To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
If you want your vehicle to keep its factory look when it’s not towing, this setup does the trick. The hidden design leaves no bulky crossbar or brackets in sight, and the tabs stay on your tow bar so there’s nothing sticking out from the bumper. Snap-in polyethylene covers keep dirt and debris out of the receivers, helping the arms slide in and out smoothly every time you hook up.
Each arm slides into the receiver, twists to lock, and secures with the included pull pin. It’s a quick, secure process that makes connecting in your driveway or at a campsite simple and reliable. The distance between brackets is 34-3/8" and bracket height is 18", letting you plan other components around those specs.
This base plate bolts directly to the chassis with no welding required. Its sturdy steel build spreads towing forces evenly to reduce weight placed on the suspension. That dependable design gives peace of mind for long-distance towing setups that see thousands of miles of use.
Already have a tow bar setup you like? You’re covered. This kit works with Demco, etrailer, and Blue Ox tow bars without an adapter. For Roadmaster setups, just add the correct adapter—e98983, e98984, e98979, or e98981 (sold separately). The included electrical bracket lets you mount a round connector plug up front so your wiring stays tidy and ready to connect.
If you’re handy and like doing your own setup, this install is right up your alley. The base plate bolts securely to your vehicle’s frame using the included hardware—no welding needed. Clear instructions guide you through each step for a straightforward project that ends with a clean, solid towing setup ready for the road.
Ratings & Reviews
Very good quality. Great instructions and install video.
easy to find on your web site, quick delivery, everything needed for a quick and secure installation. The instructions were easy to follow and all parts were included and fit perfectly.
Fit my 2018 Colorado 2WD manual perfectly. I disconnect the drive shaft and hose-clamp it to the gas tank cross-member when I flat-tow it. works perfectly
This is a great base plate, it really looks good and integrates well with the front of the jeep.
Very easy to install and I love the finished look. However I had to cut a couple of relief points in the rock guard in order to get the back two screws into place. Without these the rock guard would bind against these points on the base plate and not allow the rock guard to travel back far enough to reattached the screws. I have a 2025 Jeep Wrangler Sahara.
Easy installation on my F-150. Videos on website are very helpful.
Great fit, great instructions.
They were easy to install and came with good instructions and pictures. This is the second vehicle I have installed this product on and etrailer is my go to.
Relatively easy install. Double check the skid plate templates. I had to change mine significantly, not just holes but slots from the top all the way to the bottom of the towbar. In the end, they look great they install well. Very nice system.
Heavy duty bracket. The included bracket for the electrical is also heavy duty.
Mounted on a 2025 Bronco with modular bumper. I did have to do a little additional cutting on the bumper to make it fit.
Easy installation if you watch the videos on the etrailer website.
I like the fact that this base plate is hidden behind the air dam below the bumper.
Install of the baseplate itself was not difficult and went smooth. The templates to cut out the holes in my plastic shroud were not accurate. It took some additional trimming to get right and I found that a bit frustrating.
I have installed three base plates on my vehicles. All have been purchased from trailer. They have all been rather easy to install just a matter of taking the time it takes. On this last one mounted on my 2024 Ford Maverick I recommend adding to the instructions an easier way to unplug the light plug from the front facia. I think it is much easier if one turns the wheel full left and unplug the socket before pulling the facia. Easier than current instructions that say be careful when pulling the facia since the plug needs to be undone. I was able to do the whole thing by myself this way and not needed someone else to hold the facia while disconnecting the plug.
Everything went together well and it looks great. No cutting or modification needed other than drilling the frame for the 2nd bolt. 2023 GMC Sierra 1500 AT4 Duramax
Nice setup. Instructions were little off for my application (2026 with shutters) Shutters had to be removed to install correctly. Instructions did not cover this. Everything fit as it should. Final product very satisfied.
2025 Ford Mavrick AWD Hybrid. I have installed 2 base plate kits on Honda CRVs.
Piece of cake. Remove front cowling..install base plate..done. Not so on my 2 day old Mavrick. 1 add a spacer to move kit away from shutters...adding washers is super poor planning on manufacturing's part..2 you don't have to go up & over in the middle now 70% of the condenser air flow is blocked by welded steel..could have been much better. 3 provide a mounting ring or hook...wrapping a safety cable around sheet metal components is silly Engineering.
Installation on a 2018 Jeep JL Unlimited Sahara went well, no surprises. Attaching the base plate to chassis safety cables required some ingenuity as the instructions were useless in this installation. Etrailer should post some actual installation photos vs. a poor generic diagram.
Easy to install and works like should. I put a aftermarket bumper on as well so it was simple with no issues to install I have pulled it over 6000 miles and a lot of one nighter stays. It is simple to hook up and no issues pulling.
Came very well packaged, looked great very well made and heavy duty.
Instructions could have been better.
Template for air dam cutout just a rough starting point you will need to do more trimming for proper fit. Overall very happy looks great and very solid.
I've bought from e-trailer several times and I'm always happy with my purchase. The base plate and tow bar are of excellent quality and a good price. Installation was as not too bad; I watched the installation video for my truck even though it was for a different base plate. It gave me enough information to get the job done.
Haven't installed yet, but etrailer Hasn't let me down yet!!!
I ordered the wrong mounting plate but I kept the falcon kit tow bar which is a excellent unit.
Do you have a question about this Tow Bar Base Plate?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Steve
7/7/2022
Works awesome