Add this power regulator to your TorkLift PowerArmor Solar battery box to prevent overcharging. Required when storing 1 battery in a box with (1) 10-watt solar panel. Recommended when storing 3 or fewer batteries in a box with (2) 10-watt panels.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're gonna take a look at the TorkLift 8 amp regulator for TorkLift PowerArmor solar battery boxes. Now this is going to help to make sure that your solar panels don't overcharge the battery in your TorkLift PowerArmor box. It's going to make sure that everything stays charging properly, prevents any overloading. It's required for use for boxes that have a single solar panel and house only one battery and it's recommended for use with boxes that have two 10 watt solar panels and house up to three batteries or fewer.It's pretty easy to install, will just have three attachment points on the regulator itself between one at the top, two at the bottom, and we get the hardware and some isolators to get that installed. We'll get four screws and four isolators and we'll also get two zip ties to get all our wiring tidied up.The end of our wiring for the battery connection is gonna have that J style connector, so we will need to get a J style to connect up to our batteries, or you do have the option of just cutting this off and then wiring it in yourself if you feel comfortable with doing that kind of wiring.And then on the ends for our solar panel, those are gonna have the other end of that J style connector and that's gonna match right up to our solar panels from TorkLift. They'll have the matching end, which is gonna look similar to this, to just plug in and go to work.
So we'll have our two ends for our solar panel so we can get that connected to up to two solar panels, and then our one connection for our battery.Now the length of our wire for the battery is gonna be about 60 inches long, or about five feet, so it should be a good amount of length to get that connected up. And then the length for our solar panels is about 11 inches. We go to kind of the end of the connectors there where the wire'd be coming in.The box itself is about four inches long by about two and a half inches wide and it's about an inch deep. So pretty easy to install. If you're looking for the solar power kits for the TorkLift PowerArmor battery box, we do have those available as well, and those are gonna be part number TLA7713, and you can find those right here at etrailer.com.This product is made in the U.S.A.
and has a one year limited warranty from TorkLift.And that's gonna do it for our look at the TorkLift 8 amp regulator for TorkLift PowerArmor solar battery boxes.
This box has performed exceptionally well. The battery stays charged and is sealed and protected. I highly recommend this box.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.