Replacement Clamps for Inno Roof Deck Platform Rack # INA510

Question

Question:

Can these clamps be used fir the inno ina510? Thanks!

asked by: Ames M

0

Expert Reply:

Yes, the Memory clamps # INBRP9 are the correct replacement clamps for the Inno Roof deck Platform Rack # INA510.

expert reply by: Jameson C

0

Answer 1

Good question Matt, you've definitely done your homework! Yes, your understanding is correct. The Replacement Fast Grip Clamp #TH94JV is the same mounting clamp used on the Thule Pulse Large cargo box #TH615. The FastGrip clamps are designed to…

view full answer...

Answer 2

The Inno Shadow 16 #INBRA1210BK is compatible with crossbar spreads ranging from 23-1/2" - 39". Since it looks like your 2016 Subaru XV Crosstrek has OEM rails that are spaced 27" apart on center this means the Shadow 16 will fit…

view full answer...

Answer 3

Hey Jamie! Yes, the Malone SlopeSide Ski and Snowboard Carrier #MAL67QR comes with the hardware to mount in the T-slots as well as the clamps. You can see the T-slot adapters at the bottom of the attached picture next to the keys. Any big ski trips…

view full answer...

Answer 4

We sure do Michael. There's two different TruXedo TruXport covers for the 2023 Ram 1500 with a 5'7" bed. We have replacement Middle Support Bows for both of them. I wasn't sure what you meant by box but the difference in the covers…

view full answer...

Answer 5

The Inno Wedge #INBRM864MBK is designed to fit on a variety of different crossbar styles including factory and most aftermarket bars. While I can't tell you specifically whether or not it's going to fit on your 2011 Toyota RAV4, I can tell…

view full answer...

Answer 6

Hello again, Randall, thanks for reaching out. I looked everywhere and I also was not able to find the exact T-slot size listed anywhere. I do know the bars use standard T-slots, so any accessory that is also made for standard T-tracks should work…

view full answer...

Answer 7

They will not Steve. The Elevate crossbars are 3.79" wide x 1-1/2" tall. The Replacement Fast Grip Clamp for Thule Pulse, Rooftop Cargo Boxes item #TH94JV works with crossbars that are no larger than 3-1/2" wide x 1-11/16" tall.…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 10

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 11

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 12

Hey, I totally get why you’re pausing here. The last thing you want is to buy the wrong parts, start drilling into that Leer cap, and end up with something that doesn’t seal or fit right. From what you’re describing, those metal pieces at the four…

view full answer...

Replacement Clamps for Inno Roof Deck Platform Rack # INA510

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching