using Curt Class II Trailer HitchThough the instructions call for the removal of the heat shield for Curt hitch # C12100 it is up to you whether or not you want to trim it or not. So yes, you could trim the heat shield if you wanted to on your 2015 Subaru Forester. If you go with this Curt hitch and you will be using it for a bike rack or a cargo carrier then Curt requires the use of stabilization strap # 18050. The Draw-Tite hitch, # 36523, does not have this requirement. If you plan on doing any towing then for the...
view full answer... - Will J-Style Kayak Carriers Fit the Bars on Malone EcoLight Trailer # MAL53FRYes, your J-Style carriers will fit on the crossbars on the Malone EcoLight Trailer - 58" Crossbars - 14' Long - 400 lbs Item # MAL53FR. So no worries! I have linked a video review below of this trailer for you. If your 2014 Subaru Forester does not already have a trailer hitch I recommend Curt trailer hitch # C12100 which will have more than enough capacity for the loaded trailer. For this hitch use ball mount # C45519. You will also need 2 inch ball # C40018. And for trailer wiring...
view full answer... - Parts Needed To Tow a Small Boat Trailer With a 2004 Subaru Outback WagonThe Curt Trailer Hitch Receiver part # C12270 is a confirmed fit for your 2004 Subaru Outback Wagon and it will work to pull a boat trailer. That said, you will need a few other parts to complete your setup which I have listed for you below. Curt T-Connector Vehicle Wiring Harness part # C55370 Curt Drawbar part # C45519 Curt Pin and Clip part # F-4 Curt 1-7/8" Hitch Ball part # C40001 In regards to installation of the Curt Trailer Hitch Receiver, this is very simple to do yourself as...
view full answer... - Will Curt Class I Receiver Hitch # C11272 Fit 2013 Mini Cooper Hardtop With Single ExhaustThe Curt Class I Receiver Hitch, # C11272, does indeed fit the 2013 Mini Cooper Hardtop with single exhaust, excluding the S Series and Works. I have attached the installation instructions for you. As you will see in the final steps the bumper will have to be trimmed in order to access the hitch receiver. I have also attached a picture pointing out this location. Curt does require the use of Support Straps, # 18050, for all non-trailer loads including bike racks, cargo carriers and so...
view full answer...
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
Written by:
Lindsey S
Expert Research:
Robert G
Expert Research:
Reno H
Video Edited:
Jacob T
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Mike S
Updated by:
Isabelle B
Video by:
Dustin K
Installed by:
Cole B
Installed by:
Bradley B
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jb
12/12/2017
As bullet proof as your fine reputation for parts and service.