Aero Crossbar T-Slot Mounting Hardware for Inno Cargo Boxes and Platforms - Qty 4

See what our Experts say about this Inno Accessories and Parts

• Mounting an Inno Cargo Carrier to a Trac Rac Van Rac Ladder Rack
  I have a solution for you, however part # INBRP9 is a replacement part and not intended to fit to a ladder rack. Instead, you'll need to get part # INBRP12, which will fully replace the mounting hardware on an Inno Shadow, Wedge or Stream cargo box and allow it to install to the channels of a Trac Rac Trac Van rack. The included T-Bolts are the correct shape to fit directly into the existing TracRac channel and tall enough to correctly install.
  view full answer...
• What Size Crossbar Channels is Aero Crossbar T-Slot Mounting Hardware # INBRP12 Designed to Fit
  I attached a picture that shows the T-slot dimensions that the Inno T-slot Adapter Kit # INBRP12 is designed to fit. We've found that most roof rack manufacturers make the dimensions of their top channels to be close enough that they allow compatibility but you'd want to check yours to verify.
  view full answer...
  
• Does the Aero Crossbar T-Slot Mounting Hardware for Inno Fit a Shadow Cargo Box and Yakima HD Bars
  Yes, the Aero Crossbar T-Slot Mounting Hardware for Inno Cargo Boxes and Platforms # INBRP12 will work with your Inno Shadow box and the T-slot on the Yakima HD bars.
  view full answer...
• Inno Aero Crossbar T-Slot Mounting Hardware Kit INBRP12 for Stream Cargo Box
  Yes, the Inno T-Slot Mounting Hardware kit # INBRP12 will allow installation of their Stream, Wedge and Shadow cargo boxes in the T-slot channels of their Aero crossbar roof racks.
  view full answer...
• What Dimensions Does Crossbar T-Slot Mounting Hardware for Inno Cargo Boxes # INBRP12 Fit
  I attached a picture that shows the T-slot dimensions that the Inno T-slot Adapter Kit # INBRP12 is designed to fit. We've found that most roof rack manufacturers make the dimensions of their top channels to be close enough that they allow compatibility but you'd want to check yours to verify.
  view full answer...
  
• Compatibility of Inno T-slot Adapter Kit INBRP12 with Thule AeroBlade Crosbars
  The Inno Aero Crossbar T-Slot Mounting Hardware Kit # INBRP12 is compatible with the Thule AeroBlade bar slots. The now-discontinued Inno Lowdown Cruiser cargo box BRA585BK is not compatible with this t-slot kit. The kit WILL work with their Shadow, Wedge, or Stream cargo boxes.
  view full answer...
• Compatibility Of Inno T-Slot Adapter Kit INBRP12 With Yakima Crossbars
  Yes, The Aero Crossbar T-Slot Mounting Hardware for Inno Cargo Boxes and Platforms # INBRP12 will work with your Yakima crossbars with t-slots. This adapter kit lets you mount an Inno cargo box or platform to your Yakima crossbars. This kit works with all Shadow and Wedge series boxes.
  view full answer...
• Does Install of T-Slot Mounting Hardware # INBRP12 Lower Height of Inno Roof Box
  It wouldn't significantly affect the height of the box. The lower profile of the # INBRP12 would be more to do with the fact that claws wouldn't be grabbing around the bars and instead it would look like the box attaches to the bars just by setting on them.
  view full answer...
• Will the Inno Shadow 16 Cargo Box Fit a 2016 Subaru XV Crosstrek
  The Inno Shadow 16 # INBRA1210BK is compatible with crossbar spreads ranging from 23-1/2" - 39". Since it looks like your 2016 Subaru XV Crosstrek has OEM rails that are spaced 27" apart on center this means the Shadow 16 will fit perfectly on your crossbars. You may also want to measure from the center of your rear crossbar to the line between your roof and hatch to make sure you will have unrestricted access to your rear hatch area. If this measures at least 12" then you are good to...
  view full answer...
  
