Adjustable Ball Hitch For Trailer That Pulls Landscape Trailer And Low Down Track Boat Trailer
Published 06/23/2026 >
Products Featured in This Question
Question:
I pull a landscape trailer during the week and a lower down tracker boat on weekends. One uses a 2 inch coupler and the other uses 2-5/16 inch, and my current fixed ball mount makes one trailer ride nose-high. What would you recommend?
asked by: Shane
Expert Reply:
Hey Shane, I’d go with an adjustable 2-ball mount here so you can handle both coupler sizes and clean up the trailer height issue at the same time.
If your truck has a 2" receiver, the Fastway Flash Force # FA33FR is the one I’d start with for a moderate drop range. It includes both the 2" and 2-5/16" balls, adjusts in 1" increments, and gives you up to 5" of drop or 5-1/2" of rise. If your boat trailer or landscape trailer needs more drop than that to sit level, move up to the # FA93FR, which gives you up to 7" of drop or 7-1/2" of rise. I highly doubt you'd need the big drop but you'll be able to find out soon enough by measuring the difference between the coupler height and receiver height as seen in the photo below.
The nice thing is that once you have the right height for each trailer, you can just move the platform and rotate the ball instead of keeping separate mounts in the truck. Feel free to let me know the drop you need or if you need any help during this process!
Product Page this Question was Asked From
Fastway Flash Force Adjustable 2-Ball Mount- 2" Hitch - 5" Drop - 5-1/2" Rise - 10K
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- Two Balls
- 2 Inch Ball
- 2-5/16 Inch Ball
- Steel Shank
- Drop - 5 Inch
- Rise - 5 Inch
- Fits 2 Inch Hitch
- 10000 lbs GTW
- 8000 lbs GTW
- Fastway
more information >
Continue Researching
- Q&A: Is there an Anti-Rattle Device for a Fastway Flash Force Adjustable Ball Mount?
- Q&A: What Is Needed to Allow a Trailer to be Towed Level
- Article: How to Measure for Trailer Hitch Drop
- Q&A: How To Prevent Theft And Rattling Of Fastway Flash Force Adjustable Drop Hitches For Truck Receiver
- Q&A: Is There A Way To Lock The Fastway Flash Force Ball Mounts So They Can't Be Stolen Off My Truck?
- Q&A: Where is Drop Dimension Measured on Curt Hitch # C87CR
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Q&A: Will The Locking Pin In The Weigh Safe Hitch WS78RR Fit 2" and 2-1/2" Hitches?
- Q&A: Does Curt Deep Drop Adjustable 2-Ball Mount Come with a 1-Ball Setup?
- Article: Steel vs. Aluminum Ball Mounts
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
- Article: 5 Things to Know About Weight Distribution Hitches


