If you’ve ever felt every bump and jolt when towing, this mount changes that. The built-in air bag and rubber bumpers act like a suspension system between your truck and trailer, soaking up road shock so your setup doesn’t take a beating. The design limits chucking and jerking and helps protect your truck and trailer from unnecessary wear and tear. You can adjust the air pressure to fine-tune the cushion for the load you’re hauling, whether it’s light gear or heavy equipment.
When you’re pulling serious weight, you want a hitch that’s solid from the start. This mount handles up to 10,000 lbs gross towing weight and 1,000 lbs maximum tongue weight. The aluminum frame keeps it light but strong, and the steel balls with a matte-black finish are welded in place for extra stability. It’s the kind of build that inspires confidence every time you hook up.
Switching between trailers doesn’t need to be a chore. This mount gives you five drop positions from 1/2" to 4-1/2" so you can level out whatever you’re towing. The large handles make it easy to move the platform up or down without fumbling for small pins, and the dual-ball setup (2" and 2-5/16") means you can match common coupler sizes in seconds.
A lot of heavy-duty gear rusts fast or adds too much weight to your hitch. This one is different. The aluminum frame is both lightweight and rustproof, finished in shot-blasted and powder-coated layers that stand up to rain, salt, and grime. That means smoother handling when mounting it up and less worry about corrosion down the road.
Keeping it working smoothly is as easy as adding a bit of grease now and then. The built-in grease zerk fitting at the pivot point makes lubrication quick work, helping the hitch move freely under load and stay quiet through long hauls.
| Make | Model |
|---|---|
| Chevy | Colorado, Silverado |
| Dodge | Ram |
| Ford | F150, F250, F350, F450, F550 |
| GMC | Canyon, Sierra |
| Honda | Ridgeline |
| Nissan | Frontier, Titan |
| Ram | 1500, 2500, 3500, 4500, 5500 |
| Toyota | Tacoma, Tundra |
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody, Andy here with etrailer.com. Let's take a look at the Shocker streamlined aluminum air cushion two-ball mount for your two-inch hitch receiver. Now, this heavy duty aluminum frame shock absorbing hitch features an airbag and cushion bump stops to give you a smooth and comfortable ride while limiting chucking and jerking to give you better control over your truck and your trailer. This is also going to help extend the life of your truck and trailer by protecting them from unnecessary wear and tear. And this is also going to reduce the noise and rattle that's common with standard ball mounts. Now, I wanna point out that, again, this is going to fit your two-inch hitch receiver.
However, this is not going to fit a 2.5-inch hitch receiver even with a reducer sleeve because trucks with a 2.5-inch hitch have deeper frames. Also, this is not going to work with your SUVs, CUVs, or sedans due to limited clearance. This does require five inches of clearance below the bottom of your receiver tube, and your receiver opening should be flush with your bumper or protruding from the rear of your truck for that best fit. Now, this aluminum frame is lightweight, it weighs about 30 pounds. So it's lightweight, it's durable.
Obviously, it's going to be rust proof. So this is going to be perfect if you're using your trailer around water such as a boat trailer. And this frame features a silver impact-resistant powder coat finish. The sturdy steel shank and steel combo ball attachment are powder coated to resist rust. And this does have a maximum gross towing weight of 10,000 pounds and the tongue weight is 1000 pounds.
But it is important to remember that a towing setup is always limited by its lowest rated component, whether that be your truck, your hitch, or another component. Now, this does feature two different-sized hitch balls. That's going to let you tow trailers with different coupler sizes. The balls are actually welded to the mount for added stability and so this is going to be very easy to switch back and forth between your 2 5/16-inch ball and your two-inch ball. So let me give you a brief demonstration of that.
As you can see, we do have these two easy-to-remove pins. The large rings are gonna be very easy to grasp, so no more fumbling with small hitch pin heads. This also features large safety clips. So you're not gonna be at the back of your truck, struggling with this when you're trying to adjust this. So I went ahead and removed our clips and I'm gonna go ahead and remove our pins. By the way, these rings can be folded one way or the other to get them out of your way. So as you can see, these pins slide out very easily. And I'm just gonna flip this over to the two-inch ball and I'll go ahead and put it at the highest setting here and slide our pins back in. This is going to have a drop range from 1/2 inch to 4.5 inches, and the inside width of our channel is 3 3/4 inches. And then the distance between our vertical adjustment holes on center is one inch. Now, you can mount any Shocker Hitch accessory including their pintle hook, their clevis pin, and drawbar attachments into the channel to hook up even more trailers. So you're not limited to this dual ball mount here. Now, the body of the Shocker Hitch is designed to pivot back and forth on the shank, kind of like a seesaw or teeter totter as the airbag sits directly beneath your truck's receiver. And then the cushion bumpers, lemme go ahead and give you a brief overhead view here. These cushioned bumpers are going to take turns along with our airbag to absorb that road shock. So when you hit a bump or your trailer bounces, this unit is going to pivot so that the airbag can isolate and absorb the energy. And then when your trailer jerks forward or backward, the two cushion bump stops are going to help soften the force. Now, the airbag is easily adjustable. We do have this air valve here with this included cap. And so for heavier loads, you're just going to add more air. For lighter loads, you're gonna let air out. It is gonna be very easy to determine the correct amount of air to use. To do that, you're just gonna simply hook your trailer up and then load the trailer the way that you are going to tow it. And then you're going to add air until these bump stops begin to compress. And once they begin to compress, then you should have the right amount of air in the airbag for your load, and then you're gonna be ready to go. So it's as easy as that. This does include a zerk fitting right here at the pivot point, which is going to make maintenance very easy. And the hitch pin hole diameter is five eighths of an inch and a pin and clip is sold separately. So if you do not already have a pin and clip that's gonna be compatible with this, that is gonna be something that you're gonna have to pick up separately. Lemme go ahead and give you some measurements from our hitch pin hole, just to give you an idea of the clearance that you are going to have. So measuring the distance from the first hitch pin hole to the center of our ball, we're sitting right at 10.5 inches. And then the distance from the second hitch pin hole to the center of the ball, we're sitting at 11.5 inches. And then the distance from the second hitch pin hole to the end of the shank, we're sitting at 2 3/4 inches. Now, this is really an investment that you are making. So instead of going with just the standard pin and clip, I do recommend taking a look at the InfiniteRule locking pins for the Shocker Hitch ball mounts. These pins are gonna work for your two-inch and 2.5-inch hitches. And on your screen I am including our item number for those locking pins. You can just take that item number and put it in the search field of our website, and that will take you to those locking pins. And that's going to be a great way to protect this investment on the back of your truck. You're gonna get two locking pins to lock and secure your attachment and then another locking pin to secure this to your trailer hitch receiver on the back of your truck. So if you are looking for a heavy duty aluminum frame shock absorbing hitch with an adjustable drop dual ball mount, this item is gonna be really a great item for you to consider. Well, that's gonna wrap up our look today. I do hope that it was helpful for you. Again, my name is Andy, thank you for joining me.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.