• Will Aero Crossbar T-Slot Mounting Hardware for Inno Make Install Easier
  The Aero Crossbar T-Slot Mounting Hardware Kit part # INBRP12 will give your Inno Roof Deck Platform Rack for Crossbars # INA510 definitely a sleeker and more streamlined look but it's impact on install time won't be as large. I would say it would make it easier but probably not a huge difference.
  view full answer...
• Fitment of Inno Roof Deck Platform Rack # INA510 on 2020 Mazda CX-30 with OEM Crossbars
  There is a way you can definitively determine if the Inno Roof Deck Platform Rack # INA510 fits your crossbars that are elliptical in the front and cut-of square shaped in the back. Since the # INA510 fits both elliptical and square crossbars, the shape of the bars do not make a difference. However, you need to be sure your bars do not exceed 3-1/2" wide x 1-3/8" tall. In order to make sure your crossbars fall within these parameters, I recommend measuring the width and height of your bars....
  view full answer...
• Does Inno Wedge 660 Cargo Box Have Speed Limit
  I checked with Inno, and there is not a set speed limit for the Inno Wedge 660 Rooftop Cargo Box # INBRM660WH. That's not unusual though, as cargo box manufacturers each say to just drive the speed limit; they likely don't want to encourage high speeds. The Wedge 660 # INBRM660WH will easily stay attached to your crossbars at highway speeds with its clamping system, or if you install it in your crossbars' channels with the Aero Crossbar T-Slot Mounting Hardware # INBRP12.
  view full answer...
• T-Bolt And Wing Knob For Yakima Kayak Rack On A RSI SmartCap Camper Shell
  I did some looking around and I found the Replacement M8 T-Bolt for Thule Roof Rack Gutter Feet # 853-0782 with Replacement 3-Wing, High M8 Hand Knob for Thule Roof Mounted Watersport Carriers # 753-0776.
  view full answer...
• How to Mount a Roof Cargo Carrier to Rhino-Rack Reconn Crossbars
  The Reconn-Deck Ladder Rack Crossbars use standard T-Track dimensions so if a roof cargo basket has T-Track mounting hardware you can definitely mount them to the Reconn bars. The Rhino-Rack Roof Mounted Steel Cargo Basket # RMCB02 you're looking at only comes with mounting hardware for clamping around crossbars but it does like you'd be able to swap out some of the hardware for something that mounts into the T-Tracks. We currently don't have a kit built for this so it's something you'd...
  view full answer...
• Recommended Roof Rack and Cargo Box to Clear Rear Hatch of 2020 BMW X3
  I recommend to use the Yakima Roof Rack for the 2020 BMW X3 with part # Y00425 for the JetStream bars, part # Y00145 for the towers and part # Y06031 for the fit kit. The Yakima bars are aerodynamic to eliminate wind noise and also a t-slot to easily mount accessories. I recommend the Inno Wedge 660 Rooftop Cargo Box part # INBRM660BK which is a nice low profile cargo box that is capable of carrying a decent amount of cargo with it's 11 cubic feet of space. It will allow the rear hatch...
  view full answer...
• Cargo Basket Recommendation to Fit Thule TracRac Ladder Rack
  The Thule cargo baskets only use clamp-on mounting hardware designed for standard roof rack crossbars so they won't fit around the TracRac crossbars, but I do have an alternative cargo carrier recommendation with the 55" x 55" Inno Roof Deck Platform Rack # INA520. This comes with quick-mounts for standard crossbars but you can upgrade with the T-Slot Mounting Hardware # INBRP12 which will enable you to install this cargo basket to your TracRac ladder rack. Attached is a review video I...
  view full answer...
• What Brand Roof Cargo Boxes Have T-Slot Adapters Available
  There are T-slot adapters for Thule cargo boxes with the part # TH27PQ and Inno boxes with the part # INBRP12 but at this time Yakima does not offer any adapters like this. I attached a link to this page that shows all of the Inno boxes we offer as well as all of the Thule boxes we offer.
