Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Chrome-plated 2" hitch ball with internal thread. Included bolt has a 3/4" diameter x 2" long shank. Provides a connection point for your trailer's coupler.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the 2" Internal Thread Chrome Hitch Ball with the 3500 pound weight capacity. Now, this hitch ball will provide the connection point for your trailer's coupler. It's a durable chrome-plated finish with a nice sleek, attractive look.Now this one is the internal thread designed hitch ball, so it's different from most hitch balls that have a threaded shank and a nut when you install it. This will include this 2" long, 3/4" diameter threaded bolt and lock washer, and it screws into the bottom of the ball. So when you go to install this, you'll put your ball on top of your ball mount and then run your bolt up through the hole and then attach it that way and torque it down. Again, the ball diameter is 2".
The ball height is 2 3/4". The shank dimensions . You're going to be looking right at 2" long, 3/4" diameter, and again the weight capacity which will be stamped on the top of the ball, is 3500 pounds.But again, just put your washer on, put this onto your ball mount. Run this through the ball mount. Thread it in there, and then torque it to factory specs.
That should do it for the review on the 2" Internal Thread Chrome Hitch Ball with a 3500 pound weight capacity.
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
Ratings & Reviews
Works great for my application.
Good product fast shipping.
arrived on time. nice weight to it. needed a coarse thread for special application.
should look good when installed.
Hard to find these balls with internal thread. I'm glad etrailer had them.
got exactly what i ordered. shipping was very fast, just a few days. happy, happy, happy!!
I’m glad to have found e trailer easy to find hard parts that I cant find Nowhere else
Great product well made
Worked Perfectly
Fast shipping, arrived as ordered and pricing was very fair. Very satisfied and would highly recommend this company to others.
Was having trouble finding a ball with a long enough shank for my stock bumper so I purchased this and separately a longer bolt. Worked great towing a 8x6 trailer over 600 miles
Using this on my loader bucket on the tractor so I can move my trailers across the lawn and not tear it up like my truck does. The internal threads with a bolt will assure it is easily removable and the threads won't be damaged.
The first hitch ball had the bolt/threads rusted to the point that I could not remove it. I called etrailer and they sent me another one out that afternoon. best customer service around!
Great product at a great price and fast shipping. The 2 inch ball with the 3/4 bolt was a perfect fit for my atv’s and utv. Would recommend to anyone.
Great fast service. Ball hitch got here in two days.
Was happy to find this item available. A 2" trailer hitch ball with internal threads(3/4-10 female). With the female treads I can leave the Swisher plow undercarriage attached to the ATV and have the ball on at the same time. Before, in order to have a trailering ball on I needed to remove the undercarriage rear mount bolt that utilizses the tow ball hole, remove the A-frame bracket mount pins and drop the whole plow mount undercarriage. Then install the ball in its place. Price was higher than I thought it would be; but it'll save me a lot of hassle all winter long.
Really nice ball with internal threads which to be honest, I thought no longer existed. Great communication and quick shipping. I’ll be back for more soon! Thank you!!!
Great product!!
Made a double ball offset receiver with a measured piece of 3/4" all thread and welding machine. The internal thread makes pre-fitting much easier than lining up two cut-off standard hitches. Would buy again and recommend to anyone.
I like these internal thread balls for this reason-> I'm a farmer and use balls on my tractors that have drawbars of various sizes. A regular shank ball will get the threads boogered up after just a few uses and I'll never be able to tighten them down again. The internal thread ball I can replace the bolt when the thread does get boogered also I can use a different length bolt for each tractor. I've never had one of these balls go bad on me only the bolt used to attach it. The bolt is easily and cheaply replaced.
Love this internally threaded ball. No shank hanging down.
The ball base has no flats to hold with a wrench while tightening. Had to use a piece of rubber with vise grips to tighten. Otherwise an average hitch ball.
Ball was perfect. Took way to long for delivery.
very expensive to get them to canada but only choice i found online. none in canada it seems. use them on my atvs. threads dont get all bashed up. just what i wanted
Worked perfectly with my log splitter. Used a Reese hitch that fit my Gravely tractor
Nice job reminded me of Amazon was able to order it.You contacted me kept me posted and I got my part pretty quick.Thank you
Mounted on my tractor's front-end loade r.
Michael
3/2/2026
Working great still
Kate F.
3/2/2026
Do you have a question about this Trailer Hitch Ball?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
David G.
7/21/2020
I mounted the ball on the inside the bucket on my tractor. I needed a ball that attached with a bolt instead of a threaded shaft on the ball and nut to hold it in place. The shaft would have put the nut on the bottom of the bucket . This would have messed up the threads and the nut so that I couldnt take it off if I needed to. With the bolt attaching the ball the only thing that took wear was the head of the bolt. I use the ball on the inside of the bucket because it is easier for an old man to back my trailers facing the trailer rather than looking over my shoulder.