Recommended Adapter to Use a PullRite SuperGlide 4400 5th Wheel Hitch

Updated 12/31/2025 | Published 09/02/2025

Products Featured in This Question

Adapter Rails for 5th Wheel Hitch - GM Towing Prep Package

(16)

$655.23

PullRite Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches - 24K

(2)

$551.00

PullRite Adapter Kit for Mounting Traditional SuperGlide Hitches to ISR or Gooseneck Rail Systems

$402.72

Question:

Looking for adepter for pull right 4400 to fit 2025 GMC 2500

asked by: Rodney K

Expert Reply:

Hey Rodney congrats on the new truck! If your 2025 GMC 2500 has the factory puck system you'll need the Adapter Rails for 5th Wheel Hitch item # PUL69RR, which installs in your puck system and adds industry standard rails.

Since your PullRite SuperGlide 4400 is part of the Traditional Series that uses specific rails, you will also need the PullRite Adapter Kit for Mounting Traditional SuperGlide Hitches to ISR or Gooseneck Rail Systems item # PUL98VR. The adapter kit makes the 4400 ISR compatible so it will fit any standard rail system.

Please note that if you do not have the factory puck system, you'll need to install the PullRite Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches item # PUL22MR and still use the PullRite Adapter Kit item # PUL98VR.

Does your new truck have the factory puck system in the bed?

expert reply by: Jerred H

Jerred H.

9/29/2025

Hey Rodney, did you find out if your new truck has the factory puck system in the bed? I'm asking to see if the solution worked for you and to help others in a similar situation.

Rodney K.

9/29/2025

@JerredH yes my truck has the puck system. I went with a BW hitch because i needed to get the hitch to its lowest point possible

Jerred H.

9/29/2025

@RodneyK That makes complete sense!

Bill G.

12/29/2025

I’m a little confused. I have a 2026 Chevrolet 2500HD with the 5th wheel package already installed. I have a Superglide 4400 that I want to install. What do I need to do this? Thank you.

Jerred H.

12/31/2025

@BillG The Pullrite Superglide 4400 5th wheel hitch doesn't install to standard 5th wheel rails. You'll need the Adapter Rails for 5th Wheel Hitch item # PUL69RR to attach to your Silverado's puck system along with the PullRite Adapter Kit for Mounting Traditional SuperGlide Hitches to ISR or Gooseneck Rail Systems item # PUL98VR. The item # PUL98VR adapter kit provides the base needed for the Pullrite Superglide 4400 to attach to industry standard 5th wheel rails. If you're already using this hitch on 5th wheel rails you just need the Adapter Rails for 5th Wheel Hitch item # PUL69RR.