See what our Experts say about this Brophy Trailer Hitch Ball Mount

• Anti-rattle Device for 1-1/4 Inch Trailer Hitch Recessed Inside of Bumper
  You could use Roadmaster Quiet Hitch # RM-061-125 upside down but I don't think it is going to fit based on your pictures. Something smaller like Item # F-315 that goes into the shank of the accessory you are inserting into the hitch will likely fit better but will not worth with accessories that have a solid shank. If you need a draw bar with an anti-rattle solution check out Brophy's Anti-Rattle Drawbar, 1-1/4" Hitch, 5-1/2" Rise / 6" Drop, 7-1/4" L, 3.5K Item # BR39FR
  view full answer...
  
• Solution for 1-1/4" Ball Mount With 7" Rise for 2016 Honda CRV-EX Towing U-Haul Trailer
  The 1-1/4" receiver does limit you but I have a solution to achieve a 7" rise for a ball mount. You do not want to use an extension since it will cut your capacity in half which means you wouldn't be able to tow that trailer. What you need is the Brophy Anti-Rattle Drawbar # BR39FR. This only has a 5-1/2" rise, but you can combine it with the Curt RockerBall # C94CR. The ball sits 1-1/2" taller than your standard hitch ball with the shock absorbing base. It also uses a 2" ball which is...
  view full answer...
• 1-1/4" Ball Mount Capable of 7" of Total Rise With 2" Ball
  I have a solution for you to be able to get to 7" of total rise. The Brophy Anti-Rattle Drawbar # BR39FR is a 1-1/4" ball mount that will give you 5-1/2" inches of rise. That is the largest rise that I have been able to find. You can couple that with the Curt RockerBall Shock Absorbing 2" Hitch Ball # C94CR. It will fit the 3/4" hole in the Brophy ball mount. The ball does sit 1-1/2" taller than a traditional hitch ball thanks to the shock absorbing mechanism. This will also give you...
  view full answer...
• Recommended 1-1/4 Inch Draw-Bar w/ a 6 Inch Rise
  There is only one drawbar for a 1-1/4" hitch receiver that has a 6" rise. It is the Curt Class II Euro Style Drawbar item # C45591. This is a European style ball mount where the hitch ball is attached. It will give you 6-5/8" of rise. This is only recommended to be used on class II 1-1/4" receivers. If your hitch is a class one then the most rise you can get is 5-1/2" with the Brophy Anti-Rattle Drawbar item # BR39FR. For hitch balls you will want item # 19258 for a 2 inch ball or item...
  view full answer...
• Could Brophy Ball Mount # BR39FR be Used in Class I Trailer Hitch
  The Brophy Drawbar part # BR39FR could be used in a Class I hitch but typically Class I hitches require a specific ball mount be used so I'd check with the manufacturer of your trailer hitch.
  view full answer...
• Is a 1-1/4 Inch Ball Mount Available With a 6 Inch Rise
  The 1-1/4 inch ball mount with the largest rise we offer is part # BR39FR from CR Brophy which offers a 5-1/2 inch rise. The rise of the ball mount doesn't need to be exactly equal to the height difference between the receiver and the trailer coupler height. As long as you can get within 1-2 inches, that'll be plenty close enough. If you click the provided link, you can see a product description video for the ball mount I recommended.
  view full answer...
• Ball Mount Recommendation for 2017 Volkswagen Golf with 4 inch Rise
  Based on the dimensions you listed the correct amount of rise you need from a ball mount is 6 inches. Since the EcoHitch part # 306-X7310 is a 1-1/4 inch hitch you'd want the ball mount # BR39FR and you'd be set. For a hitch ball you'd want part # 19258 for a 2 inch ball or part # 19256 for a 1-7/8 inch ball.
  view full answer...
• Lowest Ball Mount Drop Available for a 1-1/4" Hitch Receiver
  The closest we can get you to that setup is with the following: - Brophy Anti-Rattle Drawbar # BR39FR (6" drop) - 2" Hitch Ball # 19258 You'll have a really hard time finding an 8" drop for a shank that fits a 1-1/4" hitch receiver simply because that hitch receiver size is weaker than a 2" or 2-1/2" receiver so you don't want there to be the possibility for that much torque. As long as you have your ball mount within 1" of your towing setup being level you'll be good to go, but I'm...
  view full answer...
• Compatibility of Tall Trailer Coupler Height With 1-1/4 Inch Receiver
  For a 10 inch rise on a 1-1/4 receiver, you would need to use an adapter like you stated. This will reduce the tongue weight capacity of your hitch receiver by 50% because you are using an adapter which puts more leverage on the hitch receiver. I recommend using the shortest length possible for this like the # HTAD and the BulletProof Hitches Adjustable 2-Ball Mount for 2" Hitch # HD2010. This combination may make it so your trailer won't be compatible with its tongue weight, which would...
  view full answer...

Do you have a question about this Trailer Hitch Ball Mount?