  view full answer...
• Will T-Bolt Hardware Keep Inno Wedge 660 From Touching Glass Roof
  Yes! Using the Aero Crossbar T-Slot Mounting Hardware # INBRP12 will keep your Inno Wedge 660, Black # INBRM660BK or White # INBRM660WH, above your crossbars. The T-Bolts mount into the T-Slots of your Whispbar so you won't have any of the mounting hardware underneath the crossbars.
  view full answer...
• Can I Attach The Inno Box 2020 Rooftop Cargo Box To A Yakima Lock N Load B Platform
  Yes, the Inno Box 2020 Rooftop Cargo Box - 14 cu ft - Matte Black, part # IN86FR, can attach to the Yakima LockNLoad Platform Rack for Crossbars - Aluminum - 60" Long x 54" Wide, part # Y05045-39, with the addition of the Aero Crossbar T-Slot Mounting Hardware for Inno Cargo Boxes and Platforms - Qty 4, part # INBRP12. Unfortunately, none of the Yakima SkyBox models can attach to these platform. I have included product description links and video review links below.
  view full answer...
• Can Roof Rack Cargo Boxes Attach to T-Slots of Roof Rack
  We have T-slot adapters for Thule cargo boxes with the part # TH27PQ and Inno boxes with the part # INBRP12 but at this time Yakima does not offer any adapters like this. I attached a link to this page that shows all of the Inno boxes we offer as well as all of the Thule boxes we offer. The Thule boxes have to be ones that have the PowerClick mounting hardware which means the Motion XT line. The most similar option would be the Thule Motion XT part # TH629706 which has a 16 cubic foot capacity....
  view full answer...
• Can The Inno Locker Watersport Carrier Be Clamped Onto Crossbars?
  I have a solution for you but unfortunately there is not an adapter that will allow the Inno Locker Watersport Carrier - Locking - Channel Mount - 1 Boat or 2 Boards # INXA445 to clamp onto crossbars since it utilizes the T-slot, so you will need to go with a different watersport carrier. If your crossbars are no wider than 3" and no taller than 1-1/4" then the Thule Top Deck Rooftop Kayak Carrier System with Tie Downs # TH881 will clamp-on without an issue. Another option that may work...
  view full answer...
• Roof Basket Recommendation to Fit Thule Xsporter Ladder Rack
  The max crossbar size the Curt Roof Mounted Cargo Basket # C18115-117 will fit is 3" wide x 1-5/8" tall like what you mentioned. Since your crossbars are 3-1/2" wide the U-Bolts won't be able to wrap around them. As an alternative you can use the Inno Roof Deck Platform Rack # INA520. This comes with clamps to fit up to 3-1/2" wide x 1-3/8" tall crossbars so it will still be just too small but you can add the Aero Crossbar T-Slot Mounting Hardware # INBRP12 to mount it via the T-Slots...
  view full answer...
• Roof Cargo Box to Fit Crossbars of Thule TracRac SR Ladder Rack
  The Thule cargo boxes fit crossbars up to 3-1/2" wide x 1-11/16" tall while the crossbars for the Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43003XT-784, that fits your 2017 Ram 1500 5-1/2' bed, measure 4" wide x 1-1/2" tall. Since this is the case I recommend using the Inno Box 2020 # IN86FR instead because it can be mounted inside the T-Slots of the TracRac crossbars using the Hardware Kit # INBRP12. This is currently (January 2022) the only roof cargo box that has the option...
  view full answer...
• Does SkinnyWarrior Roof Cargo Basket Mount with Clamps or in Crossbar Tracks
  The Yakima SkinnyWarrior Roof Cargo Basket # Y07014 uses a clamping system instead of a track mounted system. The U-Bolts ate a bit more sleek looking than the standard U-Bolt kit though as the housing they insert into hide them really well. Track mounted cargo carriers aren't super common but we do have a few options you can check out from Inno with their Shaper 100 # Inno Shaper 100 Roof Cargo Basket - Channel Mount - Aluminum - 46-1/2" x 41-7/8" - 110 lbs Item # INXA569 and their Roof...
  view full answer...

Do you have a question about this Accessories and Part?