PullRite Adapter Kit for Mounting Traditional SuperGlide Hitches to ISR or Gooseneck Rail Systems

Video Transcript for Review of Pullrite 5th Wheel Hitch Rails - Adapter Kit - PUL98VR

Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at the Pullrite adapter kit for mounting your traditional SuperGlide hitches to the industry standard rails or your gooseneck rail systems. So this adapter kit right here is for mounting your Pullrite traditional series SuperGlide hitches to the industry standard rails or the gooseneck rail systems. Now those industry standard rails and gooseneck rails are required to be able to use this adapter, and we do sell those items separate on the website. I did wanna pull up an insert. We're gonna first show you this insert is gonna show you those in our industry standard rails, the two at the bottom are your industry standard rails.

And then above that you'll see the pieces. We've got it put together here, but you can see those pieces that go together and insert into there. And I also wanna pop up an insert to show you. We talked about the gooseneck rails. If you look on that, the picture above is still the parts right here that we got together.

And underneath you'll see is the gooseneck rail systems. And both of those, again, are sold separately on our website. Now this is compatible with the Pullrite SuperGlide 4100, 4400 hitches, and even the discontinued 3,300 hitches. This is gonna enable use with OE or aftermarket under-bed gooseneck mounting systems, and the traditional series adapter rails right here and the hardware's all included. This will simplify installation without needing to replace your mounting system.

And this is for a quantity of one adapter kit. But that's gonna do it for a look at the Pullrite adapter kit for your mounting your traditional super light hitches to the industry standard rails or the gooseneck rail systems.